It is currently September 16th, 2019, 11:47 am

IsFullScreen 3.0

Plugins and Addons popular with the Community
User avatar
balala
Rainmeter Sage
Posts: 8617
Joined: October 11th, 2010, 6:27 pm
Location: Gheorgheni, Romania

Re: IsFullScreen 3.0

balala » April 27th, 2019, 6:17 pm

rockhevy1000 wrote:
April 27th, 2019, 4:26 pm
Yes, that's what I was reading. But as @Kyriakos876 commented that he had found a workaround, I thought it had worked for him.
A workaround would be the following: you have to create a variable (I named it IsExplorer) which will be set to 1 if Explorer is focused and to 0 if it's not. For this you need an IfMatch option. Add it to the [FullscreenCheck] measure, replacing the existing IfCondition:

Code: Select all

[FullscreenCheck]
Measure=Plugin
Plugin=IsFullScreen
IfEqualValue=1
IfEqualAction=[!DeactivateConfig "Simple Epoca\Clock][!DeactivateConfig "A dock"][!DeactivateConfig "Simple Epoca\Player"][!DeactivateConfig "Simple Epoca\Weather"][!DeactivateConfig "TranslucentTaskbar"][!DeactivateConfig "Enmon\Visualizer]
IfBelowValue=1
IfBelowAction=[!ActivateConfig "Simple Epoca\Clock"][!ActivateConfig "A dock"][!ActivateConfig "Simple Epoca\Player"][!ActivateConfig "Simple Epoca\Weather"][!ActivateConfig "TranslucentTaskbar"][!ActivateConfig "Enmon\Visualizer]
IfMatch=(?i)Explore.EXE
IfMatchAction=[!SetVariable IsExplorer "1"]
IfNotMatchAction=[!SetVariable IsExplorer "0"]
See that I kept the IfActions and replaced the IfCondition with the above IfMatch. The appropriate IfMatchAction / IfNotMatchAction set the value of IsExplorer variable to 1 if Explorer is focused and to 0, if it's not. The check isn't case sensitive (due to the (?i) operator).
Now the action needed to be executed can be executed by a new Calc measure, which you have to add:

Code: Select all

[IsExplorerScreen]
Measure=Calc
Formula=( FullscreenCheck * #IsExplorer# )
IfCondition=(#CURRENTSECTION#>=1)
IfTrueAction=[!ActivateConfig "Simple Epoca\Clock"][!ActivateConfig "A dock"][!ActivateConfig "Simple Epoca\Player"][!ActivateConfig "Simple Epoca\Weather"][!ActivateConfig "TranslucentTaskbar"][!ActivateConfig "Enmon\Visualizer]
DynamicVariables=1
rockhevy1000 wrote:
April 27th, 2019, 4:26 pm
This is the problem that I have, there is no window on full screen, but the skins keep saying yes.
Related to this I agree with jsmorley: no issues found so far. Weird.
rockhevy1000
Posts: 5
Joined: April 27th, 2019, 3:25 pm

Re: IsFullScreen 3.0

rockhevy1000 » April 28th, 2019, 5:55 am

balala wrote:
April 27th, 2019, 6:17 pm
A workaround would be the following: you have to create a variable (I named it IsExplorer) which will be set to 1 if Explorer is focused and to 0 if it's not. For this you need an IfMatch option. Add it to the [FullscreenCheck] measure, replacing the existing IfCondition:

