Help to assemble a formula

arcanosa84 · Post by **arcanosa84** » September 14th, 2023, 4:26 am

Yincognito wrote: ↑September 14th, 2023, 3:50 am Nah, I already guided you on that. I told you, you skipped the step about updating this measure after setting Pag, when changing pages.

I had already tried this way and it didn't work, so I was left wondering how to do it correctly. [!UpdateMeasureGroup Comp] The idea would be to update them all, so I wanted to do it by group because there will be several, so as not to have to add one by one.

[!UpdateMeasureGroup Comp]

Code: Select all

[CambiodePaginaSig]
Meter = Image
ImageName = #@#\Images\Settings\Siguiente.png
ImageTint = #ColorBotPag#
x = 691
y = 453
LeftMouseUpAction=[!HideMeterGroup Pag1][!ShowMeterGroup Pag2][!ShowMeter "CambiodePaginaAnt"][!HideMeter "CambiodePaginaSig"][!SetVariable Pagina 2][!UpdateMeasureGroup Comp][!UpdateMeter *][!Redraw]
ToolTipType=1
ToolTipText=Siguiente

arcanosa84 · Post by **arcanosa84** » September 14th, 2023, 4:39 am

Yincognito wrote: ↑September 14th, 2023, 4:13 am And... now we're back again to square one, unfortunately. Just follow the steps I described earlier, nothing more and nothing less, and you should be fine.

I didn't check the full code, but based on your description, this is one way to achieve what you want:
- remove the Disabled=1 line from MeasureActive1, since as I said, disabling it simply cancels the check entirely, regardless of what page you are on.

*remove the Disabled=1 line from MeasureActive1

- Define a new variable containing the page number you are on and initialize it to the home page (1, I assume), in [Variables]; then make sure to set
this new variable into the corresponding page number when you change pages by clicking the arrows or whatever (remember to have DynamicVariables=1 on those arrow meters, if they don't already have it; you can temporarily use !Log right after setting the variable to test if the page number is changed correctly on click)

*in variables add

Code: Select all

[Variables]
.
Page=1
.

Code: Select all

[NextPageChange]
Meter = Image
ImageName = #@#\Images\Settings\Next.png
ImageTint = #ColorBotPag#
x = 691
y = 453
LeftMouseUpAction=[!HideMeterGroup Page1][!ShowMeterGroup Page2][!ShowMeter "PreviousPageChange"][!HideMeter "NextPageChange"][!SetVariable Page 2][!UpdateMeasureGroup Comp][!UpdateMeter *][!Redraw]
ToolTipType=1
ToolTipText=Next
DynamicVariables=1

[PreviousPageChange]
Meter = Image
ImageName = #@#\Images\Settings\Previous.png
ImageTint = #ColorBotPag#
x = -7
y = 453
LeftMouseUpAction=[!HideMeterGroup Page2][!ShowMeterGroup Page1][!ShowMeter "NextPageChange"][!HideMeter "PreviousPageChange"][!SetVariable Page 1][!UpdateMeter *][!Redraw]
ToolTipType=1
ToolTipText=Previous
DynamicVariables=1
Hidden=1

- also when changing pages by clicking the arrows, but AFTER setting the above variable, update MeasureActive1 so that the check/condition is also executed at that time, since now
we have a numeric value containing the page number in the new variable above, We can incorporate an appropriate test on that in the existing condition of MeasureActive1, so that the buttons you mentioned are displayed if Luna is active AND the page number is 2. The bottom line is, don't limit yourself to the system you already have. Be creative, if you need something and don't have it, create it yourself so that it fits your objective and you can use it wherever you imagine. Adapt the code to what you need.

*This was what I added to update the active skin check group.
[!UpdateMeasureGroup Comp]

and in MeasureActive1

Code: Select all

[MeasureActive1]
Group=Comp
Measure=Plugin
Plugin=ConfigActive
ConfigName=#Config1#
DynamicVariables=1
IfCondition=(#Page#=2?MeasureActive1:0) = 1
IfTrueAction=[!ShowMeter ColorLunaAtmB][!ShowMeter ColorLunaPlaB][!ShowMeter MeterName45][!UpdateMeter *][!Redraw]
IfFalseAction=[!HideMeter ColorLunaAtmB][!HideMeter ColorLunaPlaB][!HideMeter MeterName45][!UpdateMeter *][!Redraw]

That was the follow-up that I did of the indicated steps, and I know that the updating part is where I could be wrong, but I think that this is how it should work, that is why I asked you to rectify what I did wrong, it is not giving me the solution, but if what you believe is wrong, and you don't tell me, pummmm

, my brain no longer solved it in one

Post by **Yincognito** » September 14th, 2023, 11:05 am

arcanosa84 wrote: ↑September 14th, 2023, 4:39 am *remove the Disabled=1 line from MeasureActive1

*in variables add
Code: Select all
[Variables]
.
Page=1
.
Code: Select all
[NextPageChange]
Meter = Image
ImageName = #@#\Images\Settings\Next.png
ImageTint = #ColorBotPag#
x = 691
y = 453
LeftMouseUpAction=[!HideMeterGroup Page1][!ShowMeterGroup Page2][!ShowMeter "PreviousPageChange"][!HideMeter "NextPageChange"][!SetVariable Page 2][!UpdateMeasureGroup Comp][!UpdateMeter *][!Redraw]
ToolTipType=1
ToolTipText=Next
DynamicVariables=1

[PreviousPageChange]
Meter = Image
ImageName = #@#\Images\Settings\Previous.png
ImageTint = #ColorBotPag#
x = -7
y = 453
LeftMouseUpAction=[!HideMeterGroup Page2][!ShowMeterGroup Page1][!ShowMeter "NextPageChange"][!HideMeter "PreviousPageChange"][!SetVariable Page 1][!UpdateMeter *][!Redraw]
ToolTipType=1
ToolTipText=Previous
DynamicVariables=1
Hidden=1
*This was what I added to update the active skin check group.
[!UpdateMeasureGroup Comp]

and in MeasureActive1
Code: Select all
[MeasureActive1]
Group=Comp
Measure=Plugin
Plugin=ConfigActive
ConfigName=#Config1#
DynamicVariables=1
IfCondition=(#Page#=2?MeasureActive1:0) = 1
IfTrueAction=[!ShowMeter ColorLunaAtmB][!ShowMeter ColorLunaPlaB][!ShowMeter MeterName45][!UpdateMeter *][!Redraw]
IfFalseAction=[!HideMeter ColorLunaAtmB][!HideMeter ColorLunaPlaB][!HideMeter MeterName45][!UpdateMeter *][!Redraw]
That was the follow-up that I did of the indicated steps, and I know that the updating part is where I could be wrong, but I think that this is how it should work, that is why I asked you to rectify what I did wrong, it is not giving me the solution, but if what you believe is wrong, and you don't tell me, pummmm , my brain no longer solved it in one

I think updating the measure via the group it belongs to is fine, if you don't have some other measure in that group messing with these actions. I meant to replace the conditional you came up with in the IfCondition, with the approach I suggested, i.e. testing if Luna is active AND #Pag# is 2. Come on now, as "deficient" as you claim it to be, the page on IfConditions in the manual tells you everything about that, it even gives you examples of how to do it.

If the unlikely case where the above doesn't work, you can try using the nested syntax for the page number in the IfCondition, e.g. [#Pag].

Post by **Yincognito** » September 14th, 2023, 11:15 am

And this is how it went in the other thread, folks - every time some basic suggestion not being put into practice and requiring repeating it ad infinitum, despite the availability of the info about it in the docs or some other code already implemented...

Post by **balala** » September 14th, 2023, 12:27 pm

arcanosa84 wrote: ↑September 13th, 2023, 10:30 pm Well yes, that was the detail I was missing, in reality I forgot that if the variable is going to change you have to put DynamicVariables=1 but well I keep checking that every time, thanks for the help

Glad to help.
Keep in mind that the !SetVariable bang requires to set the DynamicVariables=1 option on every measure and meter on which you want to use the variable.
However even if it'd be logic to have to set the same option for the !SetOption bang as well, this is not quite so, !SetOption not requiring the DynamicVariables=1 option on the section you're modifying with the bang. In fact this bang sets the section dynamic for one single update cycle, when is applied. A few details here.

arcanosa84 · Post by **arcanosa84** » September 14th, 2023, 11:09 pm

Yincognito wrote: ↑September 14th, 2023, 11:15 am And this is how it went in the other thread, folks - every time some basic suggestion not being put into practice and requiring repeating it ad infinitum, despite the availability of the info about it in the docs or some other code already implemented...

My friend, I think you should think a little about the fact that we all do not have the same reaction speed, and even more so in a totally new field, and if you don't tell me about the 5 proposed changes, this step is wrong, why should it be like this, or use such a variant, I would learn much more than doing wrong tests and in the end being left with a lot of doubts, of course I read the manual the IfCondition part, but as they explain there it is about the same measurement, and here we have 2 variables to check , that's why I fall into that zone that you don't like, and of course, I don't either.

Omitting the part that makes me feel bad, here I make another proposal based on what you sent me to study.

When the page changes it would look like this, I tried the Log to see the change of the Page variable and if it changes.

Code: Select all

[Variables]
Pagina=1

[CambiodePaginaSig]
Meter = Image
ImageName = #@#\Images\Settings\Siguiente.png
ImageTint = #ColorBotPag#
x = 691
y = 453
LeftMouseUpAction=[!HideMeterGroup Pag1][!ShowMeterGroup Pag2][!ShowMeter "CambiodePaginaAnt"][!HideMeter "CambiodePaginaSig"][!SetVariable Pagina 2][!UpdateMeasureGroup Comp][!UpdateMeter *][!Redraw]
ToolTipType=1
ToolTipText=Siguiente
DynamicVariables=1

[CambiodePaginaAnt]
Meter = Image
ImageName = #@#\Images\Settings\Anterior.png
ImageTint = #ColorBotPag#
x = -7
y = 453
LeftMouseUpAction=[!HideMeterGroup Pag2][!ShowMeterGroup Pag1][!ShowMeter "CambiodePaginaSig"][!HideMeter "CambiodePaginaAnt"][!SetVariable Pagina 1][!UpdateMeter *][!Redraw]
ToolTipType=1
ToolTipText=Anterior
DynamicVariables=1
Hidden=1

And in the Moon Skin active status checker like this.

Code: Select all

[MeasureActive1]
Group=Comp
Measure=Plugin
Plugin=ConfigActive
ConfigName=#Config1#
DynamicVariables=1
IfCondition=(MeasureActive1 = 1) && (#Pagina# = 2)
IfTrueAction=[!ShowMeter ColorLunaAtmB][!ShowMeter ColorLunaPlaB][!ShowMeter MeterNombre45][!UpdateMeter *][!Redraw]
IfFalseAction=[!HideMeter ColorLunaAtmB][!HideMeter ColorLunaPlaB][!HideMeter MeterNombre45][!UpdateMeter *][!Redraw]

Being on the second page, if I open and close the Moon Skin, it recognizes it and hides, but when I enter the second page it does not update.
That doesn't work for me, the moon checker still doesn't update when I go to the 2nd page and it's not active, the buttons should be hidden and it doesn't work.

arcanosa84 · Post by **arcanosa84** » September 14th, 2023, 11:13 pm

balala wrote: ↑September 14th, 2023, 12:27 pm Glad to help.
Keep in mind that the !SetVariable bang requires to set the DynamicVariables=1 option on every measure and meter on which you want to use the variable.
However even if it'd be logic to have to set the same option for the !SetOption bang as well, this is not quite so, !SetOption not requiring the DynamicVariables=1 option on the section you're modifying with the bang. In fact this bang sets the section dynamic for one single update cycle, when is applied. A few details here.

It's learned, my friend Yincognito had already explained it to me, but it's like I tell him all the time, I make mistakes because I dare and well, one group works well for me and another not so much, but I kind of lose my patience very quickly, There I am immersed in doing something, which I know is very simple for him but it is difficult, and I can't manage it, you must have read if you are aware of this thread, I can't get the active skin check to update at the right time.
But here I am trying hard until I achieve it, and then setting myself another challenge and so on, until at some point I manage to develop the code on my own without much help. and of course for that I count on you who are the most prepared.

Post by **Yincognito** » September 15th, 2023, 8:05 am

arcanosa84 wrote: ↑September 14th, 2023, 11:09 pm My friend, I think you should think a little about the fact that we all do not have the same reaction speed, and even more so in a totally new field, and if you don't tell me about the 5 proposed changes, this step is wrong, why should it be like this, or use such a variant, I would learn much more than doing wrong tests and in the end being left with a lot of doubts, of course I read the manual the IfCondition part, but as they explain there it is about the same measurement, and here we have 2 variables to check , that's why I fall into that zone that you don't like, and of course, I don't either.

Omitting the part that makes me feel bad, here I make another proposal based on what you sent me to study.

When the page changes it would look like this, I tried the Log to see the change of the Page variable and if it changes.
Code: Select all
[Variables]
Pagina=1

[CambiodePaginaSig]
Meter = Image
ImageName = #@#\Images\Settings\Siguiente.png
ImageTint = #ColorBotPag#
x = 691
y = 453
LeftMouseUpAction=[!HideMeterGroup Pag1][!ShowMeterGroup Pag2][!ShowMeter "CambiodePaginaAnt"][!HideMeter "CambiodePaginaSig"][!SetVariable Pagina 2][!UpdateMeasureGroup Comp][!UpdateMeter *][!Redraw]
ToolTipType=1
ToolTipText=Siguiente
DynamicVariables=1

[CambiodePaginaAnt]
Meter = Image
ImageName = #@#\Images\Settings\Anterior.png
ImageTint = #ColorBotPag#
x = -7
y = 453
LeftMouseUpAction=[!HideMeterGroup Pag2][!ShowMeterGroup Pag1][!ShowMeter "CambiodePaginaSig"][!HideMeter "CambiodePaginaAnt"][!SetVariable Pagina 1][!UpdateMeter *][!Redraw]
ToolTipType=1
ToolTipText=Anterior
DynamicVariables=1
Hidden=1
And in the Moon Skin active status checker like this.
Code: Select all
[MeasureActive1]
Group=Comp
Measure=Plugin
Plugin=ConfigActive
ConfigName=#Config1#
DynamicVariables=1
IfCondition=(MeasureActive1 = 1) && (#Pagina# = 2)
IfTrueAction=[!ShowMeter ColorLunaAtmB][!ShowMeter ColorLunaPlaB][!ShowMeter MeterNombre45][!UpdateMeter *][!Redraw]
IfFalseAction=[!HideMeter ColorLunaAtmB][!HideMeter ColorLunaPlaB][!HideMeter MeterNombre45][!UpdateMeter *][!Redraw]
Being on the second page, if I open and close the Moon Skin, it recognizes it and hides, but when I enter the second page it does not update.
That doesn't work for me, the moon checker still doesn't update when I go to the 2nd page and it's not active, the buttons should be hidden and it doesn't work.

You didn't add the updating of the Comp group to CambiodePaginaAnt...

arcanosa84 · Post by **arcanosa84** » September 15th, 2023, 2:10 pm

Yincognito wrote: ↑September 15th, 2023, 8:05 am You didn't add the updating of the Comp group to CambiodePaginaAnt...

Even after adding it, it still doesn't work, the active skin check does not update when I change pages, I give you the complete code if you want to try it

Code: Select all

[Rainmeter]
Update=500
Author=AlexSoft
DynamicWindowSize=1
AccurateText=1


[Variables]
@Include=#@#\Config\Variables.inc
@Include2=#@#\Config\Styles.inc
@Include3=#@#\Config\Links.inc
@Include4=#@#\Config\Default.inc

Pagina=1

; Poner en 1 los 2 para poner en funcion las 2 paginas
HideGroup2=1

Config1=@Al\Planetas\Luna
Config2=@Al\Planetas\Sol
Config3=@Al\Graficos\FanSystem

;-----------------------------------------------------------
;     Rectangulos Skin General
;-----------------------------------------------------------

[MeterSettingsBg]
Meter=Shape
X=0
Y=40
Shape=Rectangle 1,1,720,440 | Fill Color 100,100,100 | Stroke Color 255,255,255,255

[MeterSettingsBg2]
Meter=Shape
X=0
Y=0
Shape=Rectangle 1,1,720,40 | Fill Color 64,154,255 | Stroke Color 255,255,255,255

[MeterClose]
Meter=Shape
X=688
Y=10
Shape=Rectangle 1,1,21,20 | Fill Color 0,0,0,0 | Stroke Color 0,0,0

[CloseHover]
Meter=Shape
Shape=Rectangle 0,0,21,20 | Fill Color 255,0,0,155 | StrokeWidth 0
x=1r
y=1r
Hidden=1

[MeterUpdate]
Meter=Shape
X=658
Y=10
Shape=Rectangle 1,1,21,20 | Fill Color 0,0,0,0 | Stroke Color 0,0,0

[UpdateHover]
Meter=Shape
Shape=Rectangle 0,0,21,20 | Fill Color 62,253,62,155 | StrokeWidth 0
x=1r
y=1r
Hidden=1

;-----------------------------------------------------------
;     Barra Superior - Botón Cerrar - Botón Actualizar
;-----------------------------------------------------------

[MeterSettingsText]
Meter=String
StringAlign=Center
FontFace=Segoe UI Light
FontColor=255,255,255
FontSize=15
X=360
Y=6
Text=">   C     O     N     F     I     G     U     R     A     C     I     Ó     N   <"
AntiAlias=1

[Close]
Meter=Image
ImageName=#@#\Images\Settings\close.png
x=680
y=1
LeftMouseDownAction=[!DeactivateConfig][!WriteKeyValue Variables settingsCenter 1 #@#\Settings\Settings.ini]
MouseOverAction=[!ShowMeter CloseHover]
MouseLeaveAction=[!HideMeter CloseHover]

[Update]
Meter=Image
ImageName=#@#\Images\Settings\update.png
x=650
y=1
LeftMouseDownAction=[!Refresh][!RainmeterRefreshApp]
MouseOverAction=[!ShowMeter UpdateHover]
MouseLeaveAction=[!HideMeter UpdateHover]

;-----------------------------------------------------------
;     Iconos Pag 1
;-----------------------------------------------------------

[IconPag1Luna]
Group=Pag1
Meter = Image
ImageName = #@#\Images\Luna\Luna\Luna0.png
ImageTint = #ColorLunaPla#
x=150
y=60
w=63
H=44
LeftMouseupAction = [!ToggleConfig "@AL\Planetas\Luna" "Luna.ini"][!UpdateMeter *][!Redraw]
;ToolTipType=1
;ToolTipText=Fan GPU
;Hidden=#HideGroup1#

;-----------------------------------------------------------
;     Cambio de Página
;-----------------------------------------------------------

[CambiodePaginaSig]
Meter = Image
ImageName = #@#\Images\Settings\Siguiente.png
ImageTint = #ColorBotPag#
x = 691
y = 453
LeftMouseUpAction=[!HideMeterGroup Pag1][!ShowMeterGroup Pag2][!ShowMeter "CambiodePaginaAnt"][!HideMeter "CambiodePaginaSig"][!SetVariable Pagina 2][!UpdateMeasureGroup Comp][!UpdateMeter *][!Redraw]
ToolTipType=1
ToolTipText=Siguiente
DynamicVariables=1

[CambiodePaginaAnt]
Meter = Image
ImageName = #@#\Images\Settings\Anterior.png
ImageTint = #ColorBotPag#
x = -7
y = 453
LeftMouseUpAction=[!HideMeterGroup Pag2][!ShowMeterGroup Pag1][!ShowMeter "CambiodePaginaSig"][!HideMeter "CambiodePaginaAnt"][!SetVariable Pagina 1][!UpdateMeasureGroup Comp][!UpdateMeter *][!Redraw]
ToolTipType=1
ToolTipText=Anterior
DynamicVariables=1
Hidden=1

;-----------------------------------------------------------
;     Rectangulos y Lineas Pag 2
;-----------------------------------------------------------

[MeterInputLinesBox]
Group=Pag2
Meter=Shape
X=117
Y=70
Shape=Rectangle 1,1,66,15 | Fill Color 0,0,0,0 | Stroke Color 0,0,0
Hidden=#HideGroup2#

[MeterLine]
Group=Pag2
Meter=Shape
X=0
Y=42
Shape=Rectangle 400,0,0,438 | Fill Color 0,0,0,0 | Stroke Color 0,0,0
Hidden=#HideGroup2#

[MeterLine2]
Group=Pag2
Meter=Shape
X=400
Y=145
Shape=Rectangle 0,0,320,0 | Fill Color 0,0,0,0 | Stroke Color 0,0,0
Hidden=#HideGroup2#

[MeterLine3]
Group=Pag2
Meter=Shape
X=400
Y=400
Shape=Rectangle 0,0,320,0 | Fill Color 0,0,0,0 | Stroke Color 0,0,0
Hidden=#HideGroup2#

[MeterLine4]
Group=Pag2
Meter=Shape
X=2
Y=400
Shape=Rectangle 0,0,397,0 | Fill Color 0,0,0,0 | Stroke Color 0,0,0
Hidden=#HideGroup2#

[MeterInputIPM]
Group=Pag2
Meter=Shape
X=117
Y=125
Shape=Rectangle 1,1,66,15 | Fill Color 0,0,0,0 | Stroke Color 0,0,0
Hidden=#HideGroup2#

[MeterInputIPT]
Group=Pag2
Meter=Shape
X=117
Y=145
Shape=Rectangle 1,1,66,15 | Fill Color 0,0,0,0 | Stroke Color 0,0,0
Hidden=#HideGroup2#

[MeterInputIP1]
Group=Pag2
Meter=Shape
X=117
Y=165
Shape=Rectangle 1,1,66,15 | Fill Color 0,0,0,0 | Stroke Color 0,0,0
Hidden=#HideGroup2#

[MeterInputSelect]
Group=Pag2
Meter=Shape
X=117
Y=185
Shape=Rectangle 1,1,66,15 | Fill Color 0,0,0,0 | Stroke Color 0,0,0
Hidden=#HideGroup2#

