what's missing: disk idle/busy % and gpu usage %. would appreciate if anyone could add them.
Code: Select all
; Lines starting ; (semicolons) are commented out.
; That is, they do not affect the code and are here for demonstration purposes only.
; ----------------------------------
[Rainmeter]
; This section contains general settings that can be used to change how Rainmeter behaves.
Author=poiru
AppVersion=2003000
Update=1000
Background=#@#Background.png
; #@# is equal to Rainmeter\Skins\illustro\@Resources
BackgroundMode=3
BackgroundMargins=0,34,0,14
[Metadata]
; Contains basic information of the skin.
Description=Displays basic system stats.
License=Creative Commons BY-NC-SA 3.0
Version=1.0.0
[Variables]
; Variables declared here can be used later on between two # characters (e.g. #MyVariable#).
fontName=Trebuchet MS
textSize=8
colorBar=235,170,0,255
colorText=255,255,255,205
; ----------------------------------
; MEASURES return some kind of value
; ----------------------------------
[measureCPU]
; This measure returns the average CPU load between all cores.
Measure=CPU
Processor=0
[measureRAM]
; Returns the amount of RAM used in bytes.
Measure=PhysicalMemory
UpdateDivider=20
; UpdateDivider sets the rate at which the value of the measure is updated. It is
; calculated as follows: UpdateDivider x Update. In this case, Update is set to
; 1000 milliseconds (in the [Rainmeter] section). 1000 x 20 = 20000 ms or 20 seconds.
[measureSWAP]
; Returns the amount of SWAP (pagefile) used in bytes.
Measure=SWAPMemory
UpdateDivider=20
; ----------------------------------
; STYLES are used to "centralize" options
; ----------------------------------
[styleTitle]
StringAlign=CENTER
StringCase=UPPER
StringStyle=BOLD
StringEffect=SHADOW
FontEffectColor=0,0,0,50
FontColor=#colorText#
FontFace=#fontName#
FontSize=10
AntiAlias=1
ClipString=1
[styleLeftText]
StringAlign=LEFT
; Meters using styleLeftText will be left-aligned.
StringCase=NONE
StringStyle=BOLD
StringEffect=SHADOW
FontEffectColor=0,0,0,20
FontColor=#colorText#
FontFace=#fontName#
FontSize=#textSize#
AntiAlias=1
ClipString=1
[styleRightText]
StringAlign=RIGHT
StringCase=NONE
StringStyle=BOLD
StringEffect=SHADOW
FontEffectColor=0,0,0,20
FontColor=#colorText#
FontFace=#fontName#
FontSize=#textSize#
AntiAlias=1
ClipString=1
[styleBar]
BarColor=#colorBar#
BarOrientation=HORIZONTAL
SolidColor=255,255,255,15
; ----------------------------------
; METERS display images, text, bars, etc.
; ----------------------------------
[meterTitle]
Meter=STRING
MeterStyle=styleTitle
; Using MeterStyle=styleTitle will basically "copy" the
; contents of the [styleTitle] section here during runtime.
X=100
Y=12
W=190
H=18
Text="System"
; Even though the text is set to System, Rainmeter will display
; it as SYSTEM, because styleTitle contains StringCase=UPPER.
LeftMouseUpAction=!Execute ["taskmgr.exe"]
; Left-clicking this meter will launch taskmgr.exe (the Task Manager).
ToolTipText="Open Task Manager"
; Hovering over this meter will display a tooltip with the text above.
[meterLabelCPU]
Meter=STRING
MeterStyle=styleLeftText
X=10
Y=40
W=190
H=14
Text="CPU Usage"
[meterValueCPU]
Meter=STRING
MeterStyle=styleRightText
MeasureName=measureCPU
X=200
Y=0r
; r stands for relative. In this case, the Y postition of meterValueCPU is 0 pixels
; below the Y value of the previous meter (i.e it's the same as in meterLabelCPU).
W=190
H=14
Text="%1%"
; %1 stands for the value of MeasureName (measureCPU in this case).
[meterBarCPU]
Meter=BAR
MeterStyle=styleBar
MeasureName=measureCPU
X=10
Y=52
W=190
H=1
[meterLabelRAM]
Meter=STRING
MeterStyle=styleLeftText
X=10
Y=60
W=190
H=14
Text="RAM Usage"
[meterValueRAM]
Meter=STRING
MeterStyle=styleRightText
MeasureName=measureRAM
X=200
Y=0r
W=190
H=14
Text="%1%"
Percentual=1
; Percentual=1 needs to be added her because measureRAM returns the amount
; of RAM used in bytes. Using Percentual=1 will convert that into a percentual value.
