Hi raiguard!
Big fan of your work, thanks a lot!! I was wondering if you could add a toggle in Disks Meter to show the free space left instead of the used one. I changed InvertMeasure= from 1 to 0 in [MeasureDiskCSpaceUsed] and it works fine, but it goes away with each update
Thanks again!
It is currently April 18th, 2024, 7:28 am
ModernGadgets 1.8.2
-
- Posts: 2
- Joined: January 14th, 2019, 7:18 am
-
- Posts: 3
- Joined: February 12th, 2019, 11:54 am
Re: ModernGadgets 1.4.1
raiguard
Just wanted to say love your work!
Are you able to add a WIFI status module?
I connect to LAN and then also to a different Wifi, would be great to see the SSID in the list.
Just wanted to say love your work!
Are you able to add a WIFI status module?
I connect to LAN and then also to a different Wifi, would be great to see the SSID in the list.
-
- Posts: 660
- Joined: June 25th, 2015, 7:02 pm
- Location: The Sky, USA
Re: ModernGadgets 1.4.1
Sorry for the late reply, I forgot about you.artistadelapista wrote: ↑January 14th, 2019, 7:25 am Hi raiguard!
Big fan of your work, thanks a lot!! I was wondering if you could add a toggle in Disks Meter to show the free space left instead of the used one. I changed InvertMeasure= from 1 to 0 in [MeasureDiskCSpaceUsed] and it works fine, but it goes away with each update
Thanks again!
Sure thing, it only took me literally five minutes to add so I did it. It'll be available in the next beta.
-
- Posts: 660
- Joined: June 25th, 2015, 7:02 pm
- Location: The Sky, USA
Re: ModernGadgets 1.4.1
I already added these features in Network Meter for the next version. You can get them now by clicking "opt-in to development testing" button in the global settings. These things only appear in the tooltip when you hover over the WiFi icon, but I am considering adding the SSID to the actual main display as well. We'll see.
-
- Posts: 3
- Joined: February 12th, 2019, 11:54 am
Re: ModernGadgets 1.4.1
Hmm, not seeing that Wifi icon?raiguard wrote: ↑February 12th, 2019, 8:07 pm I already added these features in Network Meter for the next version. You can get them now by clicking "opt-in to development testing" button in the global settings. These things only appear in the tooltip when you hover over the WiFi icon, but I am considering adding the SSID to the actual main display as well. We'll see.
I've downloaded your Beta version from Github and still dont see it with that Opt in box ticked.
-
- Posts: 660
- Joined: June 25th, 2015, 7:02 pm
- Location: The Sky, USA
Re: ModernGadgets 1.4.1
That's odd, it shows up just fine for me...
What are you network interface settings set to? Are you connected to both ethernet and wifi at the same time?
You do not have the required permissions to view the files attached to this post.
-
- Posts: 3
- Joined: February 12th, 2019, 11:54 am
Re: ModernGadgets 1.4.1
Connected to both, I have two connections to connect to. That could be why!
-
- Developer
- Posts: 22629
- Joined: April 19th, 2009, 11:02 pm
- Location: Fort Hunt, Virginia, USA
Re: ModernGadgets 1.4.1
If you have both wired and wireless connections active, Rainmeter will prefer the wired connection when using Interface=Best in network measures.
-
- Posts: 660
- Joined: June 25th, 2015, 7:02 pm
- Location: The Sky, USA
Re: ModernGadgets 1.4.1
Yes, this. As jsmorley said, the WiFi icon display will represent what Rainmeter selects to be the "best" adapter.
If you want to override this, go into Network Meter's code, scroll down to [MeasureAdapterName], and replace SysInfoData=Best with the name of your WiFi interface. This should hopefully cause the icon to switch to the WiFi symbol. You'll have to redo this change every time you update the suite though.
-
- Posts: 2
- Joined: January 14th, 2019, 7:18 am