[MeterInputIP2]
Group=Pag2
Meter=Shape
X=117
Y=205
Shape=Rectangle 1,1,66,15 | Fill Color 0,0,0,0 | Stroke Color 0,0,0
Hidden=#HideGroup2#

[MeterInputIP2C]
Group=Pag2
Meter=Shape
X=117
Y=225
Shape=Rectangle 1,1,66,15 | Fill Color 0,0,0,0 | Stroke Color 0,0,0
Hidden=#HideGroup2#

[MeterInputIP3]
Group=Pag2
Meter=Shape
X=117
Y=245
Shape=Rectangle 1,1,66,15 | Fill Color 0,0,0,0 | Stroke Color 0,0,0
Hidden=#HideGroup2#

[MeterInputIP4]
Group=Pag2
Meter=Shape
X=117
Y=265
Shape=Rectangle 1,1,66,15 | Fill Color 0,0,0,0 | Stroke Color 0,0,0
Hidden=#HideGroup2#

[MeterInputIP5]
Group=Pag2
Meter=Shape
X=117
Y=285
Shape=Rectangle 1,1,66,15 | Fill Color 0,0,0,0 | Stroke Color 0,0,0
Hidden=#HideGroup2#

[MeterInputIP6]
Group=Pag2
Meter=Shape
X=117
Y=305
Shape=Rectangle 1,1,66,15 | Fill Color 0,0,0,0 | Stroke Color 0,0,0
Hidden=#HideGroup2#

[MeterInputIP7]
Group=Pag2
Meter=Shape
X=117
Y=325
Shape=Rectangle 1,1,66,15 | Fill Color 0,0,0,0 | Stroke Color 0,0,0
Hidden=#HideGroup2#

[MeterInputIP8]
Group=Pag2
Meter=Shape
X=117
Y=345
Shape=Rectangle 1,1,66,15 | Fill Color 0,0,0,0 | Stroke Color 0,0,0
Hidden=#HideGroup2#

[MeterInputIP9]
Group=Pag2
Meter=Shape
X=117
Y=365
Shape=Rectangle 1,1,66,15 | Fill Color 0,0,0,0 | Stroke Color 0,0,0
Hidden=#HideGroup2#

[MeterR1]
Group=Pag2
Meter=Shape
X=200
Y=70
Shape=Rectangle 1,1,66,15 | Fill Color 0,0,0,0 | Stroke Color 0,0,0
Hidden=#HideGroup2#

[MeterR2]
Group=Pag2
Meter=Shape
X=200
Y=90
Shape=Rectangle 1,1,66,15 | Fill Color 0,0,0,0 | Stroke Color 0,0,0
Hidden=#HideGroup2#

[MeterR3]
Group=Pag2
Meter=Shape
X=325
Y=70
Shape=Rectangle 1,1,66,15 | Fill Color 0,0,0,0 | Stroke Color 0,0,0
Hidden=#HideGroup2#

[MeterR4]
Group=Pag2
Meter=Shape
X=325
Y=90
Shape=Rectangle 1,1,66,15 | Fill Color 0,0,0,0 | Stroke Color 0,0,0
Hidden=#HideGroup2#

[MeterVMaxGpu]
Group=Pag2
Meter=Shape
X=200
Y=145
Shape=Rectangle 1,1,66,15 | Fill Color 0,0,0,0 | Stroke Color 0,0,0
Hidden=#HideGroup2#

[MeterV8Gpu]
Group=Pag2
Meter=Shape
X=200
Y=165
Shape=Rectangle 1,1,66,15 | Fill Color 0,0,0,0 | Stroke Color 0,0,0
Hidden=#HideGroup2#

[MeterV7Gpu]
Group=Pag2
Meter=Shape
X=200
Y=185
Shape=Rectangle 1,1,66,15 | Fill Color 0,0,0,0 | Stroke Color 0,0,0
Hidden=#HideGroup2#

[MeterV6Gpu]
Group=Pag2
Meter=Shape
X=200
Y=205
Shape=Rectangle 1,1,66,15 | Fill Color 0,0,0,0 | Stroke Color 0,0,0
Hidden=#HideGroup2#

[MeterV5Gpu]
Group=Pag2
Meter=Shape
X=200
Y=225
Shape=Rectangle 1,1,66,15 | Fill Color 0,0,0,0 | Stroke Color 0,0,0
Hidden=#HideGroup2#

[MeterV4Gpu]
Group=Pag2
Meter=Shape
X=200
Y=245
Shape=Rectangle 1,1,66,15 | Fill Color 0,0,0,0 | Stroke Color 0,0,0
Hidden=#HideGroup2#

[MeterV3Gpu]
Group=Pag2
Meter=Shape
X=200
Y=265
Shape=Rectangle 1,1,66,15 | Fill Color 0,0,0,0 | Stroke Color 0,0,0
Hidden=#HideGroup2#

[MeterV2Gpu]
Group=Pag2
Meter=Shape
X=200
Y=285
Shape=Rectangle 1,1,66,15 | Fill Color 0,0,0,0 | Stroke Color 0,0,0
Hidden=#HideGroup2#

[MeterV1Gpu]
Group=Pag2
Meter=Shape
X=200
Y=305
Shape=Rectangle 1,1,66,15 | Fill Color 0,0,0,0 | Stroke Color 0,0,0
Hidden=#HideGroup2#

[MeterVMinGpu]
Group=Pag2
Meter=Shape
X=200
Y=325
Shape=Rectangle 1,1,66,15 | Fill Color 0,0,0,0 | Stroke Color 0,0,0
Hidden=#HideGroup2#

[MeterDivGpu]
Group=Pag2
Meter=Shape
X=200
Y=345
Shape=Rectangle 1,1,66,15 | Fill Color 0,0,0,0 | Stroke Color 0,0,0
Hidden=#HideGroup2#

[MeterVMaxCPU]
Group=Pag2
Meter=Shape
X=325
Y=145
Shape=Rectangle 1,1,66,15 | Fill Color 0,0,0,0 | Stroke Color 0,0,0
Hidden=#HideGroup2#

[MeterV8CPU]
Group=Pag2
Meter=Shape
X=325
Y=165
Shape=Rectangle 1,1,66,15 | Fill Color 0,0,0,0 | Stroke Color 0,0,0
Hidden=#HideGroup2#

[MeterV7CPU]
Group=Pag2
Meter=Shape
X=325
Y=185
Shape=Rectangle 1,1,66,15 | Fill Color 0,0,0,0 | Stroke Color 0,0,0
Hidden=#HideGroup2#

[MeterV6CPU]
Group=Pag2
Meter=Shape
X=325
Y=205
Shape=Rectangle 1,1,66,15 | Fill Color 0,0,0,0 | Stroke Color 0,0,0
Hidden=#HideGroup2#

[MeterV5CPU]
Group=Pag2
Meter=Shape
X=325
Y=225
Shape=Rectangle 1,1,66,15 | Fill Color 0,0,0,0 | Stroke Color 0,0,0
Hidden=#HideGroup2#

[MeterV4CPU]
Group=Pag2
Meter=Shape
X=325
Y=245
Shape=Rectangle 1,1,66,15 | Fill Color 0,0,0,0 | Stroke Color 0,0,0
Hidden=#HideGroup2#

[MeterV3CPU]
Group=Pag2
Meter=Shape
X=325
Y=265
Shape=Rectangle 1,1,66,15 | Fill Color 0,0,0,0 | Stroke Color 0,0,0
Hidden=#HideGroup2#

[MeterV2CPU]
Group=Pag2
Meter=Shape
X=325
Y=285
Shape=Rectangle 1,1,66,15 | Fill Color 0,0,0,0 | Stroke Color 0,0,0
Hidden=#HideGroup2#

[MeterV1CPU]
Group=Pag2
Meter=Shape
X=325
Y=305
Shape=Rectangle 1,1,66,15 | Fill Color 0,0,0,0 | Stroke Color 0,0,0
Hidden=#HideGroup2#

[MeterVMinCPU]
Group=Pag2
Meter=Shape
X=325
Y=325
Shape=Rectangle 1,1,66,15 | Fill Color 0,0,0,0 | Stroke Color 0,0,0
Hidden=#HideGroup2#

[MeterDivCPU]
Group=Pag2
Meter=Shape
X=325
Y=345
Shape=Rectangle 1,1,66,15 | Fill Color 0,0,0,0 | Stroke Color 0,0,0
Hidden=#HideGroup2#

[MeterMaxGDDR]
Group=Pag2
Meter=Shape
X=325
Y=375
Shape=Rectangle 1,1,66,15 | Fill Color 0,0,0,0 | Stroke Color 0,0,0
Hidden=#HideGroup2#

[MeterInputFS1]
Group=Pag2
Meter=Shape
X=117
Y=420
Shape=Rectangle 1,1,66,15 | Fill Color 0,0,0,0 | Stroke Color 0,0,0
Hidden=#HideGroup2#

[MeterInputFS2]
Group=Pag2
Meter=Shape
X=117
Y=440
Shape=Rectangle 1,1,66,15 | Fill Color 0,0,0,0 | Stroke Color 0,0,0
Hidden=#HideGroup2#

[MeterInputFS3]
Group=Pag2
Meter=Shape
X=117
Y=460
Shape=Rectangle 1,1,66,15 | Fill Color 0,0,0,0 | Stroke Color 0,0,0
Hidden=#HideGroup2#

;-----------------------------------------------------------
;     Nombres,Categorias y Subtitulos Pag 2
;-----------------------------------------------------------

[MeterNombre1]
Group=Pag2
Meter=String
StringAlign=Center
FontFace=Segoe UI Light
FontColor=0,0,0
FontSize=10
X=90
Y=45
Text=>Mis Accesos<
AntiAlias=1
Hidden=#HideGroup2#

[MeterNombre2]
Group=Pag2
Meter=String
StringAlign=Left
FontFace=Segoe UI Light
FontColor=0,0,0
FontSize=10
X=10
Y=70
Text=Cant. Líneas >>> 
AntiAlias=1
Hidden=#HideGroup2#

[MeterNombre3]
Group=Pag2
Meter=String
StringAlign=Center
FontFace=Segoe UI Light
FontColor=0,0,0
FontSize=10
X=90
Y=98
Text=>Mis Direcciones IPs<
AntiAlias=1
Hidden=#HideGroup2#

[MeterNombre4]
Group=Pag2
Meter=String
StringAlign=Center
FontFace=Segoe UI Light
FontColor=0,0,0
FontSize=9
X=60
Y=124
Text=Tiempo Ping (Mseg)>
AntiAlias=1
Hidden=#HideGroup2#

[MeterNombre5]
Group=Pag2
Meter=String
StringAlign=Center
FontFace=Segoe UI Light
FontColor=0,0,0
FontSize=9
X=60
Y=144
Text=Transparencia>
AntiAlias=1
Hidden=#HideGroup2#

[MeterNombre6]
Group=Pag2
Meter=String
StringAlign=Center
FontFace=Segoe UI Light
FontColor=0,0,0
FontSize=9
X=60
Y=164
Text=AP Auxiliar>
AntiAlias=1
Hidden=#HideGroup2#

[MeterNombre7]
Group=Pag2
Meter=String
StringAlign=Center
FontFace=Segoe UI Light
FontColor=0,0,0
FontSize=9
X=60
Y=184
Text=Select (Ping o Int.)>
AntiAlias=1
Hidden=#HideGroup2#

[MeterNombre8]
Group=Pag2
Meter=String
StringAlign=Center
FontFace=Segoe UI Light
FontColor=0,0,0
FontSize=9
X=60
Y=204
Text=IP Internet>
AntiAlias=1
Hidden=#HideGroup2#

[MeterNombre9]
Group=Pag2
Meter=String
StringAlign=Center
FontFace=Segoe UI Light
FontColor=0,0,0
FontSize=9
X=60
Y=224
Text=Tiempo Ping (Mseg)>
AntiAlias=1
Hidden=#HideGroup2#

[MeterNombre10]
Group=Pag2
Meter=String
StringAlign=Center
FontFace=Segoe UI Light
FontColor=0,0,0
FontSize=9
X=60
Y=244
Text=Móvil Alex>
AntiAlias=1
Hidden=#HideGroup2#

[MeterNombre11]
Group=Pag2
Meter=String
StringAlign=Center
FontFace=Segoe UI Light
FontColor=0,0,0
FontSize=9
X=60
Y=264
Text=Móvil Lena>
AntiAlias=1
Hidden=#HideGroup2#

[MeterNombre12]
Group=Pag2
Meter=String
StringAlign=Center
FontFace=Segoe UI Light
FontColor=0,0,0
FontSize=9
X=60
Y=284
Text=Laptop WiFi>
AntiAlias=1
Hidden=#HideGroup2#

[MeterNombre13]
Group=Pag2
Meter=String
StringAlign=Center
FontFace=Segoe UI Light
FontColor=0,0,0
FontSize=9
X=60
Y=304
Text=Laptop LAN>
AntiAlias=1
Hidden=#HideGroup2#

[MeterNombre14]
Group=Pag2
Meter=String
StringAlign=Center
FontFace=Segoe UI Light
FontColor=0,0,0
FontSize=9
X=60
Y=324
Text=Equipo Invitado 1>
AntiAlias=1
Hidden=#HideGroup2#

[MeterNombre15]
Group=Pag2
Meter=String
StringAlign=Center
FontFace=Segoe UI Light
FontColor=0,0,0
FontSize=9
X=60
Y=344
Text=Equipo Invitado 2>
AntiAlias=1
Hidden=#HideGroup2#

[MeterNombre16]
Group=Pag2
Meter=String
StringAlign=Center
FontFace=Segoe UI Light
FontColor=0,0,0
FontSize=9
X=60
Y=364
Text=Equipo Invitado 3>
AntiAlias=1
Hidden=#HideGroup2#

[MeterNombre17]
Group=Pag2
Meter=String
StringAlign=Center
FontFace=Segoe UI Light
FontColor=0,0,0
FontSize=10
X=290
Y=45
Text=>Vínculos al Registro<
AntiAlias=1
Hidden=#HideGroup2#

[MeterNombre18]
Group=Pag2
Meter=String
StringAlign=Center
FontFace=Segoe UI Light
FontColor=0,0,0
FontSize=7
X=296
Y=71
Text=<V.F.M-U.T.D>
AntiAlias=1
Hidden=#HideGroup2#

[MeterNombre19]
Group=Pag2
Meter=String
StringAlign=Center
FontFace=Segoe UI Light
FontColor=0,0,0
FontSize=7
X=296
Y=91
Text=<T.D.S-N.T.U>
AntiAlias=1
Hidden=#HideGroup2#

[MeterNombre20]
Group=Pag2
Meter=String
StringAlign=Center
FontFace=Segoe UI Light
FontColor=0,0,0
FontSize=10
X=296
Y=110
Text=>Control Velocidades Fan<
AntiAlias=1
Hidden=#HideGroup2#

[MeterNombre21]
Group=Pag2
Meter=String
StringAlign=Center
FontFace=Segoe UI Light
FontColor=0,0,0
FontSize=10
X=233
Y=126
Text=>GPU<
AntiAlias=1
Hidden=#HideGroup2#

[MeterNombre22]
Group=Pag2
Meter=String
StringAlign=Center
FontFace=Segoe UI Light
FontColor=0,0,0
FontSize=10
X=360
Y=126
Text=>CPU<
AntiAlias=1
Hidden=#HideGroup2#

[MeterNombre23]
Group=Pag2
Meter=String
StringAlign=Center
FontFace=Segoe UI Light
FontColor=0,0,0
FontSize=8
X=295
Y=145
Text=< Vel Max >
AntiAlias=1
Hidden=#HideGroup2#

[MeterNombre24]
Group=Pag2
Meter=String
StringAlign=Center
FontFace=Segoe UI Light
FontColor=0,0,0
FontSize=8
X=295
Y=165
Text=< Vel #08 >
AntiAlias=1
Hidden=#HideGroup2#

[MeterNombre25]
Group=Pag2
Meter=String
StringAlign=Center
FontFace=Segoe UI Light
FontColor=0,0,0
FontSize=8
X=295
Y=185
Text=< Vel #07 >
AntiAlias=1
Hidden=#HideGroup2#

[MeterNombre26]
Group=Pag2
Meter=String
StringAlign=Center
FontFace=Segoe UI Light
FontColor=0,0,0
FontSize=8
X=295
Y=205
Text=< Vel #06 >
AntiAlias=1
Hidden=#HideGroup2#

[MeterNombre27]
Group=Pag2
Meter=String
StringAlign=Center
FontFace=Segoe UI Light
FontColor=0,0,0
FontSize=8
X=295
Y=225
Text=< Vel #05 >
AntiAlias=1
Hidden=#HideGroup2#

[MeterNombre28]
Group=Pag2
Meter=String
StringAlign=Center
FontFace=Segoe UI Light
FontColor=0,0,0
FontSize=8
X=295
Y=245
Text=< Vel #04 >
AntiAlias=1
Hidden=#HideGroup2#

[MeterNombre29]
Group=Pag2
Meter=String
StringAlign=Center
FontFace=Segoe UI Light
FontColor=0,0,0
FontSize=8
X=295
Y=265
Text=< Vel #03 >
AntiAlias=1
Hidden=#HideGroup2#

[MeterNombre30]
Group=Pag2
Meter=String
StringAlign=Center
FontFace=Segoe UI Light
FontColor=0,0,0
FontSize=8
X=295
Y=285
Text=< Vel #02 >
AntiAlias=1
Hidden=#HideGroup2#

[MeterNombre31]
Group=Pag2
Meter=String
StringAlign=Center
FontFace=Segoe UI Light
FontColor=0,0,0
FontSize=8
X=295
Y=305
Text=< Vel #01 >
AntiAlias=1
Hidden=#HideGroup2#

[MeterNombre32]
Group=Pag2
Meter=String
StringAlign=Center
FontFace=Segoe UI Light
FontColor=0,0,0
FontSize=8
X=295
Y=325
Text=< Vel Min >
AntiAlias=1
Hidden=#HideGroup2#

[MeterNombre33]
Group=Pag2
Meter=String
StringAlign=Center
FontFace=Segoe UI Light
FontColor=0,0,0
FontSize=8
X=295
Y=345
Text=< Divisor >
AntiAlias=1
Hidden=#HideGroup2#

[MeterNombre34]
Group=Pag2
Meter=String
StringAlign=Center
FontFace=Segoe UI Light
FontColor=0,0,0
FontSize=8
X=284
Y=375
Text=> Max GDDR <
AntiAlias=1
Hidden=#HideGroup2#

[MeterNombre35]
Group=Pag2
Meter=String
StringAlign=Center
FontFace=Segoe UI Light
FontColor=0,0,0
FontSize=9
X=98
Y=401
Text=>Vínculos al Registro<
AntiAlias=1
Hidden=#HideGroup2#

[MeterNombre36]
Group=Pag2
Meter=String
StringAlign=Center
FontFace=Segoe UI Light
FontColor=0,0,0
FontSize=9
X=60
Y=418
Text=Fan Sistema 1>
AntiAlias=1
Hidden=#HideGroup2#

[MeterNombre37]
Group=Pag2
Meter=String
StringAlign=Center
FontFace=Segoe UI Light
FontColor=0,0,0
FontSize=9
X=60
Y=438
Text=Fan Sistema 2>
AntiAlias=1
Hidden=#HideGroup2#

[MeterNombre38]
Group=Pag2
Meter=String
StringAlign=Center
FontFace=Segoe UI Light
FontColor=0,0,0
FontSize=9
X=60
Y=458
Text=Fan Sistema 3>
AntiAlias=1
Hidden=#HideGroup2#

[MeterNombre39]
Group=Pag2
Meter=String
StringAlign=Center
FontFace=Segoe UI Light
FontColor=0,0,0
FontSize=8
X=558
Y=148
Text=> Colores Gráficos <
AntiAlias=1
Hidden=#HideGroup2#

[MeterNombre40]
Group=Pag2
Meter=String
StringAlign=Center
FontFace=Segoe UI Light
FontColor=0,0,0
FontSize=8
X=470
Y=222
Text=^Venus^
AntiAlias=1
Hidden=#HideGroup2#

[MeterNombre41]
Group=Pag2
Meter=String
StringAlign=Center
FontFace=Segoe UI Light
FontColor=0,0,0
FontSize=8
X=536
Y=222
Text=^Tierra^
AntiAlias=1
Hidden=#HideGroup2#

[MeterNombre42]
Group=Pag2
Meter=String
StringAlign=Center
FontFace=Segoe UI Light
FontColor=0,0,0
FontSize=8
X=603
Y=222
Text=^Laber^
AntiAlias=1
Hidden=#HideGroup2#

[MeterNombre43]
Group=Pag2
Meter=String
StringAlign=Center
FontFace=Segoe UI Light
FontColor=0,0,0
FontSize=8
X=670
Y=222
Text=^Marte^
AntiAlias=1
Hidden=#HideGroup2#

[MeterNombre44]
Group=Pag2
Meter=String
StringAlign=Center
FontFace=Segoe UI Light
FontColor=0,0,0
FontSize=8
X=470
Y=259
Text=^Brillos^
AntiAlias=1
Hidden=#HideGroup2#

[MeterNombre45]
Group=Pag2
Meter=String
StringAlign=Center
FontFace=Segoe UI Light
FontColor=0,0,0
FontSize=8
X=558
Y=259
Text=^Luna^
AntiAlias=1
Hidden=#HideGroup2#

[MeterNombre46]
Group=Pag2
Meter=String
StringAlign=Center
FontFace=Segoe UI Light
FontColor=0,0,0
FontSize=8
X=626
Y=259
Text=^Sol^
AntiAlias=1
Hidden=#HideGroup2#

;-----------------------------------------------------------
;     Lineas de Texto por cada Variable Pag 2
;-----------------------------------------------------------

[MeterCodeLines]
Group=Pag2
Meter=String
StringAlign=Center
FontColor=0,0,0
FontFace=Segoe UI
FontSize=9
X=150
Y=70
Text=#LinesBox#
AntiAlias=1
ToolTipType=1
ToolTipText=Escribe La cantidad de Líneas y Presiona "Enter". Rango Recomendado: 1-30.
LeftMouseUpAction=[!PluginBang "MeterLines ExecuteBatch 1"]
Hidden=#HideGroup2#