Code: Select all

[FullscreenCheck]
Measure=Plugin
Plugin=IsFullScreen
IfEqualValue=1
IfEqualAction=[!DeactivateConfig "Simple Epoca\Clock][!DeactivateConfig "A dock"][!DeactivateConfig "Simple Epoca\Player"][!DeactivateConfig "Simple Epoca\Weather"][!DeactivateConfig "TranslucentTaskbar"][!DeactivateConfig "Enmon\Visualizer]
IfBelowValue=1
IfBelowAction=[!ActivateConfig "Simple Epoca\Clock"][!ActivateConfig "A dock"][!ActivateConfig "Simple Epoca\Player"][!ActivateConfig "Simple Epoca\Weather"][!ActivateConfig "TranslucentTaskbar"][!ActivateConfig "Enmon\Visualizer]
IfMatch=(?i)Explore.EXE
IfMatchAction=[!SetVariable IsExplorer "1"]
IfNotMatchAction=[!SetVariable IsExplorer "0"]
See that I kept the IfActions and replaced the IfCondition with the above IfMatch. The appropriate IfMatchAction / IfNotMatchAction set the value of IsExplorer variable to 1 if Explorer is focused and to 0, if it's not. The check isn't case sensitive (due to the (?i) operator).
Now the action needed to be executed can be executed by a new Calc measure, which you have to add:

Code: Select all

[IsExplorerScreen]
Measure=Calc
Formula=( FullscreenCheck * #IsExplorer# )
IfCondition=(#CURRENTSECTION#>=1)
IfTrueAction=[!ActivateConfig "Simple Epoca\Clock"][!ActivateConfig "A dock"][!ActivateConfig "Simple Epoca\Player"][!ActivateConfig "Simple Epoca\Weather"][!ActivateConfig "TranslucentTaskbar"][!ActivateConfig "Enmon\Visualizer]
DynamicVariables=1
Related to this I agree with jsmorley: no issues found so far. Weird.
Thanks for the help, the solution works!
Maybe, is due to the versions of the O.S. (Windows 10, version 1809), language or something about that.
User avatar
balala
Rainmeter Sage
Posts: 8617
Joined: October 11th, 2010, 6:27 pm
Location: Gheorgheni, Romania

Re: IsFullScreen 3.0

balala » April 28th, 2019, 10:30 am

rockhevy1000 wrote:
April 28th, 2019, 5:55 am
Thanks for the help, the solution works!
I'm glad.
rockhevy1000 wrote:
April 28th, 2019, 5:55 am
Maybe, is due to the versions of the O.S. (Windows 10, version 1809), language or something about that.
I doubt. Please pack the whole config and upload it with a detailed description of what you do when get the issue.
rockhevy1000
Posts: 5
Joined: April 27th, 2019, 3:25 pm

Re: IsFullScreen 3.0

rockhevy1000 » April 29th, 2019, 1:41 pm

balala wrote:
April 28th, 2019, 10:30 am
I doubt. Please pack the whole config and upload it with a detailed description of what you do when get the issue.
Hello, this is what you mean? The code of the skin was thus finally. And I didn't do anything, just click on the desktop.

Code: Select all

[Rainmeter]
Update=3000
; Lines beginning with a semicolon are code comments.
; They are here to help you understand the functions in this skin.

; Checks for fullscreen once every three seconds.
; If you paste a part of this skin into another, be sure that it updates at a reasonable rate.
; Too slow and it will be slow to toggle your skins.
; Too fast and it will drain resources unnecessarily.
; 1000-10000 is a reasonable range.


[Metadata]
Author=rockhevy1000
Information=This is a fork of GlobTwo's FullScreenSwitch skin, that uses JSMorley's IsFullScreen plugin to switch skins on and off during gaming. Or fullscreen Youtube. Or anything running in fullscreen, really. In the original code when you are in the desktop or click in the wallpaper, the plugin detects the process Explorer.EXE as a fullscreen and deactivate the skins. The improve is a workaround to this issue. Also, helps if you want to blacklist certain process of your PC. Thanks to the rainmeter's community for the support and help with the codding. Edit the skin, in the code, are the instructions about what you have to do to make it work.


