Hey guys... I am new to trying to create skins..
I was wondering if it would be possible to have reainmeter show info in a bar graph, or speedometer of information grabbed from a database... From looking at lua i don't think it would be directly possible. But if i saved the information to a file using php or some other way from the database i could have lua read the file whenever it is saved.
If this is possible can anyone give me a general direction of which meter, and measures need to be used.
Thanks for any help.
It is currently May 4th, 2024, 1:02 pm
Lua, bar graph, lua, and a database.
-
- Posts: 13
- Joined: May 3rd, 2012, 2:10 pm
-
- Posts: 13
- Joined: May 3rd, 2012, 2:10 pm
Re: Lua, bar graph, lua, and a database.
I have been looking at this for a while and though to do something and wanted to get an opinion.
What i can do is use php to create the file as a self describing data set. so have the data saved by php like this.
I could have lua read that file with something along the lines of
I got this striaght from the programinig in lua book that i am trying to read to learn a good way to do all this. But this leads to some questions how can i get this to corispond to a graph within rainmeter.
I am going through the lua tutorial but since i don't know much about lua yet it is still not clicking all the way.
Anyone got any pointers on this.
What i can do is use php to create the file as a self describing data set. so have the data saved by php like this.
Code: Select all
MachineBuilds {
target = "100,000"
actual = "65,00"
projected = "250,000"
}
Code: Select all
local authors = {}
function MachineBuilds (b) target[b.target] = true end
dofile("data")
for name in pairs(authors) do print(name) end
I am going through the lua tutorial but since i don't know much about lua yet it is still not clicking all the way.
Anyone got any pointers on this.
-
- Developer
- Posts: 22631
- Joined: April 19th, 2009, 11:02 pm
- Location: Fort Hunt, Virginia, USA
Re: Lua, bar graph, lua, and a database.
Don't do it that way. The implementation of Lua in Rainmeter does not support .dofile. It would be better if you wrote the file in an XML looking format like:
<target>100000</target>
<actual>6500</actual>
<projected>250000</projected>
Then open the file in Lua, read in the lines and put the values into variables (if there are only a few) or a table (if there are lots or more than one "target", "actual" etc.)
Then you can use those values to drive meters in Rainmeter. I don't know what kind of "graph" you are looking to do in the skin, but you can use the values you read in Lua to !SetVariable some variables in Rainmeter that could be used by a Histogram, Line Meter, or Bar Meter as you like.
<target>100000</target>
<actual>6500</actual>
<projected>250000</projected>
Then open the file in Lua, read in the lines and put the values into variables (if there are only a few) or a table (if there are lots or more than one "target", "actual" etc.)
Then you can use those values to drive meters in Rainmeter. I don't know what kind of "graph" you are looking to do in the skin, but you can use the values you read in Lua to !SetVariable some variables in Rainmeter that could be used by a Histogram, Line Meter, or Bar Meter as you like.
-
- Posts: 13
- Joined: May 3rd, 2012, 2:10 pm
Re: Lua, bar graph, lua, and a database.
thanks for the response... Ok that will work i will look into that here... and the graph choice i am still a little up in the air on... i think it will come down to aesthetics what is easiest to read in a glance here and there..
I am still learning LUA is there a direct approach to the xml...
something like
That would need to be done for each type... target, actual, prjocted, and machine builds.
Just seeing if i am headed in the right way now that dofile is not supported.
I am still learning LUA is there a direct approach to the xml...
something like
Code: Select all
for lines in io.lines(filename)
table.insert(lines, line)
end
for i = 1 , (lines < 4) do
then the rainmeter bang connection for variables here correct.
Just seeing if i am headed in the right way now that dofile is not supported.
-
- Developer
- Posts: 22631
- Joined: April 19th, 2009, 11:02 pm
- Location: Fort Hunt, Virginia, USA
Re: Lua, bar graph, lua, and a database.
Yes, I would do something like that. It will depend some on how much "data" you are reading, but you could use string.match to do a regular expression (more or less) search / capture on the lines of data, then either just assign them to variables or stick them in table(s). Then right, use SKIN:Bang('!SetOption TargetCalc1 Formula '..targetsTable[1]) to set the value of a Calc measure in the skin.syngod wrote:thanks for the response... Ok that will work i will look into that here... and the graph choice i am still a little up in the air on... i think it will come down to aesthetics what is easiest to read in a glance here and there..