[MeterCodeM]
Group=Pag2
Meter=String
StringAlign=Center
FontColor=0,0,0
FontFace=Segoe UI
FontSize=9
X=150
Y=125
Text=#MilisegPing#
AntiAlias=1
ToolTipType=1
ToolTipText=Escribe el tiempo correcto y presione "Enter". Rango Recomendado: 400-1000.
LeftMouseUpAction=[!PluginBang "MeterM ExecuteBatch 1"]
Hidden=#HideGroup2#

[MeterCodeT]
Group=Pag2
Meter=String
StringAlign=Center
FontColor=0,0,0
FontFace=Segoe UI
FontSize=9
X=150
Y=145
Text=#Transparent#
AntiAlias=1
ToolTipType=1
ToolTipText=Escribe un valor y Presiona "Enter". Rango Recomendado: 0-255.
LeftMouseUpAction=[!PluginBang "MeterT ExecuteBatch 1"]
Hidden=#HideGroup2#

[MeterCodeIP1]
Group=Pag2
Meter=String
StringAlign=Center
FontColor=0,0,0
FontFace=Segoe UI
FontSize=9
X=150
Y=165
Text=#Ping1#
AntiAlias=1
ToolTipType=1
ToolTipText=Escribe El IP y Presiona "Enter". Rango Recomendado: 10.0.20.1-5.
LeftMouseUpAction=[!PluginBang "MeterIP1 ExecuteBatch 1"]
Hidden=#HideGroup2#

[MeterCodeSelect]
Group=Pag2
Meter=String
StringAlign=Center
FontColor=0,0,0
FontFace=Segoe UI
FontSize=9
X=150
Y=185
Text=#Select#
AntiAlias=1
ToolTipType=1
ToolTipText=Escribe Internet o Ping y Presiona "Enter".
LeftMouseUpAction=[!PluginBang "MeterSelect ExecuteBatch 1"]
Hidden=#HideGroup2#

[MeterCodeIP2]
Group=Pag2
Meter=String
StringAlign=Center
FontColor=0,0,0
FontFace=Segoe UI
FontSize=9
X=150
Y=205
Text=#Ping2#
AntiAlias=1
ToolTipType=1
ToolTipText=Escribe El IP a comprobar en Internet y Presiona "Enter".
LeftMouseUpAction=[!PluginBang "MeterIP2 ExecuteBatch 1"]
Hidden=#HideGroup2#

[MeterCodeIP2C]
Group=Pag2
Meter=String
StringAlign=Center
FontColor=0,0,0
FontFace=Segoe UI
FontSize=9
X=150
Y=225
Text=#CompInter#
AntiAlias=1
ToolTipType=1
ToolTipText=Escribe el tiempo correcto y presione "Enter". Rango Recomendado: 300-1500.
LeftMouseUpAction=[!PluginBang "MeterIP2C ExecuteBatch 1"]
Hidden=#HideGroup2#

[MeterCodeIP3]
Group=Pag2
Meter=String
StringAlign=Center
FontColor=0,0,0
FontFace=Segoe UI
FontSize=9
X=150
Y=245
Text=#Ping3#
AntiAlias=1
ToolTipType=1
ToolTipText=Escribe El IP y Presiona "Enter". Rango Recomendado: 10.0.20.190-200.
LeftMouseUpAction=[!PluginBang "MeterIP3 ExecuteBatch 1"]
Hidden=#HideGroup2#

[MeterCodeIP4]
Group=Pag2
Meter=String
StringAlign=Center
FontColor=0,0,0
FontFace=Segoe UI
FontSize=9
X=150
Y=265
Text=#Ping4#
AntiAlias=1
ToolTipType=1
ToolTipText=Escribe El IP y Presiona "Enter". Rango Recomendado: 10.0.20.190-200.
LeftMouseUpAction=[!PluginBang "MeterIP4 ExecuteBatch 1"]
Hidden=#HideGroup2#

[MeterCodeIP5]
Group=Pag2
Meter=String
StringAlign=Center
FontColor=0,0,0
FontFace=Segoe UI
FontSize=9
X=150
Y=285
Text=#Ping5#
AntiAlias=1
ToolTipType=1
ToolTipText=Escribe El IP y Presiona "Enter". Rango Recomendado: 10.0.20.190-200.
LeftMouseUpAction=[!PluginBang "MeterIP5 ExecuteBatch 1"]
Hidden=#HideGroup2#

[MeterCodeIP6]
Group=Pag2
Meter=String
StringAlign=Center
FontColor=0,0,0
FontFace=Segoe UI
FontSize=9
X=150
Y=305
Text=#Ping6#
AntiAlias=1
ToolTipType=1
ToolTipText=Escribe El IP y Presiona "Enter". Rango Recomendado: 10.0.20.190-200.
LeftMouseUpAction=[!PluginBang "MeterIP6 ExecuteBatch 1"]
Hidden=#HideGroup2#

[MeterCodeIP7]
Group=Pag2
Meter=String
StringAlign=Center
FontColor=0,0,0
FontFace=Segoe UI
FontSize=9
X=150
Y=325
Text=#Ping7#
AntiAlias=1
ToolTipType=1
ToolTipText=Escribe El IP y Presiona "Enter". Rango Recomendado: 10.0.20.100-190.
LeftMouseUpAction=[!PluginBang "MeterIP7 ExecuteBatch 1"]
Hidden=#HideGroup2#

[MeterCodeIP8]
Group=Pag2
Meter=String
StringAlign=Center
FontColor=0,0,0
FontFace=Segoe UI
FontSize=9
X=150
Y=345
Text=#Ping8#
AntiAlias=1
ToolTipType=1
ToolTipText=Escribe El IP y Presiona "Enter". Rango Recomendado: 10.0.20.100-190.
LeftMouseUpAction=[!PluginBang "MeterIP8 ExecuteBatch 1"]
Hidden=#HideGroup2#

[MeterCodeIP9]
Group=Pag2
Meter=String
StringAlign=Center
FontColor=0,0,0
FontFace=Segoe UI
FontSize=9
X=150
Y=365
Text=#Ping9#
AntiAlias=1
ToolTipType=1
ToolTipText=Escribe El IP y Presiona "Enter". Rango Recomendado: 10.0.20.100-190.
LeftMouseUpAction=[!PluginBang "MeterIP9 ExecuteBatch 1"]
Hidden=#HideGroup2#

[MeterCodeR1]
Group=Pag2
Meter=String
StringAlign=Center
FontColor=0,0,0
FontFace=Segoe UI
FontSize=9
X=234
Y=70
Text=#RegFANS#
AntiAlias=1
ToolTipType=1
ToolTipText=Escribe El valor Raw y Presiona "Enter".
LeftMouseUpAction=[!PluginBang "MeterER1 ExecuteBatch 1"]
Hidden=#HideGroup2#

[MeterCodeR2]
Group=Pag2
Meter=String
StringAlign=Center
FontColor=0,0,0
FontFace=Segoe UI
FontSize=9
X=234
Y=90
Text=#RegHDDT#
AntiAlias=1
ToolTipType=1
ToolTipText=Escribe El valor Raw y Presiona "Enter".
LeftMouseUpAction=[!PluginBang "MeterER2 ExecuteBatch 1"]
Hidden=#HideGroup2#

[MeterCodeR3]
Group=Pag2
Meter=String
StringAlign=Center
FontColor=0,0,0
FontFace=Segoe UI
FontSize=9
X=359
Y=70
Text=#RegHDDU#
AntiAlias=1
ToolTipType=1
ToolTipText=Escribe El valor Raw y Presiona "Enter".
LeftMouseUpAction=[!PluginBang "MeterER3 ExecuteBatch 1"]
Hidden=#HideGroup2#

;[MeterCodeR4]
;Group=Pag2
;Meter=String
;StringAlign=Center
;FontColor=0,0,0
;FontFace=Segoe UI
;FontSize=9
;X=359
;Y=90
;Text=#RegHDDU#
;AntiAlias=1
;ToolTipType=1
;ToolTipText=Escribe El valor Raw y Presiona "Enter".
;LeftMouseUpAction=[!PluginBang "MeterER4 ExecuteBatch 1"]
;Hidden=#HideGroup2#

[MeterCodeVMaxG]
Group=Pag2
Meter=String
StringAlign=Center
FontColor=0,0,0
FontFace=Segoe UI
FontSize=9
X=234
Y=145
Text=#VMaxG#
AntiAlias=1
ToolTipType=1
ToolTipText=Escribe El valor Máximo y Presiona "Enter".
LeftMouseUpAction=[!PluginBang "MeterVMaxG ExecuteBatch 1"]
Hidden=#HideGroup2#

[MeterCodeVelG8]
Group=Pag2
Meter=String
StringAlign=Center
FontColor=0,0,0
FontFace=Segoe UI
FontSize=9
X=234
Y=165
Text=#VelG8#
AntiAlias=1
ToolTipType=1
ToolTipText=Escribe El valor Para la 8va Velocidad y Presiona "Enter".
LeftMouseUpAction=[!PluginBang "MeterVelG8 ExecuteBatch 1"]
Hidden=#HideGroup2#

[MeterCodeVelG7]
Group=Pag2
Meter=String
StringAlign=Center
FontColor=0,0,0
FontFace=Segoe UI
FontSize=9
X=234
Y=185
Text=#VelG7#
AntiAlias=1
ToolTipType=1
ToolTipText=Escribe El valor Para la 7ma Velocidad y Presiona "Enter".
LeftMouseUpAction=[!PluginBang "MeterVelG7 ExecuteBatch 1"]
Hidden=#HideGroup2#

[MeterCodeVelG6]
Group=Pag2
Meter=String
StringAlign=Center
FontColor=0,0,0
FontFace=Segoe UI
FontSize=9
X=234
Y=205
Text=#VelG6#
AntiAlias=1
ToolTipType=1
ToolTipText=Escribe El valor Para la 6ta Velocidad y Presiona "Enter".
LeftMouseUpAction=[!PluginBang "MeterVelG6 ExecuteBatch 1"]
Hidden=#HideGroup2#

[MeterCodeVelG5]
Group=Pag2
Meter=String
StringAlign=Center
FontColor=0,0,0
FontFace=Segoe UI
FontSize=9
X=234
Y=225
Text=#VelG5#
AntiAlias=1
ToolTipType=1
ToolTipText=Escribe El valor Para la 5ta Velocidad y Presiona "Enter".
LeftMouseUpAction=[!PluginBang "MeterVelG5 ExecuteBatch 1"]
Hidden=#HideGroup2#

[MeterCodeVelG4]
Group=Pag2
Meter=String
StringAlign=Center
FontColor=0,0,0
FontFace=Segoe UI
FontSize=9
X=234
Y=245
Text=#VelG4#
AntiAlias=1
ToolTipType=1
ToolTipText=Escribe El valor Para la 4ta Velocidad y Presiona "Enter".
LeftMouseUpAction=[!PluginBang "MeterVelG4 ExecuteBatch 1"]
Hidden=#HideGroup2#

[MeterCodeVelG3]
Group=Pag2
Meter=String
StringAlign=Center
FontColor=0,0,0
FontFace=Segoe UI
FontSize=9
X=234
Y=265
Text=#VelG3#
AntiAlias=1
ToolTipType=1
ToolTipText=Escribe El valor Para la 3ra Velocidad y Presiona "Enter".
LeftMouseUpAction=[!PluginBang "MeterVelG3 ExecuteBatch 1"]
Hidden=#HideGroup2#

[MeterCodeVelG2]
Group=Pag2
Meter=String
StringAlign=Center
FontColor=0,0,0
FontFace=Segoe UI
FontSize=9
X=234
Y=285
Text=#VelG2#
AntiAlias=1
ToolTipType=1
ToolTipText=Escribe El valor Para la 2da Velocidad y Presiona "Enter".
LeftMouseUpAction=[!PluginBang "MeterVelG2 ExecuteBatch 1"]
Hidden=#HideGroup2#

[MeterCodeVelG1]
Group=Pag2
Meter=String
StringAlign=Center
FontColor=0,0,0
FontFace=Segoe UI
FontSize=9
X=234
Y=305
Text=#VelG1#
AntiAlias=1
ToolTipType=1
ToolTipText=Escribe El valor Para la 1ra Velocidad y Presiona "Enter".
LeftMouseUpAction=[!PluginBang "MeterVelG1 ExecuteBatch 1"]
Hidden=#HideGroup2#

[MeterCodeVMinG]
Group=Pag2
Meter=String
StringAlign=Center
FontColor=0,0,0
FontFace=Segoe UI
FontSize=9
X=234
Y=325
Text=#VMinG#
AntiAlias=1
ToolTipType=1
ToolTipText=Escribe El valor Mínimo de Velocidad y Presiona "Enter".
LeftMouseUpAction=[!PluginBang "MeterVMinG ExecuteBatch 1"]
Hidden=#HideGroup2#

[MeterCodeDivGPU]
Group=Pag2
Meter=String
StringAlign=Center
FontColor=0,0,0
FontFace=Segoe UI
FontSize=9
X=234
Y=345
Text=#DivGPU#
AntiAlias=1
ToolTipType=1
ToolTipText=Escribe El valor Para el Divisor de Velocidad y Presiona "Enter".
LeftMouseUpAction=[!PluginBang "MeterWDivGPU ExecuteBatch 1"]
Hidden=#HideGroup2#

[MeterCodeVMaxC]
Group=Pag2
Meter=String
StringAlign=Center
FontColor=0,0,0
FontFace=Segoe UI
FontSize=9
X=359
Y=145
Text=#VMaxC#
AntiAlias=1
ToolTipType=1
ToolTipText=Escribe El valor Máximo de Velocidad y Presiona "Enter".
LeftMouseUpAction=[!PluginBang "MeterVMaxC ExecuteBatch 1"]
Hidden=#HideGroup2#

[MeterCodeVelC8]
Group=Pag2
Meter=String
StringAlign=Center
FontColor=0,0,0
FontFace=Segoe UI
FontSize=9
X=359
Y=165
Text=#VelC8#
AntiAlias=1
ToolTipType=1
ToolTipText=Escribe El valor Para la 8va Velocidad y Presiona "Enter".
LeftMouseUpAction=[!PluginBang "MeterVelC8 ExecuteBatch 1"]
Hidden=#HideGroup2#

[MeterCodeVelC7]
Group=Pag2
Meter=String
StringAlign=Center
FontColor=0,0,0
FontFace=Segoe UI
FontSize=9
X=359
Y=185
Text=#VelC7#
AntiAlias=1
ToolTipType=1
ToolTipText=Escribe El valor Para la 7ma Velocidad y Presiona "Enter".
LeftMouseUpAction=[!PluginBang "MeterVelC7 ExecuteBatch 1"]
Hidden=#HideGroup2#

[MeterCodeVelC6]
Group=Pag2
Meter=String
StringAlign=Center
FontColor=0,0,0
FontFace=Segoe UI
FontSize=9
X=359
Y=205
Text=#VelC6#
AntiAlias=1
ToolTipType=1
ToolTipText=Escribe El valor Para la 6ta Velocidad y Presiona "Enter".
LeftMouseUpAction=[!PluginBang "MeterVelC6 ExecuteBatch 1"]
Hidden=#HideGroup2#

[MeterCodeVelC5]
Group=Pag2
Meter=String
StringAlign=Center
FontColor=0,0,0
FontFace=Segoe UI
FontSize=9
X=359
Y=225
Text=#VelC5#
AntiAlias=1
ToolTipType=1
ToolTipText=Escribe El valor Para la 5ta Velocidad y Presiona "Enter".
LeftMouseUpAction=[!PluginBang "MeterVelC5 ExecuteBatch 1"]
Hidden=#HideGroup2#

[MeterCodeVelC4]
Group=Pag2
Meter=String
StringAlign=Center
FontColor=0,0,0
FontFace=Segoe UI
FontSize=9
X=359
Y=245
Text=#VelC4#
AntiAlias=1
ToolTipType=1
ToolTipText=Escribe El valor Para la 4ta Velocidad y Presiona "Enter".
LeftMouseUpAction=[!PluginBang "MeterVelC4 ExecuteBatch 1"]
Hidden=#HideGroup2#

[MeterCodeVelC3]
Group=Pag2
Meter=String
StringAlign=Center
FontColor=0,0,0
FontFace=Segoe UI
FontSize=9
X=359
Y=265
Text=#VelC3#
AntiAlias=1
ToolTipType=1
ToolTipText=Escribe El valor Para la 3ra Velocidad y Presiona "Enter".
LeftMouseUpAction=[!PluginBang "MeterVelC3 ExecuteBatch 1"]
Hidden=#HideGroup2#

[MeterCodeVelC2]
Group=Pag2
Meter=String
StringAlign=Center
FontColor=0,0,0
FontFace=Segoe UI
FontSize=9
X=359
Y=285
Text=#VelC2#
AntiAlias=1
ToolTipType=1
ToolTipText=Escribe El valor Para la 2da Velocidad y Presiona "Enter".
LeftMouseUpAction=[!PluginBang "MeterVelC2 ExecuteBatch 1"]
Hidden=#HideGroup2#

[MeterCodeVelC1]
Group=Pag2
Meter=String
StringAlign=Center
FontColor=0,0,0
FontFace=Segoe UI
FontSize=9
X=359
Y=305
Text=#VelC1#
AntiAlias=1
ToolTipType=1
ToolTipText=Escribe El valor Para la 1ra Velocidad y Presiona "Enter".
LeftMouseUpAction=[!PluginBang "MeterVelC1 ExecuteBatch 1"]
Hidden=#HideGroup2#

[MeterCodeVMinC]
Group=Pag2
Meter=String
StringAlign=Center
FontColor=0,0,0
FontFace=Segoe UI
FontSize=9
X=359
Y=325
Text=#VMinC#
AntiAlias=1
ToolTipType=1
ToolTipText=Escribe El valor Mínimo de Velocidad y Presiona "Enter".
LeftMouseUpAction=[!PluginBang "MeterVMinC ExecuteBatch 1"]
Hidden=#HideGroup2#

[MeterCodeDivCPU]
Group=Pag2
Meter=String
StringAlign=Center
FontColor=0,0,0
FontFace=Segoe UI
FontSize=9
X=359
Y=345
Text=#DivCPU#
AntiAlias=1
ToolTipType=1
ToolTipText=Escribe El valor Para el Divisor de Velocidad y Presiona "Enter".
LeftMouseUpAction=[!PluginBang "MeterWDivCPU ExecuteBatch 1"]
Hidden=#HideGroup2#

[MeterCodeMaxGDDR]
Group=Pag2
Meter=String
StringAlign=Center
FontColor=0,0,0
FontFace=Segoe UI
FontSize=9
X=359
Y=375
Text=#MaxGPU-RAM#
AntiAlias=1
ToolTipType=1
ToolTipText=Escribe El valor Para el Divisor de Velocidad y Presiona "Enter".
LeftMouseUpAction=[!PluginBang "MeterWMaxGDDR ExecuteBatch 1"]
Hidden=#HideGroup2#

[MeterCodeFS1]
Group=Pag2
Meter=String
StringAlign=Center
FontColor=0,0,0
FontFace=Segoe UI
FontSize=9
X=150
Y=420
Text=#FanSis1#
AntiAlias=1
ToolTipType=1
ToolTipText=Escribe El valor Raw y Presiona "Enter".
LeftMouseUpAction=[!PluginBang "MeterFS1 ExecuteBatch 1"]
Hidden=#HideGroup2#

[MeterCodeFS2]
Group=Pag2
Meter=String
StringAlign=Center
FontColor=0,0,0
FontFace=Segoe UI
FontSize=9
X=150
Y=440
Text=#FanSis2#
AntiAlias=1
ToolTipType=1
ToolTipText=Escribe El valor Raw y Presiona "Enter".
LeftMouseUpAction=[!PluginBang "MeterFS2 ExecuteBatch 1"]
Hidden=#HideGroup2#

[MeterCodeFS3]
Group=Pag2
Meter=String
StringAlign=Center
FontColor=0,0,0
FontFace=Segoe UI
FontSize=9
X=150
Y=460
Text=#FanSis3#
AntiAlias=1
ToolTipType=1
ToolTipText=Escribe El valor Raw y Presiona "Enter".
LeftMouseUpAction=[!PluginBang "MeterFS3 ExecuteBatch 1"]
Hidden=#HideGroup2#

;-----------------------------------------------------------
;     Grabar cada Variable Pag 2
;-----------------------------------------------------------

[MeterLines]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=9
X=119
Y=71
W=64
H=14
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables LinesBox "$UserInput$""#@#\Config\Variables.inc"][!RainmeterRefreshApp] 
DefaultValue="Líneas"

[MeterM]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=9
X=119
Y=126
W=64
H=14
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables MilisegPing "$UserInput$""#@#\Config\Variables.inc"][!RainmeterRefreshApp] 
DefaultValue="Miliseg"

[MeterT]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=9
X=119
Y=146
W=64
H=14
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables Transparent "$UserInput$""#@#\Config\Variables.inc"][!RainmeterRefreshApp] 
DefaultValue="Transp."

[MeterIP1]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=9
X=119
Y=166
W=64
H=14
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables Ping1 "$UserInput$""#@#\Config\Variables.inc"][!RainmeterRefreshApp] 
DefaultValue="IP-1"

[MeterSelect]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=9
X=119
Y=186
W=64
H=14
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables Select "$UserInput$""#@#\Config\Variables.inc"][!RainmeterRefreshApp] 
DefaultValue="Select."