; You can cut and paste the section below into any skin, but it must stay open during fullscreen. In other words, don't put this into a skin you intend to automatically turn off.
[FullscreenCheck]
Measure=Plugin
Plugin=IsFullScreen
IfEqualValue=1
; Here is where you specify which skins to activate/deactivate. Be sure to add skins to both this list and the activation list below. Check your skins folders for the correct names.
IfEqualAction=[!DeactivateConfig "Simple Epoca\Clock][!DeactivateConfig "A dock"][!DeactivateConfig "Simple Epoca\Player"][!DeactivateConfig "Simple Epoca\Weather"][!DeactivateConfig "TranslucentTaskbar"][!DeactivateConfig "Enmon\Visualizer]
IfBelowValue=1
; And to turn skins back on when not in fullscreen:
IfBelowAction=[!ActivateConfig "Simple Epoca\Clock"][!ActivateConfig "A dock"][!ActivateConfig "Simple Epoca\Player"][!ActivateConfig "Simple Epoca\Weather"][!ActivateConfig "TranslucentTaskbar"][!ActivateConfig "Enmon\Visualizer]
; Here is where you specify which process to blacklist. You need to create another IfMatch and his actions and variables. Be sure to no conflict between them.
IfMatch=(?i)Explorer.EXE
IfMatchAction=[!SetVariable IsExplorer "1"]
IfNotMatchAction=[!SetVariable IsExplorer "0"]
[IsExplorerScreen]
Measure=Calc
; Here is where you specify the variables. You need to put the name in the Formula=.
Formula=( FullscreenCheck * #IsExplorer# )
IfCondition=(#CURRENTSECTION#>=1)
; Here is where you specify which skins are maintained activated. You can copy the list in the IfBelowAction= to make it easier
IfTrueAction=[!ActivateConfig "Simple Epoca\Clock"][!ActivateConfig "A dock"][!ActivateConfig "Simple Epoca\Player"][!ActivateConfig "Simple Epoca\Weather"][!ActivateConfig "TranslucentTaskbar"][!ActivateConfig "Enmon\Visualizer]
DynamicVariables=1
; End cut and paste.


[String]
Meter=String
User avatar
balala
Rainmeter Sage
Posts: 8617
Joined: October 11th, 2010, 6:27 pm
Location: Gheorgheni, Romania

Re: IsFullScreen 3.0

balala » April 29th, 2019, 3:27 pm

rockhevy1000 wrote:
April 29th, 2019, 1:41 pm
Hello, this is what you mean? The code of the skin was thus finally. And I didn't do anything, just click on the desktop.
Yep, that's needed, however I don't know what to say, because I can't replicate the issue. Using the original code, posted into the first post of this topic by jsmorely, if I click the desktop, the skin says Desktop, not Explorer. Still don't know what are you doing, to get the skin to return Explorer.EXE.
rockhevy1000
Posts: 5
Joined: April 27th, 2019, 3:25 pm

Re: IsFullScreen 3.0

rockhevy1000 » April 30th, 2019, 2:25 pm

balala wrote:
April 29th, 2019, 3:27 pm
Yep, that's needed, however I don't know what to say, because I can't replicate the issue. Using the original code, posted into the first post of this topic by jsmorely, if I click the desktop, the skin says Desktop, not Explorer. Still don't know what are you doing, to get the skin to return Explorer.EXE.
Like I say it before, maybe is a problem related to Windows itself. I checked my code and the jsmorely's code so many times and the plugins keep saying me Explorer.exe.
Also, check the plugin version and it's ok.

This is a completely different case, not related at all and different code, but it has the same problem. Windows says explorer.exe is full screen. I was reading about reg exp, but I'm not a programmer, therefore I do not fully understand the dll code.
https://stackoverflow.com/questions/39133181/detecting-if-a-window-is-full-screen

Image Image

Also, and this has happened to me about 3 times, the skin does "detect" the Explorer.exe and puts it as "Desktop" after clicking on the wallpaper.
Image
User avatar
balala
Rainmeter Sage
Posts: 8617
Joined: October 11th, 2010, 6:27 pm
Location: Gheorgheni, Romania