I am still learning LUA is there a direct approach to the xml...
something like
That would need to be done for each type... target, actual, prjocted, and machine builds.Code: Select all
for lines in io.lines(filename) table.insert(lines, line) end for i = 1 , (lines < 4) do then the rainmeter bang connection for variables here correct.
Just seeing if i am headed in the right way now that dofile is not supported.
[Target1Calc]
Measure=Calc
Formula=0
MinValue=0
MaxValue=xxxxx
DynamicVariables=1
Then the Bar meter
[Target1Bar]
Meter=Bar
MeasureName=Target1Calc
...
-
- Posts: 13
- Joined: May 3rd, 2012, 2:10 pm
Re: Lua, bar graph, lua, and a database.
Im still not understanding this and i am not sure why.
I got assitance creating the lua script in that board this is now what i have.
Now i figured i would use the round line to do the graphing as i can then put an image under that in a speedometer or non at all and people will see what the sales are.
so this is my .ini
But i realized i am doing this all wrong i need to have something in lua script that runs the bang to update the roundline meter. but i am not sure what exactly i need to do i think it's something like this
But when i tried that it gave me an error in the debugger to say that msales is unbound.
I got assitance creating the lua script in that board this is now what i have.
so this is my .ini
Code: Select all
SKIN:Bang('!SetOption LineLength=sales.machinesales.projected)
-
- Moderator
- Posts: 1931
- Joined: January 29th, 2010, 1:43 am
- Location: Willmar, MN
Re: Lua, bar graph, lua, and a database.
I need a bit more information on what you are wishing to accomplish.
What value to you wish to display, and which value do you wish to compare it to?
Roundlines require that they are passed a value between 0 and 1. That is why need need a number to compare the original value to.
What value to you wish to display, and which value do you wish to compare it to?
Roundlines require that they are passed a value between 0 and 1. That is why need need a number to compare the original value to.
GitHub | DeviantArt | Tumblr
This is the song that never ends. It just goes on and on my friends. Some people started singing it not knowing what it was, and they'll continue singing it forever just because . . .
This is the song that never ends. It just goes on and on my friends. Some people started singing it not knowing what it was, and they'll continue singing it forever just because . . .
-
- Posts: 13
- Joined: May 3rd, 2012, 2:10 pm
Re: Lua, bar graph, lua, and a database.
Oh i thought if you have the max and min value set it would work... The values that i need to show run anywhere from 0 up too 500000 what i want to do with it is to show sales projection and actual sales.. I was thinking that a round line could be used as it could be a simple graph then.
I may not be going at it right... I mean this is really the first time i have had to design anything so im confused at how to make it work.
I may not be going at it right... I mean this is really the first time i have had to design anything so im confused at how to make it work.
-
- Moderator
- Posts: 1931
- Joined: January 29th, 2010, 1:43 am
- Location: Willmar, MN
Re: Lua, bar graph, lua, and a database.
If you set MaxValue=5000 on the measure that you use to drive the Roundline Rainmeter actually just does the math for us.
Currently the information you are returning to Rainmeter from the Lua script is the number of <tags> found and not the actual value you want to use.
There are a couple methods we can use to drive a Roundline from Lua. The question is, do you wish to use more than one Roundline?
Currently the information you are returning to Rainmeter from the Lua script is the number of <tags> found and not the actual value you want to use.
There are a couple methods we can use to drive a Roundline from Lua. The question is, do you wish to use more than one Roundline?
GitHub | DeviantArt | Tumblr
This is the song that never ends. It just goes on and on my friends. Some people started singing it not knowing what it was, and they'll continue singing it forever just because . . .
This is the song that never ends. It just goes on and on my friends. Some people started singing it not knowing what it was, and they'll continue singing it forever just because . . .
-
- Posts: 13
- Joined: May 3rd, 2012, 2:10 pm
Re: Lua, bar graph, lua, and a database.
The hope was to use more then one roundline yes. Or really i could create a seperate skin for each one if that is easier. Then i would only have to use what that person needs so aftermarket would only see after market..
But one skin with multiple roundlines would be best i believe.
But one skin with multiple roundlines would be best i believe.