[MeterIP2]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=9
X=119
Y=206
W=64
H=14
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables Ping2 "$UserInput$""#@#\Config\Variables.inc"][!RainmeterRefreshApp] 
DefaultValue="IP-2"

[MeterIP2C]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=9
X=119
Y=226
W=64
H=14
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables CompInter "$UserInput$""#@#\Config\Variables.inc"][!RainmeterRefreshApp] 
DefaultValue="Miliseg"

[MeterIP3]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=9
X=119
Y=246
W=64
H=14
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables Ping3 "$UserInput$""#@#\Config\Variables.inc"][!RainmeterRefreshApp] 
DefaultValue="IP-3"

[MeterIP4]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=9
X=119
Y=266
W=64
H=14
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables Ping4 "$UserInput$""#@#\Config\Variables.inc"][!RainmeterRefreshApp] 
DefaultValue="IP-4"

[MeterIP5]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=9
X=119
Y=286
W=64
H=14
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables Ping5 "$UserInput$""#@#\Config\Variables.inc"][!RainmeterRefreshApp] 
DefaultValue="IP-5"

[MeterIP6]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=9
X=119
Y=306
W=64
H=14
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables Ping6 "$UserInput$""#@#\Config\Variables.inc"][!RainmeterRefreshApp] 
DefaultValue="IP-6"

[MeterIP7]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=9
X=119
Y=326
W=64
H=14
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables Ping7 "$UserInput$""#@#\Config\Variables.inc"][!RainmeterRefreshApp] 
DefaultValue="IP-7"

[MeterIP8]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=9
X=119
Y=346
W=64
H=14
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables Ping8 "$UserInput$""#@#\Config\Variables.inc"][!RainmeterRefreshApp] 
DefaultValue="IP-8"

[MeterIP9]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=9
X=119
Y=366
W=64
H=14
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables Ping9 "$UserInput$""#@#\Config\Variables.inc"][!RainmeterRefreshApp] 
DefaultValue="IP-9"

[MeterER1]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=9
X=202
Y=71
W=64
H=14
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables RegFANS "$UserInput$""#@#\Config\Variables.inc"][!RainmeterRefreshApp] 
DefaultValue="V.Raw1"

[MeterER2]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=9
X=202
Y=91
W=64
H=14
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables RegHDDT "$UserInput$""#@#\Config\Variables.inc"][!RainmeterRefreshApp] 
DefaultValue="V.Raw2"

[MeterER3]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=9
X=327
Y=71
W=64
H=14
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables RegHDDU "$UserInput$""#@#\Config\Variables.inc"][!RainmeterRefreshApp] 
DefaultValue="V.Raw3"

[MeterER4]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=9
X=327
Y=91
W=64
H=14
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables ------- "$UserInput$""#@#\Config\Variables.inc"][!RainmeterRefreshApp] 
DefaultValue="V.Raw4"

[MeterVMaxG]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=9
X=202
Y=146
W=64
H=14
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables VMaxG "$UserInput$""#@#\Config\Variables.inc"][!RainmeterRefreshApp] 
DefaultValue="VMaxG"

[MeterVelG8]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=9
X=202
Y=166
W=64
H=14
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables VelG8 "$UserInput$""#@#\Config\Variables.inc"][!RainmeterRefreshApp] 
DefaultValue="VelG8"

[MeterVelG7]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=9
X=202
Y=186
W=64
H=14
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables VelG7 "$UserInput$""#@#\Config\Variables.inc"][!RainmeterRefreshApp] 
DefaultValue="VelG7"

[MeterVelG6]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=9
X=202
Y=206
W=64
H=14
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables VelG6 "$UserInput$""#@#\Config\Variables.inc"][!RainmeterRefreshApp] 
DefaultValue="VelG6"

[MeterVelG5]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=9
X=202
Y=226
W=64
H=14
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables VelG5 "$UserInput$""#@#\Config\Variables.inc"][!RainmeterRefreshApp] 
DefaultValue="VelG5"

[MeterVelG4]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=9
X=202
Y=246
W=64
H=14
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables VelG4 "$UserInput$""#@#\Config\Variables.inc"][!RainmeterRefreshApp] 
DefaultValue="VelG4"

[MeterVelG3]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=9
X=202
Y=266
W=64
H=14
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables VelG3 "$UserInput$""#@#\Config\Variables.inc"][!RainmeterRefreshApp] 
DefaultValue="VelG3"

[MeterVelG2]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=9
X=202
Y=286
W=64
H=14
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables VelG2 "$UserInput$""#@#\Config\Variables.inc"][!RainmeterRefreshApp] 
DefaultValue="VelG2"

[MeterVelG1]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=9
X=202
Y=306
W=64
H=14
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables VelG1 "$UserInput$""#@#\Config\Variables.inc"][!RainmeterRefreshApp] 
DefaultValue="VelG1"

[MeterVMinG]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=9
X=202
Y=326
W=64
H=14
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables VMinG "$UserInput$""#@#\Config\Variables.inc"][!RainmeterRefreshApp] 
DefaultValue="VMinG"

[MeterWDivGPU]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=9
X=202
Y=346
W=64
H=14
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables DivGPU "$UserInput$""#@#\Config\Variables.inc"][!RainmeterRefreshApp] 
DefaultValue="DivGPU"

[MeterVMaxC]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=9
X=327
Y=146
W=64
H=14
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables VMaxC "$UserInput$""#@#\Config\Variables.inc"][!RainmeterRefreshApp] 
DefaultValue="VMaxC"

[MeterVelC8]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=9
X=327
Y=166
W=64
H=14
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables VelC8 "$UserInput$""#@#\Config\Variables.inc"][!RainmeterRefreshApp] 
DefaultValue="VelC8"

[MeterVelC7]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=9
X=327
Y=186
W=64
H=14
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables VelC7 "$UserInput$""#@#\Config\Variables.inc"][!RainmeterRefreshApp] 
DefaultValue="VelC7"

[MeterVelC6]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=9
X=327
Y=206
W=64
H=14
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables VelC6 "$UserInput$""#@#\Config\Variables.inc"][!RainmeterRefreshApp] 
DefaultValue="VelC6"

[MeterVelC5]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=9
X=327
Y=226
W=64
H=14
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables VelC5 "$UserInput$""#@#\Config\Variables.inc"][!RainmeterRefreshApp] 
DefaultValue="VelC5"

[MeterVelC4]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=9
X=327
Y=246
W=64
H=14
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables VelC4 "$UserInput$""#@#\Config\Variables.inc"][!RainmeterRefreshApp] 
DefaultValue="VelC4"

[MeterVelC3]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=9
X=327
Y=266
W=64
H=14
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables VelC3 "$UserInput$""#@#\Config\Variables.inc"][!RainmeterRefreshApp] 
DefaultValue="VelC3"

[MeterVelC2]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=9
X=327
Y=286
W=64
H=14
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables VelC2 "$UserInput$""#@#\Config\Variables.inc"][!RainmeterRefreshApp] 
DefaultValue="VelC2"

[MeterVelC1]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=9
X=327
Y=306
W=64
H=14
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables VelC1 "$UserInput$""#@#\Config\Variables.inc"][!RainmeterRefreshApp] 
DefaultValue="VelC1"

[MeterVMinC]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=9
X=327
Y=326
W=64
H=14
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables VMinC "$UserInput$""#@#\Config\Variables.inc"][!RainmeterRefreshApp] 
DefaultValue="VMinC"

[MeterWDivCPU]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=9
X=327
Y=346
W=64
H=14
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables DivCPU "$UserInput$""#@#\Config\Variables.inc"][!RainmeterRefreshApp] 
DefaultValue="DivCPU"

[MeterWMaxGDDR]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=9
X=327
Y=376
W=64
H=14
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables MaxGPU-RAM "$UserInput$""#@#\Config\Variables.inc"][!RainmeterRefreshApp] 
DefaultValue="MaxGDDR"

[MeterFS1]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=9
X=119
Y=421
W=64
H=14
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables FanSis1 "$UserInput$""#@#\Config\Variables.inc"][!RainmeterRefreshApp] 
DefaultValue="FS-1"

[MeterFS2]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=9
X=119
Y=441
W=64
H=14
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables FanSis2 "$UserInput$""#@#\Config\Variables.inc"][!RainmeterRefreshApp] 
DefaultValue="FS-2"

[MeterFS3]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=9
X=119
Y=461
W=64
H=14
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables FanSis3 "$UserInput$""#@#\Config\Variables.inc"][!RainmeterRefreshApp] 
DefaultValue="FS-3"

;-----------------------------------------------------------
;     Iconos y Variables de Colores Pag 2
;-----------------------------------------------------------

[ColorFGPU]
Group=Pag2
Meter = Image
ImageName = #@#\Images\Fan\FanBladeS_invert.png
ImageTint = #ColorFGPU#
x = 440
y = 48
LeftMouseDownAction = [!ShowMeter WarningInput][!HideMeter ResetColor][!SetOption TypeboxColor ImageTint #ColorFGPU#][!SetOption InputColor DefaultValue #ColorFGPU#][!SetOption InputColor Command1 "[!WriteKeyValue Variables ColorFGPU $UserInput$ #@#\Config\Styles.inc]"][!ShowMeter TypeboxColor][!PluginBang "MeterInputFGPU ExecuteBatch 1"]
ToolTipType=1
ToolTipText=Fan GPU
Hidden=#HideGroup2#

[ColorFCPU]
Group=Pag2
Meter = Image
ImageName = #@#\Images\Fan\FanBladeS.png
ImageTint = #ColorFCPU#
x = 150r
y = 48
LeftMouseDownAction = [!ShowMeter WarningInput][!HideMeter ResetColor][!SetOption TypeboxColor ImageTint #ColorFCPU#][!SetOption InputColor DefaultValue #ColorFCPU#][!SetOption InputColor Command1 "[!WriteKeyValue Variables ColorFCPU $UserInput$ #@#\Config\Styles.inc]"][!ShowMeter TypeboxColor][!PluginBang "MeterInputFCPU ExecuteBatch 1"]
ToolTipType=1
ToolTipText=Fan CPU
Hidden=#HideGroup2#

[ColorBG]
Group=Pag2
Meter = Image
ImageName = #@#\Images\Settings\Button.png
ImageTint = #BackgColor#
x = 440
y = 170
LeftMouseDownAction = [!ShowMeter WarningInput][!HideMeter ResetColor][!SetOption TypeboxColor ImageTint #BackgColor#][!SetOption InputColor DefaultValue #BackgColor#][!SetOption InputColor Command1 "[!WriteKeyValue Variables BackgColor $UserInput$ #@#\Config\Styles.inc]"][!ShowMeter TypeboxColor][!PluginBang "MeterInputBG ExecuteBatch 1"]
ToolTipType=1
ToolTipText=Fondo
Hidden=#HideGroup2#

[ColorG1]
Group=Pag2
Meter = Image
ImageName = #@#\Images\Settings\Button.png
ImageTint = #ColorLine1#
x = 485
y = 170
LeftMouseDownAction = [!ShowMeter WarningInput][!HideMeter ResetColor][!SetOption TypeboxColor ImageTint #ColorLine1#][!SetOption InputColor DefaultValue #ColorLine1#][!SetOption InputColor Command1 "[!WriteKeyValue Variables ColorLine1 $UserInput$ #@#\Config\Styles.inc]"][!ShowMeter TypeboxColor][!PluginBang "MeterInputG1 ExecuteBatch 1"]
ToolTipType=1
ToolTipText=Línea Standar
Hidden=#HideGroup2#

[ColorG2]
Group=Pag2
Meter = Image
ImageName = #@#\Images\Settings\Button.png
ImageTint = #ColorLine2#
x = 530
y = 170
LeftMouseDownAction = [!ShowMeter WarningInput][!HideMeter ResetColor][!SetOption TypeboxColor ImageTint #ColorLine2#][!SetOption InputColor DefaultValue #ColorLine2#][!SetOption InputColor Command1 "[!WriteKeyValue Variables ColorLine2 $UserInput$ #@#\Config\Styles.inc]"][!ShowMeter TypeboxColor][!PluginBang "MeterInputG2 ExecuteBatch 1"]
ToolTipType=1
ToolTipText=Línea Secundaria
Hidden=#HideGroup2#

[ColorG3]
Group=Pag2
Meter = Image
ImageName = #@#\Images\Settings\Button.png
ImageTint = #ColorLine3#
x = 575
y = 170
LeftMouseDownAction = [!ShowMeter WarningInput][!HideMeter ResetColor][!SetOption TypeboxColor ImageTint #ColorLine3#][!SetOption InputColor DefaultValue #ColorLine3#][!SetOption InputColor Command1 "[!WriteKeyValue Variables ColorLine3 $UserInput$ #@#\Config\Styles.inc]"][!ShowMeter TypeboxColor][!PluginBang "MeterInputG3 ExecuteBatch 1"]
ToolTipType=1
ToolTipText=Fan 1 Sys.
Hidden=#HideGroup2#

[ColorG4]
Group=Pag2
Meter = Image
ImageName = #@#\Images\Settings\Button.png
ImageTint = #ColorLine4#
x = 620
y = 170
LeftMouseDownAction = [!ShowMeter WarningInput][!HideMeter ResetColor][!SetOption TypeboxColor ImageTint #ColorLine4#][!SetOption InputColor DefaultValue #ColorLine4#][!SetOption InputColor Command1 "[!WriteKeyValue Variables ColorLine4 $UserInput$ #@#\Config\Styles.inc]"][!ShowMeter TypeboxColor][!PluginBang "MeterInputG4 ExecuteBatch 1"]
ToolTipType=1
ToolTipText=Fan 2 Sys.
Hidden=#HideGroup2#

[ColorG5]
Group=Pag2
Meter = Image
ImageName = #@#\Images\Settings\Button.png
ImageTint = #ColorLine5#
x = 665
y = 170
LeftMouseDownAction = [!ShowMeter WarningInput][!HideMeter ResetColor][!SetOption TypeboxColor ImageTint #ColorLine5#][!SetOption InputColor DefaultValue #ColorLine5#][!SetOption InputColor Command1 "[!WriteKeyValue Variables ColorLine5 $UserInput$ #@#\Config\Styles.inc]"][!ShowMeter TypeboxColor][!PluginBang "MeterInputG5 ExecuteBatch 1"]
ToolTipType=1
ToolTipText=Fan 3 Sys.
Hidden=#HideGroup2#

[ColorVenusAtmB]
Group=Pag2
Meter = Image
ImageName = #@#\Images\Settings\Button.png
ImageTint = #ColorVenusAtm#
x = 440
y = 208
LeftMouseDownAction = [!ShowMeter WarningInput][!HideMeter ResetColor][!SetOption TypeboxColor ImageTint #ColorVenusAtm#][!SetOption InputColor DefaultValue #ColorVenusAtm#][!SetOption InputColor Command1 "[!WriteKeyValue Variables ColorVenusAtm $UserInput$ #@#\Config\Styles.inc]"][!ShowMeter TypeboxColor][!PluginBang "MeterInputVenusAtm ExecuteBatch 1"]
ToolTipType=1
ToolTipText=Atmófera
Hidden=#HideGroup2#

[ColorVenusPlaB]
Group=Pag2
Meter = Image
ImageName = #@#\Images\Settings\Button.png
ImageTint = #ColorVenusPla#
x = 485
y = 208
LeftMouseDownAction = [!ShowMeter WarningInput][!HideMeter ResetColor][!SetOption TypeboxColor ImageTint #ColorVenusPla#][!SetOption InputColor DefaultValue #ColorVenusPla#][!SetOption InputColor Command1 "[!WriteKeyValue Variables ColorVenusPla $UserInput$ #@#\Config\Styles.inc]"][!ShowMeter TypeboxColor][!PluginBang "MeterInputVenusPla ExecuteBatch 1"]
ToolTipType=1
ToolTipText=Cuerpo
Hidden=#HideGroup2#

[ColorTierraAtmB]
Group=Pag2
Meter = Image
ImageName = #@#\Images\Settings\Button.png
ImageTint = #ColorTierraAtm#
x = 530
y = 208
LeftMouseDownAction = [!ShowMeter WarningInput][!HideMeter ResetColor][!SetOption TypeboxColor ImageTint #ColorTierraAtm#][!SetOption InputColor DefaultValue #ColorTierraAtm#][!SetOption InputColor Command1 "[!WriteKeyValue Variables ColorTierraAtm $UserInput$ #@#\Config\Styles.inc]"][!ShowMeter TypeboxColor][!PluginBang "MeterInputTierraAtm ExecuteBatch 1"]
ToolTipType=1
ToolTipText=Atmófera
Hidden=#HideGroup2#

[ColorLaberAtmB]
Group=Pag2
Meter = Image
ImageName = #@#\Images\Settings\Button.png
ImageTint = #ColorLaberAtm#
x = 575
y = 208
LeftMouseDownAction = [!ShowMeter WarningInput][!HideMeter ResetColor][!SetOption TypeboxColor ImageTint #ColorLaberAtm#][!SetOption InputColor DefaultValue #ColorLaberAtm#][!SetOption InputColor Command1 "[!WriteKeyValue Variables ColorLaberAtm $UserInput$ #@#\Config\Styles.inc]"][!ShowMeter TypeboxColor][!PluginBang "MeterInputLaberAtm ExecuteBatch 1"]
ToolTipType=1
ToolTipText=Atmófera
Hidden=#HideGroup2#

[ColorLaberPlaB]
Group=Pag2
Meter = Image
ImageName = #@#\Images\Settings\Button.png
ImageTint = #ColorLaberPla#
x = 620
y = 208
LeftMouseDownAction = [!ShowMeter WarningInput][!HideMeter ResetColor][!SetOption TypeboxColor ImageTint #ColorLaberPla#][!SetOption InputColor DefaultValue #ColorLaberPla#][!SetOption InputColor Command1 "[!WriteKeyValue Variables ColorLaberPla $UserInput$ #@#\Config\Styles.inc]"][!ShowMeter TypeboxColor][!PluginBang "MeterInputLaberPla ExecuteBatch 1"]
ToolTipType=1
ToolTipText=Cuerpo
Hidden=#HideGroup2#

[ColorMarteAtmB]
Group=Pag2
Meter = Image
ImageName = #@#\Images\Settings\Button.png
ImageTint = #ColorMarteAtm#
x = 665
y = 208
LeftMouseDownAction = [!ShowMeter WarningInput][!HideMeter ResetColor][!SetOption TypeboxColor ImageTint #ColorMarteAtm#][!SetOption InputColor DefaultValue #ColorMarteAtm#][!SetOption InputColor Command1 "[!WriteKeyValue Variables ColorLaberPla $UserInput$ #@#\Config\Styles.inc]"][!ShowMeter TypeboxColor][!PluginBang "MeterInputMarteAtm ExecuteBatch 1"]
ToolTipType=1
ToolTipText=Atmófera
Hidden=#HideGroup2#

[ColorBrillosAtmB]
Group=Pag2
Meter = Image
ImageName = #@#\Images\Settings\Button.png
ImageTint = #ColorBrillosAtm#
x = 439
y = 246
LeftMouseDownAction = [!ShowMeter WarningInput][!HideMeter ResetColor][!SetOption TypeboxColor ImageTint #ColorBrillosAtm#][!SetOption InputColor DefaultValue #ColorBrillosAtm#][!SetOption InputColor Command1 "[!WriteKeyValue Variables ColorBrillosAtm $UserInput$ #@#\Config\Styles.inc]"][!ShowMeter TypeboxColor][!PluginBang "MeterInputBrillosAtm ExecuteBatch 1"]
ToolTipType=1
ToolTipText=Atmófera
Hidden=#HideGroup2#

[ColorBrillosPlaB]
Group=Pag2
Meter = Image
ImageName = #@#\Images\Settings\Button.png
ImageTint = #ColorBrillosPla#
x = 484
y = 246
LeftMouseDownAction = [!ShowMeter WarningInput][!HideMeter ResetColor][!SetOption TypeboxColor ImageTint #ColorBrillosPla#][!SetOption InputColor DefaultValue #ColorBrillosPla#][!SetOption InputColor Command1 "[!WriteKeyValue Variables ColorBrillosPla $UserInput$ #@#\Config\Styles.inc]"][!ShowMeter TypeboxColor][!PluginBang "MeterInputBrillosPla ExecuteBatch 1"]
ToolTipType=1
ToolTipText=Cuerpo
Hidden=#HideGroup2#

[ColorLunaAtmB]
Group=Pag2
Meter = Image
ImageName = #@#\Images\Settings\Button.png
ImageTint = #ColorLunaAtm#
x = 529
y = 246
LeftMouseDownAction = [!ShowMeter WarningInput][!HideMeter ResetColor][!SetOption TypeboxColor ImageTint #ColorLunaAtm#][!SetOption InputColor DefaultValue #ColorLunaAtm#][!SetOption InputColor Command1 "[!WriteKeyValue Variables ColorLunaAtm $UserInput$ #@#\Config\Styles.inc]"][!ShowMeter TypeboxColor][!PluginBang "MeterInputLunaAtm ExecuteBatch 1"]
ToolTipType=1
ToolTipText=Atmófera
Hidden=#HideGroup2#

[ColorLunaPlaB]
Group=Pag2
Meter = Image
ImageName = #@#\Images\Settings\Button.png
ImageTint = #ColorLunaPla#
x = 574
y = 246
LeftMouseDownAction = [!ShowMeter WarningInput][!HideMeter ResetColor][!SetOption TypeboxColor ImageTint #ColorLunaPla#][!SetOption InputColor DefaultValue #ColorLunaPla#][!SetOption InputColor Command1 "[!WriteKeyValue Variables ColorLunaPla $UserInput$ #@#\Config\Styles.inc]"][!ShowMeter TypeboxColor][!PluginBang "MeterInputLunaPla ExecuteBatch 1"]
ToolTipType=1
ToolTipText=Cuerpo
Hidden=#HideGroup2#

[ColorSolPlaB]
Group=Pag2
Meter = Image
ImageName = #@#\Images\Settings\Button.png
ImageTint = #ColorSolPla#
x = 619
y = 246
LeftMouseDownAction = [!ShowMeter WarningInput][!HideMeter ResetColor][!SetOption TypeboxColor ImageTint #ColorSolPla#][!SetOption InputColor DefaultValue #ColorSolPla#][!SetOption InputColor Command1 "[!WriteKeyValue Variables ColorSolPla $UserInput$ #@#\Config\Styles.inc]"][!ShowMeter TypeboxColor][!PluginBang "MeterInputSolPla ExecuteBatch 1"]
ToolTipType=1
ToolTipText=Cuerpo
Hidden=#HideGroup2#

;-----------------------------------------------------------
;     Escribir Valores de Colores Pag 2
;-----------------------------------------------------------