[meterBarRAM]
Meter=BAR
MeterStyle=styleBar
MeasureName=measureRAM
X=10
Y=72
W=190
H=1
[meterLabelSWAP]
Meter=STRING
MeterStyle=styleLeftText
X=10
Y=80
W=190
H=14
Text="SWAP Usage"
[meterValueSWAP]
Meter=STRING
MeterStyle=styleRightText
MeasureName=measureSWAP
X=200
Y=0r
W=190
H=14
Text="%1%"
Percentual=1
[meterBarSWAP]
Meter=BAR
MeterStyle=styleBar
MeasureName=measureSWAP
X=10
Y=92
W=190
H=1
[meterLabelUPTIME]
Meter=STRING
MeterStyle=styleLeftText
X=10
Y=98
W=190
H=14
Text="Uptime"
[MeasureUptime]
Measure=Uptime
Format="%3!i! hrs, %2!i! min %1!i! sec"
x=10
y=98
w=190
h=14
[MeterValueUPtime]
Meter=STRING
MeterStyle=styleRightText
MeasureName=MeasureUptime
x=200
y=98
w=190
h=14
;[CORETEMP.INI FOLLOWS]
[MeasureTJMax]
Measure=Plugin
Plugin=CoreTemp
CoreTempType=TjMax
CoreTempIndex=0
[MeasureMaxTemp]
Measure=Plugin
Plugin=CoreTemp
CoreTempType=MaxTemperature
[MeasureCore0Temp]
Measure=Plugin
Plugin=CoreTemp
CoreTempType=Temperature
CoreTempIndex=0
[MeasureCore1Temp]
Measure=Plugin
Plugin=CoreTemp
CoreTempType=Temperature
CoreTempIndex=1
[MeasureCore2Temp]
Measure=Plugin
Plugin=CoreTemp
CoreTempType=Temperature
CoreTempIndex=2
[MeasureCore3Temp]
Measure=Plugin
Plugin=CoreTemp
CoreTempType=Temperature
CoreTempIndex=3
[MeasureCpuSpeed]
Measure=Plugin
Plugin=CoreTemp
CoreTempType=CpuSpeed
[MeasureBusSpeed]
Measure=Plugin
Plugin=CoreTemp
CoreTempType=BusSpeed
[meterMaxTemp]
Meter=STRING
MeasureName=measureTjMax
MeterStyle=styleLeftText
X=10
Y=118
W=190
H=14
Text="Temp Threshold: %1°C"
[MeterCore0]
Meter=STRING
MeterStyle=styleLeftText
MeasureName=MeasureCore0Temp
X=10
Y=158
W=190
H=14
Text="Core 0: %1°C"
[meterValueCore0]
Meter=STRING
MeterStyle=styleRightText
MeasureName=MeasureCore0Temp
X=200
Y=0r
W=190
H=14
Text="%1°C"
[meterLabelCore1]
Meter=STRING
MeterStyle=styleLeftText
MeasureName=MeasureCore1Temp
X=10
Y=178
W=190
H=14
Text="Core 1: %1°C"
[meterValueCore1]
Meter=STRING
MeterStyle=styleRightText
MeasureName=MeasureCore1Temp
X=200
Y=0r
W=190
H=14
Text="%1°C"
[meterCPUSpeed]
Meter=String
MeasureName=MeasureCpuSpeed
MeterStyle=styleLeftText
x=10
y=138
w=198
h=14
Text="Frequency: %1 MHz"
[meterBusSpeed]
Meter=String
MeasureName=MeasureBusSpeed
MeterStyle=styleLeftText
x=10
y=198
w=190
h=14
Text="Bus: %1 MHz"
;[NETWORK.INI FOLLOWS]
[measureIP]
; This measure returns your IP. WebParser measures are relatively complicated. If you're a beginner with
; Rainmeter, take a look at some of the other illustro skins before modifying this one.
Measure=Plugin
Plugin=WebParser
Url=http://checkip.dyndns.org
UpdateRate=14400
RegExp=(?siU)Address: (.*)</body>
StringIndex=1
Substitute="":"N/A"
; Substitute works as follows: "A":"B" where A is a string to substitute and B is a string
; to substitute with. In this case, it substutes "" (i.e. empty) to N/A
[measureNetIn]
Measure=NetIn
NetInSpeed=#maxDownload#
; NetInSpeed must be set so your maximun download speed for the download bar to scale correctly
[measureNetOut]
Measure=NetOut
NetOutSpeed=#maxUpload#
[meterIPLabel]
Meter=String
MeterStyle=styleLeftText
X=10
Y=218
W=190
H=14
Text=IP Address
[meterIPValue]
Meter=String
MeterStyle=styleRightText
MeasureName=measureIP
X=200
Y=0r
; r stands for relative. In this case, the Y postition of meterValueCPU is 0 pixels
; below the Y value of the previous meter (i.e it's the same as in meterLabelCPU).
W=190
H=14
Text=%1
; %1 stands for the value of MeasureName (measureIP in this case).
[meterSeperator]
Meter=Image
MeterStyle=styleSeperator
X=10
Y=52
W=190
H=1
[meterUploadLabel]
Meter=String
MeterStyle=styleLeftText
X=10
Y=238
W=190
H=14
Text=Upload
[meterUploadValue]
Meter=String
MeterStyle=styleRightText
MeasureName=measureNetOut
X=200
Y=0r
W=190
H=14
Text=%1B/s
NumOfDecimals=1
AutoScale=1
; Because measureIP returns the current upload speed in bytes, we must use AutoScale=1 to
; automatically scale the value into a more readable figure.
[meterUploadBar]
Meter=Bar
MeterStyle=styleBar
MeasureName=measureNetOut
X=10
Y=250
W=190
H=1
[meterDownloadLabel]
Meter=String
MeterStyle=styleLeftText
X=10
Y=258
W=190
H=14
Text=Download
[meterDownloadValue]
Meter=String
MeterStyle=styleRightText
MeasureName=measureNetIn
X=200
Y=0r
W=190
H=14
Text=%1B/s
NumOfDecimals=1
AutoScale=1
[meterDownloadBar]
Meter=Bar
MeterStyle=styleBar
MeasureName=measureNetIn
X=10
Y=270
W=190
H=1