Re: IsFullScreen 3.0

balala » April 30th, 2019, 3:15 pm

rockhevy1000 wrote:
April 30th, 2019, 2:25 pm
Also, and this has happened to me about 3 times, the skin does "detect" the Explorer.exe and puts it as "Desktop" after clicking on the wallpaper.
Image
If you click the desktop, it has to say Desktop, but as both of us, jsmorley and me said before, unfortunately we can't replicate the issue, so have no idea what to say.
User avatar
kyriakos876
Posts: 915
Joined: January 30th, 2017, 2:01 am
Location: Greece

Re: IsFullScreen 3.0

kyriakos876 » May 3rd, 2019, 9:51 am

rockhevy1000 wrote:
April 27th, 2019, 3:37 pm
Hello, I tried your solution, but keep sending me this error

This is my code

Code: Select all

[FullscreenCheck]
Measure=Plugin
Plugin=IsFullScreen

IfEqualValue=1
IfEqualAction=[!DeactivateConfig "Simple Epoca\Clock][!DeactivateConfig "A dock"][!DeactivateConfig "Simple Epoca\Player"][!DeactivateConfig "Simple Epoca\Weather"][!DeactivateConfig "TranslucentTaskbar"][!DeactivateConfig "Enmon\Visualizer]

IfBelowValue=1
IfBelowAction=[!ActivateConfig "Simple Epoca\Clock"][!ActivateConfig "A dock"][!ActivateConfig "Simple Epoca\Player"][!ActivateConfig "Simple Epoca\Weather"][!ActivateConfig "TranslucentTaskbar"][!ActivateConfig "Enmon\Visualizer]

IfCondition=(FullscreenCheck=1) && ([FullscreenCheck:] <> "Explorer.EXE")
IfTrueAction=[!ActivateConfig "Simple Epoca\Clock"][!ActivateConfig "A dock"][!ActivateConfig "Simple Epoca\Player"][!ActivateConfig "Simple Epoca\Weather"][!ActivateConfig "TranslucentTaskbar"][!ActivateConfig "Enmon\Visualizer]
And this is the error
Syntax error: IfCondition=(FullscreenCheck=1) && (0 <> "Explorer.EXE")

Do you (or anyone) has and idea what I'm doing wrong?
Sorry for the late reply and confusion. I see the issue has been resolved but I just want to make myself clear for future references:
As you and Jsmorley said this should and does throw and error for the mentioned reasons. I later figured it out as well and added the [FullscreenCheck:] result in a variable and then check if THAT matches with "Explorer.exe" in a different measure. If it does, it creates a variable with the value of 1 that is the actual variable for the IfCondition along with the FullscreenCheck which is already a number. I edited my first post to avoid future confusion.
gran172
Posts: 13
Joined: May 16th, 2019, 3:51 am

Re: IsFullScreen 3.0

gran172 » May 16th, 2019, 4:24 am

Hello, I created an account to mention that I'm also having this issue where IsFullScreen 3.0 detects desktop as fullscreen and the "FullscreenSwitch" skin unloads my other skins whenever I click on desktop.
User avatar
Virginityrocks
Posts: 510
Joined: February 26th, 2011, 10:22 pm

Re: IsFullScreen 3.0

Virginityrocks » June 3rd, 2019, 11:10 pm

gran172 wrote:
May 16th, 2019, 4:24 am
Hello, I created an account to mention that I'm also having this issue where IsFullScreen 3.0 detects desktop as fullscreen and the "FullscreenSwitch" skin unloads my other skins whenever I click on desktop.
This is what I would do:

Code: Select all

[MeasureIsFullScreen]
Measure=Plugin
Plugin=IsFullScreen
IfCondition=MeasureIsFullScreen=1
IfTrueAction=[!EnableMeasure CheckProcess]

[CheckProcess]
Measure=String
String=[MeasureIsFullScreen]
IfNotMatch=Explorer.EXE
IfNotMatchAction=[!DeactivateConfig ***YOUR CONFIGS***][!DisableMeasure #CURRENTSECTION#]
IfMatch=Explorer.EXE
IfMatchAction=[!DisableMeasure #CURRENTSECTION#]
Disabled=1