[MeterInputFGPU]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=10
X=518
Y=432
W=95
H=15
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables ColorFGPU "$UserInput$""#@#\Config\Styles.inc"][!RainmeterRefreshApp] 
DefaultValue=""

[MeterInputFCPU]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=10
X=518
Y=432
W=95
H=15
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables ColorFCPU "$UserInput$""#@#\Config\Styles.inc"][!RainmeterRefreshApp] 
DefaultValue=""

[MeterInputBG]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=10
X=518
Y=432
W=95
H=15
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables BackgColor "$UserInput$""#@#\Config\Styles.inc"][!RainmeterRefreshApp] 
DefaultValue=""

[MeterInputG1]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=10
X=518
Y=432
W=95
H=15
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables ColorLine1 "$UserInput$""#@#\Config\Styles.inc"][!RainmeterRefreshApp] 
DefaultValue=""

[MeterInputG2]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=10
X=518
Y=432
W=95
H=15
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables ColorLine2 "$UserInput$""#@#\Config\Styles.inc"][!RainmeterRefreshApp] 
DefaultValue=""

[MeterInputG3]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=10
X=518
Y=432
W=95
H=15
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables ColorLine3 "$UserInput$""#@#\Config\Styles.inc"][!RainmeterRefreshApp] 
DefaultValue=""

[MeterInputG4]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=10
X=518
Y=432
W=95
H=15
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables ColorLine4 "$UserInput$""#@#\Config\Styles.inc"][!RainmeterRefreshApp] 
DefaultValue=""

[MeterInputG5]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=10
X=518
Y=432
W=95
H=15
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables ColorLine5 "$UserInput$""#@#\Config\Styles.inc"][!RainmeterRefreshApp] 
DefaultValue=""

[MeterInputVenusAtm]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=10
X=518
Y=432
W=95
H=15
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables ColorVenusAtm "$UserInput$""#@#\Config\Styles.inc"][!RainmeterRefreshApp] 
DefaultValue=""

[MeterInputVenusPla]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=10
X=518
Y=432
W=95
H=15
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables ColorVenusPla "$UserInput$""#@#\Config\Styles.inc"][!RainmeterRefreshApp] 
DefaultValue=""

[MeterInputTierraAtm]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=10
X=518
Y=432
W=95
H=15
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables ColorTierraAtm "$UserInput$""#@#\Config\Styles.inc"][!RainmeterRefreshApp] 
DefaultValue=""

[MeterInputLaberAtm]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=10
X=518
Y=432
W=95
H=15
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables ColorLaberAtm "$UserInput$""#@#\Config\Styles.inc"][!RainmeterRefreshApp] 
DefaultValue=""

[MeterInputLaberPla]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=10
X=518
Y=432
W=95
H=15
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables ColorLaberPla "$UserInput$""#@#\Config\Styles.inc"][!RainmeterRefreshApp] 
DefaultValue=""

[MeterInputMarteAtm]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=10
X=518
Y=432
W=95
H=15
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables ColorMarteAtm "$UserInput$""#@#\Config\Styles.inc"][!RainmeterRefreshApp] 
DefaultValue=""

[MeterInputBrillosAtm]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=10
X=518
Y=432
W=95
H=15
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables ColorBrillosAtm "$UserInput$""#@#\Config\Styles.inc"][!RainmeterRefreshApp] 
DefaultValue=""

[MeterInputBrillosPla]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=10
X=518
Y=432
W=95
H=15
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables ColorBrillosPla "$UserInput$""#@#\Config\Styles.inc"][!RainmeterRefreshApp] 
DefaultValue=""

[MeterInputLunaAtm]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=10
X=518
Y=432
W=95
H=15
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables ColorLunaAtm "$UserInput$""#@#\Config\Styles.inc"][!RainmeterRefreshApp] 
DefaultValue=""

[MeterInputLunaPla]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=10
X=518
Y=432
W=95
H=15
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables ColorLunaPla "$UserInput$""#@#\Config\Styles.inc"][!RainmeterRefreshApp] 
DefaultValue=""

[MeterInputSolPla]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=10
X=518
Y=432
W=95
H=15
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables ColorSolPla "$UserInput$""#@#\Config\Styles.inc"][!RainmeterRefreshApp] 
DefaultValue=""

;-----------------------------------------------------------
;     Resetear Colores Pag 2
;-----------------------------------------------------------

[ResetColor]
Group=Pag2
Meter=Image
ImageName=#@#\Images\Settings\resetcolors.png
x=518
y=430
W=95
H=20
LeftMouseDownAction=[!WriteKeyValue Variables ColorFCPU "#DColorFCPU#""#@#\Config\Styles.inc"][!WriteKeyValue Variables ColorFGPU "#DColorFGPU#""#@#\Config\Styles.inc"][!WriteKeyValue Variables BackgColor "#DBackgColor#""#@#\Config\Styles.inc"][!WriteKeyValue Variables ColorLine1 "#DColorLine1#""#@#\Config\Styles.inc"][!WriteKeyValue Variables ColorLine2 "#DColorLine2#""#@#\Config\Styles.inc"][!WriteKeyValue Variables ColorLine3 "#DColorLine3#""#@#\Config\Styles.inc"][!WriteKeyValue Variables ColorLine4 "#DColorLine4#""#@#\Config\Styles.inc"][!WriteKeyValue Variables ColorLine5 "#DColorLine5#""#@#\Config\Styles.inc"][!WriteKeyValue Variables ColorVenusAtm "#DColorVenusAtm#""#@#\Config\Styles.inc"][!WriteKeyValue Variables ColorVenusPla "#DColorVenusPla#""#@#\Config\Styles.inc"][!WriteKeyValue Variables ColorTierraAtm "#DColorTierraAtm#""#@#\Config\Styles.inc"][!WriteKeyValue Variables ColorLaberAtm "#DColorLaberAtm#""#@#\Config\Styles.inc"][!WriteKeyValue Variables ColorLaberPla "#DColorLaberPla#""#@#\Config\Styles.inc"][!WriteKeyValue Variables ColorMarteAtm "#DColorMarteAtm#""#@#\Config\Styles.inc"][!WriteKeyValue Variables ColorBrillosAtm "#DColorBrillosAtm#""#@#\Config\Styles.inc"][!WriteKeyValue Variables ColorBrillosPla "#DColorBrillosPla#""#@#\Config\Styles.inc"][!WriteKeyValue Variables ColorLunaAtm "#DColorLunaAtm#""#@#\Config\Styles.inc"][!WriteKeyValue Variables ColorLunaPla "#DColorLunaPla#""#@#\Config\Styles.inc"][!WriteKeyValue Variables ColorSolPla "#DColorSolPla#""#@#\Config\Styles.inc"][!Refresh][!RainmeterRefreshApp]
MouseOverAction=[!SetOption ResetColor ImageTint 182,70,70]
MouseLeaveAction=[!SetOption ResetColor ImageTint 255,255,255]
Hidden=#HideGroup2#

;-----------------------------------------------------------
;     Resetear Configuración Pag 2
;-----------------------------------------------------------

[ResetConfig]
Group=Pag2
Meter=Image
ImageName=#@#\Images\Settings\resetconfig.png
x=240
y=430
W=95
H=20
LeftMouseDownAction=[!WriteKeyValue Variables LinesBox "#DLinesBox#""#@#\Config\Variables.inc"][!WriteKeyValue Variables VMaxC "#DVMaxC#""#@#\Config\Variables.inc"][!WriteKeyValue Variables VelC8 "#DVelC8#""#@#\Config\Variables.inc"][!WriteKeyValue Variables VelC7 "#DVelC7#""#@#\Config\Variables.inc"][!WriteKeyValue Variables VelC6 "#DVelC6#""#@#\Config\Variables.inc"][!WriteKeyValue Variables VelC5 "#DVelC5#""#@#\Config\Variables.inc"][!WriteKeyValue Variables VelC4 "#DVelC4#""#@#\Config\Variables.inc"][!WriteKeyValue Variables VelC3 "#DVelC3#""#@#\Config\Variables.inc"][!WriteKeyValue Variables VelC2 "#DVelC2#""#@#\Config\Variables.inc"][!WriteKeyValue Variables VelC1 "#DVelC1#""#@#\Config\Variables.inc"][!WriteKeyValue Variables VMinC "#DVMinC#""#@#\Config\Variables.inc"][!WriteKeyValue Variables DivCPU "#DDivCPU#""#@#\Config\Variables.inc"][!WriteKeyValue Variables VMaxG "#DVMaxG#""#@#\Config\Variables.inc"][!WriteKeyValue Variables VelG8 "#DVelG8#""#@#\Config\Variables.inc"][!WriteKeyValue Variables VelG7 "#DVelG7#""#@#\Config\Variables.inc"][!WriteKeyValue Variables VelG6 "#DVelG6#""#@#\Config\Variables.inc"][!WriteKeyValue Variables VelG5 "#DVelG5#""#@#\Config\Variables.inc"][!WriteKeyValue Variables VelG4 "#DVelG4#""#@#\Config\Variables.inc"][!WriteKeyValue Variables VelG3 "#DVelG3#""#@#\Config\Variables.inc"][!WriteKeyValue Variables VelG2 "#DVelG2#""#@#\Config\Variables.inc"][!WriteKeyValue Variables VelG1 "#DVelG1#""#@#\Config\Variables.inc"][!WriteKeyValue Variables VMinG "#DVMinG#""#@#\Config\Variables.inc"][!WriteKeyValue Variables DivGPU "#DDivGPU#""#@#\Config\Variables.inc"][!WriteKeyValue Variables MilisegPing "#DMilisegPing#""#@#\Config\Variables.inc"][!WriteKeyValue Variables Transparent "#DTransparent#""#@#\Config\Variables.inc"][!WriteKeyValue Variables Ping1 "#DPing1#""#@#\Config\Variables.inc"][!WriteKeyValue Variables Select "#DSelect#""#@#\Config\Variables.inc"][!WriteKeyValue Variables Ping2 "#DPing2#""#@#\Config\Variables.inc"][!WriteKeyValue Variables CompInter "#DCompInter#""#@#\Config\Variables.inc"][!WriteKeyValue Variables Ping3 "#DPing3#""#@#\Config\Variables.inc"][!WriteKeyValue Variables Ping4 "#DPing4#""#@#\Config\Variables.inc"][!WriteKeyValue Variables Ping5 "#DPing5#""#@#\Config\Variables.inc"][!WriteKeyValue Variables Ping6 "#DPing6#""#@#\Config\Variables.inc"][!WriteKeyValue Variables Ping7 "#DPing7#""#@#\Config\Variables.inc"][!WriteKeyValue Variables Ping8 "#DPing8#""#@#\Config\Variables.inc"][!WriteKeyValue Variables Ping9 "#DPing9#""#@#\Config\Variables.inc"][!WriteKeyValue Variables RegFANS "#DRegFANS#""#@#\Config\Variables.inc"][!WriteKeyValue Variables FanSis1 "#DFanSis1#""#@#\Config\Variables.inc"][!WriteKeyValue Variables FanSis2 "#DFanSis2#""#@#\Config\Variables.inc"][!WriteKeyValue Variables FanSis3 "#DFanSis3#""#@#\Config\Variables.inc"][!WriteKeyValue Variables RegHDDT "#DRegHDDT#""#@#\Config\Variables.inc"][!WriteKeyValue Variables RegHDDU "#DRegHDDU#""#@#\Config\Variables.inc"][!WriteKeyValue Variables MaxGPU-RAM "#DMaxGPU-RAM#""#@#\Config\Variables.inc"][!Refresh][!RainmeterRefreshApp]
MouseOverAction=[!SetOption ResetConfig ImageTint 182,70,70]
MouseLeaveAction=[!SetOption ResetConfig ImageTint 255,255,255]
Hidden=#HideGroup2#

;-----------------------------------------------------------
;     Boton de escritura de los Colores
;-----------------------------------------------------------

[TypeboxColor]
Meter = Image
ImageName = #@#\Images\Settings\typebox2.png
x = 517
y = 430
W=98
H=19
Hidden = 1

[InputColor]
Measure = Plugin
Plugin = InputText
SolidColor = ffffff
FontFace = Roboto
FontSize = 10
FontColor = 5e5e5e
AntiAlias = 1
x = 518
y = 430
w = 61
h = 17
InputLimit = 6
Command2 = [!Refresh][!RainmeterRefreshApp]
OnDismissAction = [!HideMeter TypeboxColor][!HideMeter WarningInput][!ShowMeter ResetColor]

[InputColor2]
Measure = Plugin
Plugin = InputText
SolidColor = ffffff
FontFace = Roboto
FontSize = 10
FontColor = 5e5e5e
AntiAlias = 1
x = 240
y = 430
w = 61
h = 17
;InputLimit = 6

[WarningInput]
Meter = Image
ImageName = #@#\Images\Settings\enterwarning.png
x = 497
y = 455
Hidden = 1

;-----------------------------------------------------------
;     Comprobación estado Activo de las Pieles
;-----------------------------------------------------------

[MeasureActive1]
Group=Comp
Measure=Plugin
Plugin=ConfigActive
ConfigName=#Config1#
DynamicVariables=1
IfCondition=(MeasureActive1 = 1) && (#Pagina# = 2)
IfTrueAction=[!ShowMeter ColorLunaAtmB][!ShowMeter ColorLunaPlaB][!ShowMeter MeterNombre45][!UpdateMeter *][!Redraw]
IfFalseAction=[!HideMeter ColorLunaAtmB][!HideMeter ColorLunaPlaB][!HideMeter MeterNombre45][!UpdateMeter *][!Redraw]

[MeasureActive2]
Group=Comp
Measure=Plugin
Plugin=ConfigActive
ConfigName=#Config2#
DynamicVariables=1
IfCondition=(MeasureActive2 = 1) && (#Pagina# = 2)
IfTrueAction=[!ShowMeter ColorSolPlaB][!ShowMeter MeterNombre46][!UpdateMeter *][!Redraw]
IfFalseAction=[!HideMeter ColorSolPlaB][!HideMeter MeterNombre46][!UpdateMeter *][!Redraw]

[MeasureActive3]
Group=Comp
Measure=Plugin
Plugin=ConfigActive
ConfigName=#Config3#
DynamicVariables=1
IfCondition=(MeasureActive3 = 1) && (#Pagina# = 2)
IfTrueAction=[!ShowMeter ColorG3][!ShowMeter ColorG4][!ShowMeter ColorG5][!UpdateMeter *][!Redraw]
IfFalseAction=[!HideMeter ColorG3][!HideMeter ColorG4][!HideMeter ColorG5][!UpdateMeter *][!Redraw]

Post by **Yincognito** » September 15th, 2023, 2:48 pm

arcanosa84 wrote: ↑September 15th, 2023, 2:10 pm Even after adding it, it still doesn't work, the active skin check does not update when I change pages, I give you the complete code if you want to try it

Code: Select all

[Rainmeter]
Update=500
Author=AlexSoft
DynamicWindowSize=1
AccurateText=1


[Variables]
@Include=#@#\Config\Variables.inc
@Include2=#@#\Config\Styles.inc
@Include3=#@#\Config\Links.inc
@Include4=#@#\Config\Default.inc

Pagina=1

; Poner en 1 los 2 para poner en funcion las 2 paginas
HideGroup2=1

Config1=@Al\Planetas\Luna
Config2=@Al\Planetas\Sol
Config3=@Al\Graficos\FanSystem

;-----------------------------------------------------------
;     Rectangulos Skin General
;-----------------------------------------------------------

[MeterSettingsBg]
Meter=Shape
X=0
Y=40
Shape=Rectangle 1,1,720,440 | Fill Color 100,100,100 | Stroke Color 255,255,255,255

[MeterSettingsBg2]
Meter=Shape
X=0
Y=0
Shape=Rectangle 1,1,720,40 | Fill Color 64,154,255 | Stroke Color 255,255,255,255

[MeterClose]
Meter=Shape
X=688
Y=10
Shape=Rectangle 1,1,21,20 | Fill Color 0,0,0,0 | Stroke Color 0,0,0

[CloseHover]
Meter=Shape
Shape=Rectangle 0,0,21,20 | Fill Color 255,0,0,155 | StrokeWidth 0
x=1r
y=1r
Hidden=1

[MeterUpdate]
Meter=Shape
X=658
Y=10
Shape=Rectangle 1,1,21,20 | Fill Color 0,0,0,0 | Stroke Color 0,0,0

[UpdateHover]
Meter=Shape
Shape=Rectangle 0,0,21,20 | Fill Color 62,253,62,155 | StrokeWidth 0
x=1r
y=1r
Hidden=1

;-----------------------------------------------------------
;     Barra Superior - Botón Cerrar - Botón Actualizar
;-----------------------------------------------------------

[MeterSettingsText]
Meter=String
StringAlign=Center
FontFace=Segoe UI Light
FontColor=255,255,255
FontSize=15
X=360
Y=6
Text=">   C     O     N     F     I     G     U     R     A     C     I     Ó     N   <"
AntiAlias=1

[Close]
Meter=Image
ImageName=#@#\Images\Settings\close.png
x=680
y=1
LeftMouseDownAction=[!DeactivateConfig][!WriteKeyValue Variables settingsCenter 1 #@#\Settings\Settings.ini]
MouseOverAction=[!ShowMeter CloseHover]
MouseLeaveAction=[!HideMeter CloseHover]

[Update]
Meter=Image
ImageName=#@#\Images\Settings\update.png
x=650
y=1
LeftMouseDownAction=[!Refresh][!RainmeterRefreshApp]
MouseOverAction=[!ShowMeter UpdateHover]
MouseLeaveAction=[!HideMeter UpdateHover]

;-----------------------------------------------------------
;     Iconos Pag 1
;-----------------------------------------------------------

[IconPag1Luna]
Group=Pag1
Meter = Image
ImageName = #@#\Images\Luna\Luna\Luna0.png
ImageTint = #ColorLunaPla#
x=150
y=60
w=63
H=44
LeftMouseupAction = [!ToggleConfig "@AL\Planetas\Luna" "Luna.ini"][!UpdateMeter *][!Redraw]
;ToolTipType=1
;ToolTipText=Fan GPU
;Hidden=#HideGroup1#

;-----------------------------------------------------------
;     Cambio de Página
;-----------------------------------------------------------

[CambiodePaginaSig]
Meter = Image
ImageName = #@#\Images\Settings\Siguiente.png
ImageTint = #ColorBotPag#
x = 691
y = 453
LeftMouseUpAction=[!HideMeterGroup Pag1][!ShowMeterGroup Pag2][!ShowMeter "CambiodePaginaAnt"][!HideMeter "CambiodePaginaSig"][!SetVariable Pagina 2][!UpdateMeasureGroup Comp][!UpdateMeter *][!Redraw]
ToolTipType=1
ToolTipText=Siguiente
DynamicVariables=1

[CambiodePaginaAnt]
Meter = Image
ImageName = #@#\Images\Settings\Anterior.png
ImageTint = #ColorBotPag#
x = -7
y = 453
LeftMouseUpAction=[!HideMeterGroup Pag2][!ShowMeterGroup Pag1][!ShowMeter "CambiodePaginaSig"][!HideMeter "CambiodePaginaAnt"][!SetVariable Pagina 1][!UpdateMeasureGroup Comp][!UpdateMeter *][!Redraw]
ToolTipType=1
ToolTipText=Anterior
DynamicVariables=1
Hidden=1

;-----------------------------------------------------------
;     Rectangulos y Lineas Pag 2
;-----------------------------------------------------------

[MeterInputLinesBox]
Group=Pag2
Meter=Shape
X=117
Y=70
Shape=Rectangle 1,1,66,15 | Fill Color 0,0,0,0 | Stroke Color 0,0,0
Hidden=#HideGroup2#

[MeterLine]
Group=Pag2
Meter=Shape
X=0
Y=42
Shape=Rectangle 400,0,0,438 | Fill Color 0,0,0,0 | Stroke Color 0,0,0
Hidden=#HideGroup2#

[MeterLine2]
Group=Pag2
Meter=Shape
X=400
Y=145
Shape=Rectangle 0,0,320,0 | Fill Color 0,0,0,0 | Stroke Color 0,0,0
Hidden=#HideGroup2#

[MeterLine3]
Group=Pag2
Meter=Shape
X=400
Y=400
Shape=Rectangle 0,0,320,0 | Fill Color 0,0,0,0 | Stroke Color 0,0,0
Hidden=#HideGroup2#

[MeterLine4]
Group=Pag2
Meter=Shape
X=2
Y=400
Shape=Rectangle 0,0,397,0 | Fill Color 0,0,0,0 | Stroke Color 0,0,0
Hidden=#HideGroup2#

[MeterInputIPM]
Group=Pag2
Meter=Shape
X=117
Y=125
Shape=Rectangle 1,1,66,15 | Fill Color 0,0,0,0 | Stroke Color 0,0,0
Hidden=#HideGroup2#

[MeterInputIPT]
Group=Pag2
Meter=Shape
X=117
Y=145
Shape=Rectangle 1,1,66,15 | Fill Color 0,0,0,0 | Stroke Color 0,0,0
Hidden=#HideGroup2#

[MeterInputIP1]
Group=Pag2
Meter=Shape
X=117
Y=165
Shape=Rectangle 1,1,66,15 | Fill Color 0,0,0,0 | Stroke Color 0,0,0
Hidden=#HideGroup2#

[MeterInputSelect]
Group=Pag2
Meter=Shape
X=117
Y=185
Shape=Rectangle 1,1,66,15 | Fill Color 0,0,0,0 | Stroke Color 0,0,0
Hidden=#HideGroup2#

[MeterInputIP2]
Group=Pag2
Meter=Shape
X=117
Y=205
Shape=Rectangle 1,1,66,15 | Fill Color 0,0,0,0 | Stroke Color 0,0,0
Hidden=#HideGroup2#

[MeterInputIP2C]
Group=Pag2
Meter=Shape
X=117
Y=225
Shape=Rectangle 1,1,66,15 | Fill Color 0,0,0,0 | Stroke Color 0,0,0
Hidden=#HideGroup2#

[MeterInputIP3]
Group=Pag2
Meter=Shape
X=117
Y=245
Shape=Rectangle 1,1,66,15 | Fill Color 0,0,0,0 | Stroke Color 0,0,0
Hidden=#HideGroup2#

[MeterInputIP4]
Group=Pag2
Meter=Shape
X=117
Y=265
Shape=Rectangle 1,1,66,15 | Fill Color 0,0,0,0 | Stroke Color 0,0,0
Hidden=#HideGroup2#

[MeterInputIP5]
Group=Pag2
Meter=Shape
X=117
Y=285
Shape=Rectangle 1,1,66,15 | Fill Color 0,0,0,0 | Stroke Color 0,0,0
Hidden=#HideGroup2#

[MeterInputIP6]
Group=Pag2
Meter=Shape
X=117
Y=305
Shape=Rectangle 1,1,66,15 | Fill Color 0,0,0,0 | Stroke Color 0,0,0
Hidden=#HideGroup2#

[MeterInputIP7]
Group=Pag2
Meter=Shape
X=117
Y=325
Shape=Rectangle 1,1,66,15 | Fill Color 0,0,0,0 | Stroke Color 0,0,0
Hidden=#HideGroup2#

[MeterInputIP8]
Group=Pag2
Meter=Shape
X=117
Y=345
Shape=Rectangle 1,1,66,15 | Fill Color 0,0,0,0 | Stroke Color 0,0,0
Hidden=#HideGroup2#

[MeterInputIP9]
Group=Pag2
Meter=Shape
X=117
Y=365
Shape=Rectangle 1,1,66,15 | Fill Color 0,0,0,0 | Stroke Color 0,0,0
Hidden=#HideGroup2#

[MeterR1]
Group=Pag2
Meter=Shape
X=200
Y=70
Shape=Rectangle 1,1,66,15 | Fill Color 0,0,0,0 | Stroke Color 0,0,0
Hidden=#HideGroup2#

[MeterR2]
Group=Pag2
Meter=Shape
X=200
Y=90
Shape=Rectangle 1,1,66,15 | Fill Color 0,0,0,0 | Stroke Color 0,0,0
Hidden=#HideGroup2#

[MeterR3]
Group=Pag2
Meter=Shape
X=325
Y=70
Shape=Rectangle 1,1,66,15 | Fill Color 0,0,0,0 | Stroke Color 0,0,0
Hidden=#HideGroup2#

[MeterR4]
Group=Pag2
Meter=Shape
X=325
Y=90
Shape=Rectangle 1,1,66,15 | Fill Color 0,0,0,0 | Stroke Color 0,0,0
Hidden=#HideGroup2#

[MeterVMaxGpu]
Group=Pag2
Meter=Shape
X=200
Y=145
Shape=Rectangle 1,1,66,15 | Fill Color 0,0,0,0 | Stroke Color 0,0,0
Hidden=#HideGroup2#

[MeterV8Gpu]
Group=Pag2
Meter=Shape
X=200
Y=165
Shape=Rectangle 1,1,66,15 | Fill Color 0,0,0,0 | Stroke Color 0,0,0
Hidden=#HideGroup2#

[MeterV7Gpu]
Group=Pag2
Meter=Shape
X=200
Y=185
Shape=Rectangle 1,1,66,15 | Fill Color 0,0,0,0 | Stroke Color 0,0,0
Hidden=#HideGroup2#

[MeterV6Gpu]
Group=Pag2
Meter=Shape
X=200
Y=205
Shape=Rectangle 1,1,66,15 | Fill Color 0,0,0,0 | Stroke Color 0,0,0
Hidden=#HideGroup2#

[MeterV5Gpu]
Group=Pag2
Meter=Shape
X=200
Y=225
Shape=Rectangle 1,1,66,15 | Fill Color 0,0,0,0 | Stroke Color 0,0,0
Hidden=#HideGroup2#

[MeterV4Gpu]
Group=Pag2
Meter=Shape
X=200
Y=245
Shape=Rectangle 1,1,66,15 | Fill Color 0,0,0,0 | Stroke Color 0,0,0
Hidden=#HideGroup2#

[MeterV3Gpu]
Group=Pag2
Meter=Shape
X=200
Y=265
Shape=Rectangle 1,1,66,15 | Fill Color 0,0,0,0 | Stroke Color 0,0,0
Hidden=#HideGroup2#

[MeterV2Gpu]
Group=Pag2
Meter=Shape
X=200
Y=285
Shape=Rectangle 1,1,66,15 | Fill Color 0,0,0,0 | Stroke Color 0,0,0
Hidden=#HideGroup2#

[MeterV1Gpu]
Group=Pag2
Meter=Shape
X=200
Y=305
Shape=Rectangle 1,1,66,15 | Fill Color 0,0,0,0 | Stroke Color 0,0,0
Hidden=#HideGroup2#

[MeterVMinGpu]
Group=Pag2
Meter=Shape
X=200
Y=325
Shape=Rectangle 1,1,66,15 | Fill Color 0,0,0,0 | Stroke Color 0,0,0
Hidden=#HideGroup2#

[MeterDivGpu]
Group=Pag2
Meter=Shape
X=200
Y=345
Shape=Rectangle 1,1,66,15 | Fill Color 0,0,0,0 | Stroke Color 0,0,0
Hidden=#HideGroup2#

[MeterVMaxCPU]
Group=Pag2
Meter=Shape
X=325
Y=145
Shape=Rectangle 1,1,66,15 | Fill Color 0,0,0,0 | Stroke Color 0,0,0
Hidden=#HideGroup2#

[MeterV8CPU]
Group=Pag2
Meter=Shape
X=325
Y=165
Shape=Rectangle 1,1,66,15 | Fill Color 0,0,0,0 | Stroke Color 0,0,0
Hidden=#HideGroup2#

[MeterV7CPU]
Group=Pag2
Meter=Shape
X=325
Y=185
Shape=Rectangle 1,1,66,15 | Fill Color 0,0,0,0 | Stroke Color 0,0,0
Hidden=#HideGroup2#

[MeterV6CPU]
Group=Pag2
Meter=Shape
X=325
Y=205
Shape=Rectangle 1,1,66,15 | Fill Color 0,0,0,0 | Stroke Color 0,0,0
Hidden=#HideGroup2#

[MeterV5CPU]
Group=Pag2
Meter=Shape
X=325
Y=225
Shape=Rectangle 1,1,66,15 | Fill Color 0,0,0,0 | Stroke Color 0,0,0
Hidden=#HideGroup2#

[MeterV4CPU]
Group=Pag2
Meter=Shape
X=325
Y=245
Shape=Rectangle 1,1,66,15 | Fill Color 0,0,0,0 | Stroke Color 0,0,0
Hidden=#HideGroup2#

[MeterV3CPU]
Group=Pag2
Meter=Shape
X=325
Y=265
Shape=Rectangle 1,1,66,15 | Fill Color 0,0,0,0 | Stroke Color 0,0,0
Hidden=#HideGroup2#

[MeterV2CPU]
Group=Pag2
Meter=Shape
X=325
Y=285
Shape=Rectangle 1,1,66,15 | Fill Color 0,0,0,0 | Stroke Color 0,0,0
Hidden=#HideGroup2#

[MeterV1CPU]
Group=Pag2
Meter=Shape
X=325
Y=305
Shape=Rectangle 1,1,66,15 | Fill Color 0,0,0,0 | Stroke Color 0,0,0
Hidden=#HideGroup2#

[MeterVMinCPU]
Group=Pag2
Meter=Shape
X=325
Y=325
Shape=Rectangle 1,1,66,15 | Fill Color 0,0,0,0 | Stroke Color 0,0,0
Hidden=#HideGroup2#

[MeterDivCPU]
Group=Pag2
Meter=Shape
X=325
Y=345
Shape=Rectangle 1,1,66,15 | Fill Color 0,0,0,0 | Stroke Color 0,0,0
Hidden=#HideGroup2#

[MeterMaxGDDR]
Group=Pag2
Meter=Shape
X=325
Y=375
Shape=Rectangle 1,1,66,15 | Fill Color 0,0,0,0 | Stroke Color 0,0,0
Hidden=#HideGroup2#

[MeterInputFS1]
Group=Pag2
Meter=Shape
X=117
Y=420
Shape=Rectangle 1,1,66,15 | Fill Color 0,0,0,0 | Stroke Color 0,0,0
Hidden=#HideGroup2#

[MeterInputFS2]
Group=Pag2
Meter=Shape
X=117
Y=440
Shape=Rectangle 1,1,66,15 | Fill Color 0,0,0,0 | Stroke Color 0,0,0
Hidden=#HideGroup2#

[MeterInputFS3]
Group=Pag2
Meter=Shape
X=117
Y=460
Shape=Rectangle 1,1,66,15 | Fill Color 0,0,0,0 | Stroke Color 0,0,0
Hidden=#HideGroup2#

;-----------------------------------------------------------
;     Nombres,Categorias y Subtitulos Pag 2
;-----------------------------------------------------------

[MeterNombre1]
Group=Pag2
Meter=String
StringAlign=Center
FontFace=Segoe UI Light
FontColor=0,0,0
FontSize=10
X=90
Y=45
Text=>Mis Accesos<
AntiAlias=1
Hidden=#HideGroup2#

[MeterNombre2]
Group=Pag2
Meter=String
StringAlign=Left
FontFace=Segoe UI Light
FontColor=0,0,0
FontSize=10
X=10
Y=70
Text=Cant. Líneas >>> 
AntiAlias=1
Hidden=#HideGroup2#

[MeterNombre3]
Group=Pag2
Meter=String
StringAlign=Center
FontFace=Segoe UI Light
FontColor=0,0,0
FontSize=10
X=90
Y=98
Text=>Mis Direcciones IPs<
AntiAlias=1
Hidden=#HideGroup2#

[MeterNombre4]
Group=Pag2
Meter=String
StringAlign=Center
FontFace=Segoe UI Light
FontColor=0,0,0
FontSize=9
X=60
Y=124
Text=Tiempo Ping (Mseg)>
AntiAlias=1
Hidden=#HideGroup2#

[MeterNombre5]
Group=Pag2
Meter=String
StringAlign=Center
FontFace=Segoe UI Light
FontColor=0,0,0
FontSize=9
X=60
Y=144
Text=Transparencia>
AntiAlias=1
Hidden=#HideGroup2#

[MeterNombre6]
Group=Pag2
Meter=String
StringAlign=Center
FontFace=Segoe UI Light
FontColor=0,0,0
FontSize=9
X=60
Y=164
Text=AP Auxiliar>
AntiAlias=1
Hidden=#HideGroup2#

[MeterNombre7]
Group=Pag2
Meter=String
StringAlign=Center
FontFace=Segoe UI Light
FontColor=0,0,0
FontSize=9
X=60
Y=184
Text=Select (Ping o Int.)>
AntiAlias=1
Hidden=#HideGroup2#

[MeterNombre8]
Group=Pag2
Meter=String
StringAlign=Center
FontFace=Segoe UI Light
FontColor=0,0,0
FontSize=9
X=60
Y=204
Text=IP Internet>
AntiAlias=1
Hidden=#HideGroup2#

[MeterNombre9]
Group=Pag2
Meter=String
StringAlign=Center
FontFace=Segoe UI Light
FontColor=0,0,0
FontSize=9
X=60
Y=224
Text=Tiempo Ping (Mseg)>
AntiAlias=1
Hidden=#HideGroup2#

[MeterNombre10]
Group=Pag2
Meter=String
StringAlign=Center
FontFace=Segoe UI Light
FontColor=0,0,0
FontSize=9
X=60
Y=244
Text=Móvil Alex>
AntiAlias=1
Hidden=#HideGroup2#

[MeterNombre11]
Group=Pag2
Meter=String
StringAlign=Center
FontFace=Segoe UI Light
FontColor=0,0,0
FontSize=9
X=60
Y=264
Text=Móvil Lena>
AntiAlias=1
Hidden=#HideGroup2#

[MeterNombre12]
Group=Pag2
Meter=String
StringAlign=Center
FontFace=Segoe UI Light
FontColor=0,0,0
FontSize=9
X=60
Y=284
Text=Laptop WiFi>
AntiAlias=1
Hidden=#HideGroup2#

[MeterNombre13]
Group=Pag2
Meter=String
StringAlign=Center
FontFace=Segoe UI Light
FontColor=0,0,0
FontSize=9
X=60
Y=304
Text=Laptop LAN>
AntiAlias=1
Hidden=#HideGroup2#

[MeterNombre14]
Group=Pag2
Meter=String
StringAlign=Center
FontFace=Segoe UI Light
FontColor=0,0,0
FontSize=9
X=60
Y=324
Text=Equipo Invitado 1>
AntiAlias=1
Hidden=#HideGroup2#

[MeterNombre15]
Group=Pag2
Meter=String
StringAlign=Center
FontFace=Segoe UI Light
FontColor=0,0,0
FontSize=9
X=60
Y=344
Text=Equipo Invitado 2>
AntiAlias=1
Hidden=#HideGroup2#

[MeterNombre16]
Group=Pag2
Meter=String
StringAlign=Center
FontFace=Segoe UI Light
FontColor=0,0,0
FontSize=9
X=60
Y=364
Text=Equipo Invitado 3>
AntiAlias=1
Hidden=#HideGroup2#

[MeterNombre17]
Group=Pag2
Meter=String
StringAlign=Center
FontFace=Segoe UI Light
FontColor=0,0,0
FontSize=10
X=290
Y=45
Text=>Vínculos al Registro<
AntiAlias=1
Hidden=#HideGroup2#

[MeterNombre18]
Group=Pag2
Meter=String
StringAlign=Center
FontFace=Segoe UI Light
FontColor=0,0,0
FontSize=7
X=296
Y=71
Text=<V.F.M-U.T.D>
AntiAlias=1
Hidden=#HideGroup2#

[MeterNombre19]
Group=Pag2
Meter=String
StringAlign=Center
FontFace=Segoe UI Light
FontColor=0,0,0
FontSize=7
X=296
Y=91
Text=<T.D.S-N.T.U>
AntiAlias=1
Hidden=#HideGroup2#

[MeterNombre20]
Group=Pag2
Meter=String
StringAlign=Center
FontFace=Segoe UI Light
FontColor=0,0,0
FontSize=10
X=296
Y=110
Text=>Control Velocidades Fan<
AntiAlias=1
Hidden=#HideGroup2#

[MeterNombre21]
Group=Pag2
Meter=String
StringAlign=Center
FontFace=Segoe UI Light
FontColor=0,0,0
FontSize=10
X=233
Y=126
Text=>GPU<
AntiAlias=1
Hidden=#HideGroup2#

[MeterNombre22]
Group=Pag2
Meter=String
StringAlign=Center
FontFace=Segoe UI Light
FontColor=0,0,0
FontSize=10
X=360
Y=126
Text=>CPU<
AntiAlias=1
Hidden=#HideGroup2#

[MeterNombre23]
Group=Pag2
Meter=String
StringAlign=Center
FontFace=Segoe UI Light
FontColor=0,0,0
FontSize=8
X=295
Y=145
Text=< Vel Max >
AntiAlias=1
Hidden=#HideGroup2#

[MeterNombre24]
Group=Pag2
Meter=String
StringAlign=Center
FontFace=Segoe UI Light
FontColor=0,0,0
FontSize=8
X=295
Y=165
Text=< Vel #08 >
AntiAlias=1
Hidden=#HideGroup2#

[MeterNombre25]
Group=Pag2
Meter=String
StringAlign=Center
FontFace=Segoe UI Light
FontColor=0,0,0
FontSize=8
X=295
Y=185
Text=< Vel #07 >
AntiAlias=1
Hidden=#HideGroup2#

[MeterNombre26]
Group=Pag2
Meter=String
StringAlign=Center
FontFace=Segoe UI Light
FontColor=0,0,0
FontSize=8
X=295
Y=205
Text=< Vel #06 >
AntiAlias=1
Hidden=#HideGroup2#

[MeterNombre27]
Group=Pag2
Meter=String
StringAlign=Center
FontFace=Segoe UI Light
FontColor=0,0,0
FontSize=8
X=295
Y=225
Text=< Vel #05 >
AntiAlias=1
Hidden=#HideGroup2#

[MeterNombre28]
Group=Pag2
Meter=String
StringAlign=Center
FontFace=Segoe UI Light
FontColor=0,0,0
FontSize=8
X=295
Y=245
Text=< Vel #04 >
AntiAlias=1
Hidden=#HideGroup2#

[MeterNombre29]
Group=Pag2
Meter=String
StringAlign=Center
FontFace=Segoe UI Light
FontColor=0,0,0
FontSize=8
X=295
Y=265
Text=< Vel #03 >
AntiAlias=1
Hidden=#HideGroup2#

[MeterNombre30]
Group=Pag2
Meter=String
StringAlign=Center
FontFace=Segoe UI Light
FontColor=0,0,0
FontSize=8
X=295
Y=285
Text=< Vel #02 >
AntiAlias=1
Hidden=#HideGroup2#

[MeterNombre31]
Group=Pag2
Meter=String
StringAlign=Center
FontFace=Segoe UI Light
FontColor=0,0,0
FontSize=8
X=295
Y=305
Text=< Vel #01 >
AntiAlias=1
Hidden=#HideGroup2#

[MeterNombre32]
Group=Pag2
Meter=String
StringAlign=Center
FontFace=Segoe UI Light
FontColor=0,0,0
FontSize=8
X=295
Y=325
Text=< Vel Min >
AntiAlias=1
Hidden=#HideGroup2#

[MeterNombre33]
Group=Pag2
Meter=String
StringAlign=Center
FontFace=Segoe UI Light
FontColor=0,0,0
FontSize=8
X=295
Y=345
Text=< Divisor >
AntiAlias=1
Hidden=#HideGroup2#

[MeterNombre34]
Group=Pag2
Meter=String
StringAlign=Center
FontFace=Segoe UI Light
FontColor=0,0,0
FontSize=8
X=284
Y=375
Text=> Max GDDR <
AntiAlias=1
Hidden=#HideGroup2#

[MeterNombre35]
Group=Pag2
Meter=String
StringAlign=Center
FontFace=Segoe UI Light
FontColor=0,0,0
FontSize=9
X=98
Y=401
Text=>Vínculos al Registro<
AntiAlias=1
Hidden=#HideGroup2#

[MeterNombre36]
Group=Pag2
Meter=String
StringAlign=Center
FontFace=Segoe UI Light
FontColor=0,0,0
FontSize=9
X=60
Y=418
Text=Fan Sistema 1>
AntiAlias=1
Hidden=#HideGroup2#

[MeterNombre37]
Group=Pag2
Meter=String
StringAlign=Center
FontFace=Segoe UI Light
FontColor=0,0,0
FontSize=9
X=60
Y=438
Text=Fan Sistema 2>
AntiAlias=1
Hidden=#HideGroup2#

[MeterNombre38]
Group=Pag2
Meter=String
StringAlign=Center
FontFace=Segoe UI Light
FontColor=0,0,0
FontSize=9
X=60
Y=458
Text=Fan Sistema 3>
AntiAlias=1
Hidden=#HideGroup2#

[MeterNombre39]
Group=Pag2
Meter=String
StringAlign=Center
FontFace=Segoe UI Light
FontColor=0,0,0
FontSize=8
X=558
Y=148
Text=> Colores Gráficos <
AntiAlias=1
Hidden=#HideGroup2#

[MeterNombre40]
Group=Pag2
Meter=String
StringAlign=Center
FontFace=Segoe UI Light
FontColor=0,0,0
FontSize=8
X=470
Y=222
Text=^Venus^
AntiAlias=1
Hidden=#HideGroup2#

[MeterNombre41]
Group=Pag2
Meter=String
StringAlign=Center
FontFace=Segoe UI Light
FontColor=0,0,0
FontSize=8
X=536
Y=222
Text=^Tierra^
AntiAlias=1
Hidden=#HideGroup2#

[MeterNombre42]
Group=Pag2
Meter=String
StringAlign=Center
FontFace=Segoe UI Light
FontColor=0,0,0
FontSize=8
X=603
Y=222
Text=^Laber^
AntiAlias=1
Hidden=#HideGroup2#

[MeterNombre43]
Group=Pag2
Meter=String
StringAlign=Center
FontFace=Segoe UI Light
FontColor=0,0,0
FontSize=8
X=670
Y=222
Text=^Marte^
AntiAlias=1
Hidden=#HideGroup2#

[MeterNombre44]
Group=Pag2
Meter=String
StringAlign=Center
FontFace=Segoe UI Light
FontColor=0,0,0
FontSize=8
X=470
Y=259
Text=^Brillos^
AntiAlias=1
Hidden=#HideGroup2#

[MeterNombre45]
Group=Pag2
Meter=String
StringAlign=Center
FontFace=Segoe UI Light
FontColor=0,0,0
FontSize=8
X=558
Y=259
Text=^Luna^
AntiAlias=1
Hidden=#HideGroup2#

[MeterNombre46]
Group=Pag2
Meter=String
StringAlign=Center
FontFace=Segoe UI Light
FontColor=0,0,0
FontSize=8
X=626
Y=259
Text=^Sol^
AntiAlias=1
Hidden=#HideGroup2#

;-----------------------------------------------------------
;     Lineas de Texto por cada Variable Pag 2
;-----------------------------------------------------------

[MeterCodeLines]
Group=Pag2
Meter=String
StringAlign=Center
FontColor=0,0,0
FontFace=Segoe UI
FontSize=9
X=150
Y=70
Text=#LinesBox#
AntiAlias=1
ToolTipType=1
ToolTipText=Escribe La cantidad de Líneas y Presiona "Enter". Rango Recomendado: 1-30.
LeftMouseUpAction=[!PluginBang "MeterLines ExecuteBatch 1"]
Hidden=#HideGroup2#

[MeterCodeM]
Group=Pag2
Meter=String
StringAlign=Center
FontColor=0,0,0
FontFace=Segoe UI
FontSize=9
X=150
Y=125
Text=#MilisegPing#
AntiAlias=1
ToolTipType=1
ToolTipText=Escribe el tiempo correcto y presione "Enter". Rango Recomendado: 400-1000.
LeftMouseUpAction=[!PluginBang "MeterM ExecuteBatch 1"]
Hidden=#HideGroup2#

[MeterCodeT]
Group=Pag2
Meter=String
StringAlign=Center
FontColor=0,0,0
FontFace=Segoe UI
FontSize=9
X=150
Y=145
Text=#Transparent#
AntiAlias=1
ToolTipType=1
ToolTipText=Escribe un valor y Presiona "Enter". Rango Recomendado: 0-255.
LeftMouseUpAction=[!PluginBang "MeterT ExecuteBatch 1"]
Hidden=#HideGroup2#

[MeterCodeIP1]
Group=Pag2
Meter=String
StringAlign=Center
FontColor=0,0,0
FontFace=Segoe UI
FontSize=9
X=150
Y=165
Text=#Ping1#
AntiAlias=1
ToolTipType=1
ToolTipText=Escribe El IP y Presiona "Enter". Rango Recomendado: 10.0.20.1-5.
LeftMouseUpAction=[!PluginBang "MeterIP1 ExecuteBatch 1"]
Hidden=#HideGroup2#

[MeterCodeSelect]
Group=Pag2
Meter=String
StringAlign=Center
FontColor=0,0,0
FontFace=Segoe UI
FontSize=9
X=150
Y=185
Text=#Select#
AntiAlias=1
ToolTipType=1
ToolTipText=Escribe Internet o Ping y Presiona "Enter".
LeftMouseUpAction=[!PluginBang "MeterSelect ExecuteBatch 1"]
Hidden=#HideGroup2#

[MeterCodeIP2]
Group=Pag2
Meter=String
StringAlign=Center
FontColor=0,0,0
FontFace=Segoe UI
FontSize=9
X=150
Y=205
Text=#Ping2#
AntiAlias=1
ToolTipType=1
ToolTipText=Escribe El IP a comprobar en Internet y Presiona "Enter".
LeftMouseUpAction=[!PluginBang "MeterIP2 ExecuteBatch 1"]
Hidden=#HideGroup2#

[MeterCodeIP2C]
Group=Pag2
Meter=String
StringAlign=Center
FontColor=0,0,0
FontFace=Segoe UI
FontSize=9
X=150
Y=225
Text=#CompInter#
AntiAlias=1
ToolTipType=1
ToolTipText=Escribe el tiempo correcto y presione "Enter". Rango Recomendado: 300-1500.
LeftMouseUpAction=[!PluginBang "MeterIP2C ExecuteBatch 1"]
Hidden=#HideGroup2#

[MeterCodeIP3]
Group=Pag2
Meter=String
StringAlign=Center
FontColor=0,0,0
FontFace=Segoe UI
FontSize=9
X=150
Y=245
Text=#Ping3#
AntiAlias=1
ToolTipType=1
ToolTipText=Escribe El IP y Presiona "Enter". Rango Recomendado: 10.0.20.190-200.
LeftMouseUpAction=[!PluginBang "MeterIP3 ExecuteBatch 1"]
Hidden=#HideGroup2#

[MeterCodeIP4]
Group=Pag2
Meter=String
StringAlign=Center
FontColor=0,0,0
FontFace=Segoe UI
FontSize=9
X=150
Y=265
Text=#Ping4#
AntiAlias=1
ToolTipType=1
ToolTipText=Escribe El IP y Presiona "Enter". Rango Recomendado: 10.0.20.190-200.
LeftMouseUpAction=[!PluginBang "MeterIP4 ExecuteBatch 1"]
Hidden=#HideGroup2#

[MeterCodeIP5]
Group=Pag2
Meter=String
StringAlign=Center
FontColor=0,0,0
FontFace=Segoe UI
FontSize=9
X=150
Y=285
Text=#Ping5#
AntiAlias=1
ToolTipType=1
ToolTipText=Escribe El IP y Presiona "Enter". Rango Recomendado: 10.0.20.190-200.
LeftMouseUpAction=[!PluginBang "MeterIP5 ExecuteBatch 1"]
Hidden=#HideGroup2#

[MeterCodeIP6]
Group=Pag2
Meter=String
StringAlign=Center
FontColor=0,0,0
FontFace=Segoe UI
FontSize=9
X=150
Y=305
Text=#Ping6#
AntiAlias=1
ToolTipType=1
ToolTipText=Escribe El IP y Presiona "Enter". Rango Recomendado: 10.0.20.190-200.
LeftMouseUpAction=[!PluginBang "MeterIP6 ExecuteBatch 1"]
Hidden=#HideGroup2#

[MeterCodeIP7]
Group=Pag2
Meter=String
StringAlign=Center
FontColor=0,0,0
FontFace=Segoe UI
FontSize=9
X=150
Y=325
Text=#Ping7#
AntiAlias=1
ToolTipType=1
ToolTipText=Escribe El IP y Presiona "Enter". Rango Recomendado: 10.0.20.100-190.
LeftMouseUpAction=[!PluginBang "MeterIP7 ExecuteBatch 1"]
Hidden=#HideGroup2#

[MeterCodeIP8]
Group=Pag2
Meter=String
StringAlign=Center
FontColor=0,0,0
FontFace=Segoe UI
FontSize=9
X=150
Y=345
Text=#Ping8#
AntiAlias=1
ToolTipType=1
ToolTipText=Escribe El IP y Presiona "Enter". Rango Recomendado: 10.0.20.100-190.
LeftMouseUpAction=[!PluginBang "MeterIP8 ExecuteBatch 1"]
Hidden=#HideGroup2#

[MeterCodeIP9]
Group=Pag2
Meter=String
StringAlign=Center
FontColor=0,0,0
FontFace=Segoe UI
FontSize=9
X=150
Y=365
Text=#Ping9#
AntiAlias=1
ToolTipType=1
ToolTipText=Escribe El IP y Presiona "Enter". Rango Recomendado: 10.0.20.100-190.
LeftMouseUpAction=[!PluginBang "MeterIP9 ExecuteBatch 1"]
Hidden=#HideGroup2#

[MeterCodeR1]
Group=Pag2
Meter=String
StringAlign=Center
FontColor=0,0,0
FontFace=Segoe UI
FontSize=9
X=234
Y=70
Text=#RegFANS#
AntiAlias=1
ToolTipType=1
ToolTipText=Escribe El valor Raw y Presiona "Enter".
LeftMouseUpAction=[!PluginBang "MeterER1 ExecuteBatch 1"]
Hidden=#HideGroup2#

[MeterCodeR2]
Group=Pag2
Meter=String
StringAlign=Center
FontColor=0,0,0
FontFace=Segoe UI
FontSize=9
X=234
Y=90
Text=#RegHDDT#
AntiAlias=1
ToolTipType=1
ToolTipText=Escribe El valor Raw y Presiona "Enter".
LeftMouseUpAction=[!PluginBang "MeterER2 ExecuteBatch 1"]
Hidden=#HideGroup2#

[MeterCodeR3]
Group=Pag2
Meter=String
StringAlign=Center
FontColor=0,0,0
FontFace=Segoe UI
FontSize=9
X=359
Y=70
Text=#RegHDDU#
AntiAlias=1
ToolTipType=1
ToolTipText=Escribe El valor Raw y Presiona "Enter".
LeftMouseUpAction=[!PluginBang "MeterER3 ExecuteBatch 1"]
Hidden=#HideGroup2#

;[MeterCodeR4]
;Group=Pag2
;Meter=String
;StringAlign=Center
;FontColor=0,0,0
;FontFace=Segoe UI
;FontSize=9
;X=359
;Y=90
;Text=#RegHDDU#
;AntiAlias=1
;ToolTipType=1
;ToolTipText=Escribe El valor Raw y Presiona "Enter".
;LeftMouseUpAction=[!PluginBang "MeterER4 ExecuteBatch 1"]
;Hidden=#HideGroup2#

[MeterCodeVMaxG]
Group=Pag2
Meter=String
StringAlign=Center
FontColor=0,0,0
FontFace=Segoe UI
FontSize=9
X=234
Y=145
Text=#VMaxG#
AntiAlias=1
ToolTipType=1
ToolTipText=Escribe El valor Máximo y Presiona "Enter".
LeftMouseUpAction=[!PluginBang "MeterVMaxG ExecuteBatch 1"]
Hidden=#HideGroup2#

[MeterCodeVelG8]
Group=Pag2
Meter=String
StringAlign=Center
FontColor=0,0,0
FontFace=Segoe UI
FontSize=9
X=234
Y=165
Text=#VelG8#
AntiAlias=1
ToolTipType=1
ToolTipText=Escribe El valor Para la 8va Velocidad y Presiona "Enter".
LeftMouseUpAction=[!PluginBang "MeterVelG8 ExecuteBatch 1"]
Hidden=#HideGroup2#

[MeterCodeVelG7]
Group=Pag2
Meter=String
StringAlign=Center
FontColor=0,0,0
FontFace=Segoe UI
FontSize=9
X=234
Y=185
Text=#VelG7#
AntiAlias=1
ToolTipType=1
ToolTipText=Escribe El valor Para la 7ma Velocidad y Presiona "Enter".
LeftMouseUpAction=[!PluginBang "MeterVelG7 ExecuteBatch 1"]
Hidden=#HideGroup2#

[MeterCodeVelG6]
Group=Pag2
Meter=String
StringAlign=Center
FontColor=0,0,0
FontFace=Segoe UI
FontSize=9
X=234
Y=205
Text=#VelG6#
AntiAlias=1
ToolTipType=1
ToolTipText=Escribe El valor Para la 6ta Velocidad y Presiona "Enter".
LeftMouseUpAction=[!PluginBang "MeterVelG6 ExecuteBatch 1"]
Hidden=#HideGroup2#

[MeterCodeVelG5]
Group=Pag2
Meter=String
StringAlign=Center
FontColor=0,0,0
FontFace=Segoe UI
FontSize=9
X=234
Y=225
Text=#VelG5#
AntiAlias=1
ToolTipType=1
ToolTipText=Escribe El valor Para la 5ta Velocidad y Presiona "Enter".
LeftMouseUpAction=[!PluginBang "MeterVelG5 ExecuteBatch 1"]
Hidden=#HideGroup2#

[MeterCodeVelG4]
Group=Pag2
Meter=String
StringAlign=Center
FontColor=0,0,0
FontFace=Segoe UI
FontSize=9
X=234
Y=245
Text=#VelG4#
AntiAlias=1
ToolTipType=1
ToolTipText=Escribe El valor Para la 4ta Velocidad y Presiona "Enter".
LeftMouseUpAction=[!PluginBang "MeterVelG4 ExecuteBatch 1"]
Hidden=#HideGroup2#

[MeterCodeVelG3]
Group=Pag2
Meter=String
StringAlign=Center
FontColor=0,0,0
FontFace=Segoe UI
FontSize=9
X=234
Y=265
Text=#VelG3#
AntiAlias=1
ToolTipType=1
ToolTipText=Escribe El valor Para la 3ra Velocidad y Presiona "Enter".
LeftMouseUpAction=[!PluginBang "MeterVelG3 ExecuteBatch 1"]
Hidden=#HideGroup2#

[MeterCodeVelG2]
Group=Pag2
Meter=String
StringAlign=Center
FontColor=0,0,0
FontFace=Segoe UI
FontSize=9
X=234
Y=285
Text=#VelG2#
AntiAlias=1
ToolTipType=1
ToolTipText=Escribe El valor Para la 2da Velocidad y Presiona "Enter".
LeftMouseUpAction=[!PluginBang "MeterVelG2 ExecuteBatch 1"]
Hidden=#HideGroup2#

[MeterCodeVelG1]
Group=Pag2
Meter=String
StringAlign=Center
FontColor=0,0,0
FontFace=Segoe UI
FontSize=9
X=234
Y=305
Text=#VelG1#
AntiAlias=1
ToolTipType=1
ToolTipText=Escribe El valor Para la 1ra Velocidad y Presiona "Enter".
LeftMouseUpAction=[!PluginBang "MeterVelG1 ExecuteBatch 1"]
Hidden=#HideGroup2#

[MeterCodeVMinG]
Group=Pag2
Meter=String
StringAlign=Center
FontColor=0,0,0
FontFace=Segoe UI
FontSize=9
X=234
Y=325
Text=#VMinG#
AntiAlias=1
ToolTipType=1
ToolTipText=Escribe El valor Mínimo de Velocidad y Presiona "Enter".
LeftMouseUpAction=[!PluginBang "MeterVMinG ExecuteBatch 1"]
Hidden=#HideGroup2#

[MeterCodeDivGPU]
Group=Pag2
Meter=String
StringAlign=Center
FontColor=0,0,0
FontFace=Segoe UI
FontSize=9
X=234
Y=345
Text=#DivGPU#
AntiAlias=1
ToolTipType=1
ToolTipText=Escribe El valor Para el Divisor de Velocidad y Presiona "Enter".
LeftMouseUpAction=[!PluginBang "MeterWDivGPU ExecuteBatch 1"]
Hidden=#HideGroup2#

[MeterCodeVMaxC]
Group=Pag2
Meter=String
StringAlign=Center
FontColor=0,0,0
FontFace=Segoe UI
FontSize=9
X=359
Y=145
Text=#VMaxC#
AntiAlias=1
ToolTipType=1
ToolTipText=Escribe El valor Máximo de Velocidad y Presiona "Enter".
LeftMouseUpAction=[!PluginBang "MeterVMaxC ExecuteBatch 1"]
Hidden=#HideGroup2#

[MeterCodeVelC8]
Group=Pag2
Meter=String
StringAlign=Center
FontColor=0,0,0
FontFace=Segoe UI
FontSize=9
X=359
Y=165
Text=#VelC8#
AntiAlias=1
ToolTipType=1
ToolTipText=Escribe El valor Para la 8va Velocidad y Presiona "Enter".
LeftMouseUpAction=[!PluginBang "MeterVelC8 ExecuteBatch 1"]
Hidden=#HideGroup2#

[MeterCodeVelC7]
Group=Pag2
Meter=String
StringAlign=Center
FontColor=0,0,0
FontFace=Segoe UI
FontSize=9
X=359
Y=185
Text=#VelC7#
AntiAlias=1
ToolTipType=1
ToolTipText=Escribe El valor Para la 7ma Velocidad y Presiona "Enter".
LeftMouseUpAction=[!PluginBang "MeterVelC7 ExecuteBatch 1"]
Hidden=#HideGroup2#

[MeterCodeVelC6]
Group=Pag2
Meter=String
StringAlign=Center
FontColor=0,0,0
FontFace=Segoe UI
FontSize=9
X=359
Y=205
Text=#VelC6#
AntiAlias=1
ToolTipType=1
ToolTipText=Escribe El valor Para la 6ta Velocidad y Presiona "Enter".
LeftMouseUpAction=[!PluginBang "MeterVelC6 ExecuteBatch 1"]
Hidden=#HideGroup2#

[MeterCodeVelC5]
Group=Pag2
Meter=String
StringAlign=Center
FontColor=0,0,0
FontFace=Segoe UI
FontSize=9
X=359
Y=225
Text=#VelC5#
AntiAlias=1
ToolTipType=1
ToolTipText=Escribe El valor Para la 5ta Velocidad y Presiona "Enter".
LeftMouseUpAction=[!PluginBang "MeterVelC5 ExecuteBatch 1"]
Hidden=#HideGroup2#

[MeterCodeVelC4]
Group=Pag2
Meter=String
StringAlign=Center
FontColor=0,0,0
FontFace=Segoe UI
FontSize=9
X=359
Y=245
Text=#VelC4#
AntiAlias=1
ToolTipType=1
ToolTipText=Escribe El valor Para la 4ta Velocidad y Presiona "Enter".
LeftMouseUpAction=[!PluginBang "MeterVelC4 ExecuteBatch 1"]
Hidden=#HideGroup2#

[MeterCodeVelC3]
Group=Pag2
Meter=String
StringAlign=Center
FontColor=0,0,0
FontFace=Segoe UI
FontSize=9
X=359
Y=265
Text=#VelC3#
AntiAlias=1
ToolTipType=1
ToolTipText=Escribe El valor Para la 3ra Velocidad y Presiona "Enter".
LeftMouseUpAction=[!PluginBang "MeterVelC3 ExecuteBatch 1"]
Hidden=#HideGroup2#

[MeterCodeVelC2]
Group=Pag2
Meter=String
StringAlign=Center
FontColor=0,0,0
FontFace=Segoe UI
FontSize=9
X=359
Y=285
Text=#VelC2#
AntiAlias=1
ToolTipType=1
ToolTipText=Escribe El valor Para la 2da Velocidad y Presiona "Enter".
LeftMouseUpAction=[!PluginBang "MeterVelC2 ExecuteBatch 1"]
Hidden=#HideGroup2#

[MeterCodeVelC1]
Group=Pag2
Meter=String
StringAlign=Center
FontColor=0,0,0
FontFace=Segoe UI
FontSize=9
X=359
Y=305
Text=#VelC1#
AntiAlias=1
ToolTipType=1
ToolTipText=Escribe El valor Para la 1ra Velocidad y Presiona "Enter".
LeftMouseUpAction=[!PluginBang "MeterVelC1 ExecuteBatch 1"]
Hidden=#HideGroup2#

[MeterCodeVMinC]
Group=Pag2
Meter=String
StringAlign=Center
FontColor=0,0,0
FontFace=Segoe UI
FontSize=9
X=359
Y=325
Text=#VMinC#
AntiAlias=1
ToolTipType=1
ToolTipText=Escribe El valor Mínimo de Velocidad y Presiona "Enter".
LeftMouseUpAction=[!PluginBang "MeterVMinC ExecuteBatch 1"]
Hidden=#HideGroup2#

[MeterCodeDivCPU]
Group=Pag2
Meter=String
StringAlign=Center
FontColor=0,0,0
FontFace=Segoe UI
FontSize=9
X=359
Y=345
Text=#DivCPU#
AntiAlias=1
ToolTipType=1
ToolTipText=Escribe El valor Para el Divisor de Velocidad y Presiona "Enter".
LeftMouseUpAction=[!PluginBang "MeterWDivCPU ExecuteBatch 1"]
Hidden=#HideGroup2#

[MeterCodeMaxGDDR]
Group=Pag2
Meter=String
StringAlign=Center
FontColor=0,0,0
FontFace=Segoe UI
FontSize=9
X=359
Y=375
Text=#MaxGPU-RAM#
AntiAlias=1
ToolTipType=1
ToolTipText=Escribe El valor Para el Divisor de Velocidad y Presiona "Enter".
LeftMouseUpAction=[!PluginBang "MeterWMaxGDDR ExecuteBatch 1"]
Hidden=#HideGroup2#

[MeterCodeFS1]
Group=Pag2
Meter=String
StringAlign=Center
FontColor=0,0,0
FontFace=Segoe UI
FontSize=9
X=150
Y=420
Text=#FanSis1#
AntiAlias=1
ToolTipType=1
ToolTipText=Escribe El valor Raw y Presiona "Enter".
LeftMouseUpAction=[!PluginBang "MeterFS1 ExecuteBatch 1"]
Hidden=#HideGroup2#

[MeterCodeFS2]
Group=Pag2
Meter=String
StringAlign=Center
FontColor=0,0,0
FontFace=Segoe UI
FontSize=9
X=150
Y=440
Text=#FanSis2#
AntiAlias=1
ToolTipType=1
ToolTipText=Escribe El valor Raw y Presiona "Enter".
LeftMouseUpAction=[!PluginBang "MeterFS2 ExecuteBatch 1"]
Hidden=#HideGroup2#

[MeterCodeFS3]
Group=Pag2
Meter=String
StringAlign=Center
FontColor=0,0,0
FontFace=Segoe UI
FontSize=9
X=150
Y=460
Text=#FanSis3#
AntiAlias=1
ToolTipType=1
ToolTipText=Escribe El valor Raw y Presiona "Enter".
LeftMouseUpAction=[!PluginBang "MeterFS3 ExecuteBatch 1"]
Hidden=#HideGroup2#

;-----------------------------------------------------------
;     Grabar cada Variable Pag 2
;-----------------------------------------------------------

[MeterLines]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=9
X=119
Y=71
W=64
H=14
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables LinesBox "$UserInput$""#@#\Config\Variables.inc"][!RainmeterRefreshApp] 
DefaultValue="Líneas"

[MeterM]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=9
X=119
Y=126
W=64
H=14
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables MilisegPing "$UserInput$""#@#\Config\Variables.inc"][!RainmeterRefreshApp] 
DefaultValue="Miliseg"

[MeterT]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=9
X=119
Y=146
W=64
H=14
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables Transparent "$UserInput$""#@#\Config\Variables.inc"][!RainmeterRefreshApp] 
DefaultValue="Transp."

[MeterIP1]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=9
X=119
Y=166
W=64
H=14
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables Ping1 "$UserInput$""#@#\Config\Variables.inc"][!RainmeterRefreshApp] 
DefaultValue="IP-1"

[MeterSelect]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=9
X=119
Y=186
W=64
H=14
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables Select "$UserInput$""#@#\Config\Variables.inc"][!RainmeterRefreshApp] 
DefaultValue="Select."

[MeterIP2]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=9
X=119
Y=206
W=64
H=14
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables Ping2 "$UserInput$""#@#\Config\Variables.inc"][!RainmeterRefreshApp] 
DefaultValue="IP-2"

[MeterIP2C]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=9
X=119
Y=226
W=64
H=14
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables CompInter "$UserInput$""#@#\Config\Variables.inc"][!RainmeterRefreshApp] 
DefaultValue="Miliseg"

[MeterIP3]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=9
X=119
Y=246
W=64
H=14
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables Ping3 "$UserInput$""#@#\Config\Variables.inc"][!RainmeterRefreshApp] 
DefaultValue="IP-3"

[MeterIP4]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=9
X=119
Y=266
W=64
H=14
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables Ping4 "$UserInput$""#@#\Config\Variables.inc"][!RainmeterRefreshApp] 
DefaultValue="IP-4"

[MeterIP5]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=9
X=119
Y=286
W=64
H=14
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables Ping5 "$UserInput$""#@#\Config\Variables.inc"][!RainmeterRefreshApp] 
DefaultValue="IP-5"

[MeterIP6]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=9
X=119
Y=306
W=64
H=14
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables Ping6 "$UserInput$""#@#\Config\Variables.inc"][!RainmeterRefreshApp] 
DefaultValue="IP-6"

[MeterIP7]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=9
X=119
Y=326
W=64
H=14
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables Ping7 "$UserInput$""#@#\Config\Variables.inc"][!RainmeterRefreshApp] 
DefaultValue="IP-7"

[MeterIP8]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=9
X=119
Y=346
W=64
H=14
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables Ping8 "$UserInput$""#@#\Config\Variables.inc"][!RainmeterRefreshApp] 
DefaultValue="IP-8"

[MeterIP9]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=9
X=119
Y=366
W=64
H=14
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables Ping9 "$UserInput$""#@#\Config\Variables.inc"][!RainmeterRefreshApp] 
DefaultValue="IP-9"

[MeterER1]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=9
X=202
Y=71
W=64
H=14
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables RegFANS "$UserInput$""#@#\Config\Variables.inc"][!RainmeterRefreshApp] 
DefaultValue="V.Raw1"

[MeterER2]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=9
X=202
Y=91
W=64
H=14
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables RegHDDT "$UserInput$""#@#\Config\Variables.inc"][!RainmeterRefreshApp] 
DefaultValue="V.Raw2"

[MeterER3]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=9
X=327
Y=71
W=64
H=14
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables RegHDDU "$UserInput$""#@#\Config\Variables.inc"][!RainmeterRefreshApp] 
DefaultValue="V.Raw3"

[MeterER4]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=9
X=327
Y=91
W=64
H=14
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables ------- "$UserInput$""#@#\Config\Variables.inc"][!RainmeterRefreshApp] 
DefaultValue="V.Raw4"

[MeterVMaxG]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=9
X=202
Y=146
W=64
H=14
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables VMaxG "$UserInput$""#@#\Config\Variables.inc"][!RainmeterRefreshApp] 
DefaultValue="VMaxG"

[MeterVelG8]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=9
X=202
Y=166
W=64
H=14
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables VelG8 "$UserInput$""#@#\Config\Variables.inc"][!RainmeterRefreshApp] 
DefaultValue="VelG8"

[MeterVelG7]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=9
X=202
Y=186
W=64
H=14
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables VelG7 "$UserInput$""#@#\Config\Variables.inc"][!RainmeterRefreshApp] 
DefaultValue="VelG7"

[MeterVelG6]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=9
X=202
Y=206
W=64
H=14
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables VelG6 "$UserInput$""#@#\Config\Variables.inc"][!RainmeterRefreshApp] 
DefaultValue="VelG6"

[MeterVelG5]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=9
X=202
Y=226
W=64
H=14
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables VelG5 "$UserInput$""#@#\Config\Variables.inc"][!RainmeterRefreshApp] 
DefaultValue="VelG5"

[MeterVelG4]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=9
X=202
Y=246
W=64
H=14
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables VelG4 "$UserInput$""#@#\Config\Variables.inc"][!RainmeterRefreshApp] 
DefaultValue="VelG4"

[MeterVelG3]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=9
X=202
Y=266
W=64
H=14
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables VelG3 "$UserInput$""#@#\Config\Variables.inc"][!RainmeterRefreshApp] 
DefaultValue="VelG3"

[MeterVelG2]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=9
X=202
Y=286
W=64
H=14
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables VelG2 "$UserInput$""#@#\Config\Variables.inc"][!RainmeterRefreshApp] 
DefaultValue="VelG2"

[MeterVelG1]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=9
X=202
Y=306
W=64
H=14
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables VelG1 "$UserInput$""#@#\Config\Variables.inc"][!RainmeterRefreshApp] 
DefaultValue="VelG1"

[MeterVMinG]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=9
X=202
Y=326
W=64
H=14
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables VMinG "$UserInput$""#@#\Config\Variables.inc"][!RainmeterRefreshApp] 
DefaultValue="VMinG"

[MeterWDivGPU]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=9
X=202
Y=346
W=64
H=14
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables DivGPU "$UserInput$""#@#\Config\Variables.inc"][!RainmeterRefreshApp] 
DefaultValue="DivGPU"

[MeterVMaxC]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=9
X=327
Y=146
W=64
H=14
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables VMaxC "$UserInput$""#@#\Config\Variables.inc"][!RainmeterRefreshApp] 
DefaultValue="VMaxC"

[MeterVelC8]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=9
X=327
Y=166
W=64
H=14
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables VelC8 "$UserInput$""#@#\Config\Variables.inc"][!RainmeterRefreshApp] 
DefaultValue="VelC8"

[MeterVelC7]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=9
X=327
Y=186
W=64
H=14
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables VelC7 "$UserInput$""#@#\Config\Variables.inc"][!RainmeterRefreshApp] 
DefaultValue="VelC7"

[MeterVelC6]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=9
X=327
Y=206
W=64
H=14
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables VelC6 "$UserInput$""#@#\Config\Variables.inc"][!RainmeterRefreshApp] 
DefaultValue="VelC6"

[MeterVelC5]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=9
X=327
Y=226
W=64
H=14
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables VelC5 "$UserInput$""#@#\Config\Variables.inc"][!RainmeterRefreshApp] 
DefaultValue="VelC5"

[MeterVelC4]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=9
X=327
Y=246
W=64
H=14
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables VelC4 "$UserInput$""#@#\Config\Variables.inc"][!RainmeterRefreshApp] 
DefaultValue="VelC4"

[MeterVelC3]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=9
X=327
Y=266
W=64
H=14
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables VelC3 "$UserInput$""#@#\Config\Variables.inc"][!RainmeterRefreshApp] 
DefaultValue="VelC3"

[MeterVelC2]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=9
X=327
Y=286
W=64
H=14
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables VelC2 "$UserInput$""#@#\Config\Variables.inc"][!RainmeterRefreshApp] 
DefaultValue="VelC2"

[MeterVelC1]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=9
X=327
Y=306
W=64
H=14
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables VelC1 "$UserInput$""#@#\Config\Variables.inc"][!RainmeterRefreshApp] 
DefaultValue="VelC1"

[MeterVMinC]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=9
X=327
Y=326
W=64
H=14
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables VMinC "$UserInput$""#@#\Config\Variables.inc"][!RainmeterRefreshApp] 
DefaultValue="VMinC"

[MeterWDivCPU]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=9
X=327
Y=346
W=64
H=14
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables DivCPU "$UserInput$""#@#\Config\Variables.inc"][!RainmeterRefreshApp] 
DefaultValue="DivCPU"

[MeterWMaxGDDR]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=9
X=327
Y=376
W=64
H=14
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables MaxGPU-RAM "$UserInput$""#@#\Config\Variables.inc"][!RainmeterRefreshApp] 
DefaultValue="MaxGDDR"

[MeterFS1]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=9
X=119
Y=421
W=64
H=14
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables FanSis1 "$UserInput$""#@#\Config\Variables.inc"][!RainmeterRefreshApp] 
DefaultValue="FS-1"

[MeterFS2]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=9
X=119
Y=441
W=64
H=14
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables FanSis2 "$UserInput$""#@#\Config\Variables.inc"][!RainmeterRefreshApp] 
DefaultValue="FS-2"

[MeterFS3]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=9
X=119
Y=461
W=64
H=14
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables FanSis3 "$UserInput$""#@#\Config\Variables.inc"][!RainmeterRefreshApp] 
DefaultValue="FS-3"

;-----------------------------------------------------------
;     Iconos y Variables de Colores Pag 2
;-----------------------------------------------------------

[ColorFGPU]
Group=Pag2
Meter = Image
ImageName = #@#\Images\Fan\FanBladeS_invert.png
ImageTint = #ColorFGPU#
x = 440
y = 48
LeftMouseDownAction = [!ShowMeter WarningInput][!HideMeter ResetColor][!SetOption TypeboxColor ImageTint #ColorFGPU#][!SetOption InputColor DefaultValue #ColorFGPU#][!SetOption InputColor Command1 "[!WriteKeyValue Variables ColorFGPU $UserInput$ #@#\Config\Styles.inc]"][!ShowMeter TypeboxColor][!PluginBang "MeterInputFGPU ExecuteBatch 1"]
ToolTipType=1
ToolTipText=Fan GPU
Hidden=#HideGroup2#

[ColorFCPU]
Group=Pag2
Meter = Image
ImageName = #@#\Images\Fan\FanBladeS.png
ImageTint = #ColorFCPU#
x = 150r
y = 48
LeftMouseDownAction = [!ShowMeter WarningInput][!HideMeter ResetColor][!SetOption TypeboxColor ImageTint #ColorFCPU#][!SetOption InputColor DefaultValue #ColorFCPU#][!SetOption InputColor Command1 "[!WriteKeyValue Variables ColorFCPU $UserInput$ #@#\Config\Styles.inc]"][!ShowMeter TypeboxColor][!PluginBang "MeterInputFCPU ExecuteBatch 1"]
ToolTipType=1
ToolTipText=Fan CPU
Hidden=#HideGroup2#

[ColorBG]
Group=Pag2
Meter = Image
ImageName = #@#\Images\Settings\Button.png
ImageTint = #BackgColor#
x = 440
y = 170
LeftMouseDownAction = [!ShowMeter WarningInput][!HideMeter ResetColor][!SetOption TypeboxColor ImageTint #BackgColor#][!SetOption InputColor DefaultValue #BackgColor#][!SetOption InputColor Command1 "[!WriteKeyValue Variables BackgColor $UserInput$ #@#\Config\Styles.inc]"][!ShowMeter TypeboxColor][!PluginBang "MeterInputBG ExecuteBatch 1"]
ToolTipType=1
ToolTipText=Fondo
Hidden=#HideGroup2#

[ColorG1]
Group=Pag2
Meter = Image
ImageName = #@#\Images\Settings\Button.png
ImageTint = #ColorLine1#
x = 485
y = 170
LeftMouseDownAction = [!ShowMeter WarningInput][!HideMeter ResetColor][!SetOption TypeboxColor ImageTint #ColorLine1#][!SetOption InputColor DefaultValue #ColorLine1#][!SetOption InputColor Command1 "[!WriteKeyValue Variables ColorLine1 $UserInput$ #@#\Config\Styles.inc]"][!ShowMeter TypeboxColor][!PluginBang "MeterInputG1 ExecuteBatch 1"]
ToolTipType=1
ToolTipText=Línea Standar
Hidden=#HideGroup2#

[ColorG2]
Group=Pag2
Meter = Image
ImageName = #@#\Images\Settings\Button.png
ImageTint = #ColorLine2#
x = 530
y = 170
LeftMouseDownAction = [!ShowMeter WarningInput][!HideMeter ResetColor][!SetOption TypeboxColor ImageTint #ColorLine2#][!SetOption InputColor DefaultValue #ColorLine2#][!SetOption InputColor Command1 "[!WriteKeyValue Variables ColorLine2 $UserInput$ #@#\Config\Styles.inc]"][!ShowMeter TypeboxColor][!PluginBang "MeterInputG2 ExecuteBatch 1"]
ToolTipType=1
ToolTipText=Línea Secundaria
Hidden=#HideGroup2#

[ColorG3]
Group=Pag2
Meter = Image
ImageName = #@#\Images\Settings\Button.png
ImageTint = #ColorLine3#
x = 575
y = 170
LeftMouseDownAction = [!ShowMeter WarningInput][!HideMeter ResetColor][!SetOption TypeboxColor ImageTint #ColorLine3#][!SetOption InputColor DefaultValue #ColorLine3#][!SetOption InputColor Command1 "[!WriteKeyValue Variables ColorLine3 $UserInput$ #@#\Config\Styles.inc]"][!ShowMeter TypeboxColor][!PluginBang "MeterInputG3 ExecuteBatch 1"]
ToolTipType=1
ToolTipText=Fan 1 Sys.
Hidden=#HideGroup2#

[ColorG4]
Group=Pag2
Meter = Image
ImageName = #@#\Images\Settings\Button.png
ImageTint = #ColorLine4#
x = 620
y = 170
LeftMouseDownAction = [!ShowMeter WarningInput][!HideMeter ResetColor][!SetOption TypeboxColor ImageTint #ColorLine4#][!SetOption InputColor DefaultValue #ColorLine4#][!SetOption InputColor Command1 "[!WriteKeyValue Variables ColorLine4 $UserInput$ #@#\Config\Styles.inc]"][!ShowMeter TypeboxColor][!PluginBang "MeterInputG4 ExecuteBatch 1"]
ToolTipType=1
ToolTipText=Fan 2 Sys.
Hidden=#HideGroup2#

[ColorG5]
Group=Pag2
Meter = Image
ImageName = #@#\Images\Settings\Button.png
ImageTint = #ColorLine5#
x = 665
y = 170
LeftMouseDownAction = [!ShowMeter WarningInput][!HideMeter ResetColor][!SetOption TypeboxColor ImageTint #ColorLine5#][!SetOption InputColor DefaultValue #ColorLine5#][!SetOption InputColor Command1 "[!WriteKeyValue Variables ColorLine5 $UserInput$ #@#\Config\Styles.inc]"][!ShowMeter TypeboxColor][!PluginBang "MeterInputG5 ExecuteBatch 1"]
ToolTipType=1
ToolTipText=Fan 3 Sys.
Hidden=#HideGroup2#

[ColorVenusAtmB]
Group=Pag2
Meter = Image
ImageName = #@#\Images\Settings\Button.png
ImageTint = #ColorVenusAtm#
x = 440
y = 208
LeftMouseDownAction = [!ShowMeter WarningInput][!HideMeter ResetColor][!SetOption TypeboxColor ImageTint #ColorVenusAtm#][!SetOption InputColor DefaultValue #ColorVenusAtm#][!SetOption InputColor Command1 "[!WriteKeyValue Variables ColorVenusAtm $UserInput$ #@#\Config\Styles.inc]"][!ShowMeter TypeboxColor][!PluginBang "MeterInputVenusAtm ExecuteBatch 1"]
ToolTipType=1
ToolTipText=Atmófera
Hidden=#HideGroup2#

[ColorVenusPlaB]
Group=Pag2
Meter = Image
ImageName = #@#\Images\Settings\Button.png
ImageTint = #ColorVenusPla#
x = 485
y = 208
LeftMouseDownAction = [!ShowMeter WarningInput][!HideMeter ResetColor][!SetOption TypeboxColor ImageTint #ColorVenusPla#][!SetOption InputColor DefaultValue #ColorVenusPla#][!SetOption InputColor Command1 "[!WriteKeyValue Variables ColorVenusPla $UserInput$ #@#\Config\Styles.inc]"][!ShowMeter TypeboxColor][!PluginBang "MeterInputVenusPla ExecuteBatch 1"]
ToolTipType=1
ToolTipText=Cuerpo
Hidden=#HideGroup2#

[ColorTierraAtmB]
Group=Pag2
Meter = Image
ImageName = #@#\Images\Settings\Button.png
ImageTint = #ColorTierraAtm#
x = 530
y = 208
LeftMouseDownAction = [!ShowMeter WarningInput][!HideMeter ResetColor][!SetOption TypeboxColor ImageTint #ColorTierraAtm#][!SetOption InputColor DefaultValue #ColorTierraAtm#][!SetOption InputColor Command1 "[!WriteKeyValue Variables ColorTierraAtm $UserInput$ #@#\Config\Styles.inc]"][!ShowMeter TypeboxColor][!PluginBang "MeterInputTierraAtm ExecuteBatch 1"]
ToolTipType=1
ToolTipText=Atmófera
Hidden=#HideGroup2#

[ColorLaberAtmB]
Group=Pag2
Meter = Image
ImageName = #@#\Images\Settings\Button.png
ImageTint = #ColorLaberAtm#
x = 575
y = 208
LeftMouseDownAction = [!ShowMeter WarningInput][!HideMeter ResetColor][!SetOption TypeboxColor ImageTint #ColorLaberAtm#][!SetOption InputColor DefaultValue #ColorLaberAtm#][!SetOption InputColor Command1 "[!WriteKeyValue Variables ColorLaberAtm $UserInput$ #@#\Config\Styles.inc]"][!ShowMeter TypeboxColor][!PluginBang "MeterInputLaberAtm ExecuteBatch 1"]
ToolTipType=1
ToolTipText=Atmófera
Hidden=#HideGroup2#

[ColorLaberPlaB]
Group=Pag2
Meter = Image
ImageName = #@#\Images\Settings\Button.png
ImageTint = #ColorLaberPla#
x = 620
y = 208
LeftMouseDownAction = [!ShowMeter WarningInput][!HideMeter ResetColor][!SetOption TypeboxColor ImageTint #ColorLaberPla#][!SetOption InputColor DefaultValue #ColorLaberPla#][!SetOption InputColor Command1 "[!WriteKeyValue Variables ColorLaberPla $UserInput$ #@#\Config\Styles.inc]"][!ShowMeter TypeboxColor][!PluginBang "MeterInputLaberPla ExecuteBatch 1"]
ToolTipType=1
ToolTipText=Cuerpo
Hidden=#HideGroup2#

[ColorMarteAtmB]
Group=Pag2
Meter = Image
ImageName = #@#\Images\Settings\Button.png
ImageTint = #ColorMarteAtm#
x = 665
y = 208
LeftMouseDownAction = [!ShowMeter WarningInput][!HideMeter ResetColor][!SetOption TypeboxColor ImageTint #ColorMarteAtm#][!SetOption InputColor DefaultValue #ColorMarteAtm#][!SetOption InputColor Command1 "[!WriteKeyValue Variables ColorLaberPla $UserInput$ #@#\Config\Styles.inc]"][!ShowMeter TypeboxColor][!PluginBang "MeterInputMarteAtm ExecuteBatch 1"]
ToolTipType=1
ToolTipText=Atmófera
Hidden=#HideGroup2#

[ColorBrillosAtmB]
Group=Pag2
Meter = Image
ImageName = #@#\Images\Settings\Button.png
ImageTint = #ColorBrillosAtm#
x = 439
y = 246
LeftMouseDownAction = [!ShowMeter WarningInput][!HideMeter ResetColor][!SetOption TypeboxColor ImageTint #ColorBrillosAtm#][!SetOption InputColor DefaultValue #ColorBrillosAtm#][!SetOption InputColor Command1 "[!WriteKeyValue Variables ColorBrillosAtm $UserInput$ #@#\Config\Styles.inc]"][!ShowMeter TypeboxColor][!PluginBang "MeterInputBrillosAtm ExecuteBatch 1"]
ToolTipType=1
ToolTipText=Atmófera
Hidden=#HideGroup2#

[ColorBrillosPlaB]
Group=Pag2
Meter = Image
ImageName = #@#\Images\Settings\Button.png
ImageTint = #ColorBrillosPla#
x = 484
y = 246
LeftMouseDownAction = [!ShowMeter WarningInput][!HideMeter ResetColor][!SetOption TypeboxColor ImageTint #ColorBrillosPla#][!SetOption InputColor DefaultValue #ColorBrillosPla#][!SetOption InputColor Command1 "[!WriteKeyValue Variables ColorBrillosPla $UserInput$ #@#\Config\Styles.inc]"][!ShowMeter TypeboxColor][!PluginBang "MeterInputBrillosPla ExecuteBatch 1"]
ToolTipType=1
ToolTipText=Cuerpo
Hidden=#HideGroup2#

[ColorLunaAtmB]
Group=Pag2
Meter = Image
ImageName = #@#\Images\Settings\Button.png
ImageTint = #ColorLunaAtm#
x = 529
y = 246
LeftMouseDownAction = [!ShowMeter WarningInput][!HideMeter ResetColor][!SetOption TypeboxColor ImageTint #ColorLunaAtm#][!SetOption InputColor DefaultValue #ColorLunaAtm#][!SetOption InputColor Command1 "[!WriteKeyValue Variables ColorLunaAtm $UserInput$ #@#\Config\Styles.inc]"][!ShowMeter TypeboxColor][!PluginBang "MeterInputLunaAtm ExecuteBatch 1"]
ToolTipType=1
ToolTipText=Atmófera
Hidden=#HideGroup2#

[ColorLunaPlaB]
Group=Pag2
Meter = Image
ImageName = #@#\Images\Settings\Button.png
ImageTint = #ColorLunaPla#
x = 574
y = 246
LeftMouseDownAction = [!ShowMeter WarningInput][!HideMeter ResetColor][!SetOption TypeboxColor ImageTint #ColorLunaPla#][!SetOption InputColor DefaultValue #ColorLunaPla#][!SetOption InputColor Command1 "[!WriteKeyValue Variables ColorLunaPla $UserInput$ #@#\Config\Styles.inc]"][!ShowMeter TypeboxColor][!PluginBang "MeterInputLunaPla ExecuteBatch 1"]
ToolTipType=1
ToolTipText=Cuerpo
Hidden=#HideGroup2#

[ColorSolPlaB]
Group=Pag2
Meter = Image
ImageName = #@#\Images\Settings\Button.png
ImageTint = #ColorSolPla#
x = 619
y = 246
LeftMouseDownAction = [!ShowMeter WarningInput][!HideMeter ResetColor][!SetOption TypeboxColor ImageTint #ColorSolPla#][!SetOption InputColor DefaultValue #ColorSolPla#][!SetOption InputColor Command1 "[!WriteKeyValue Variables ColorSolPla $UserInput$ #@#\Config\Styles.inc]"][!ShowMeter TypeboxColor][!PluginBang "MeterInputSolPla ExecuteBatch 1"]
ToolTipType=1
ToolTipText=Cuerpo
Hidden=#HideGroup2#

;-----------------------------------------------------------
;     Escribir Valores de Colores Pag 2
;-----------------------------------------------------------

[MeterInputFGPU]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=10
X=518
Y=432
W=95
H=15
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables ColorFGPU "$UserInput$""#@#\Config\Styles.inc"][!RainmeterRefreshApp] 
DefaultValue=""

[MeterInputFCPU]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=10
X=518
Y=432
W=95
H=15
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables ColorFCPU "$UserInput$""#@#\Config\Styles.inc"][!RainmeterRefreshApp] 
DefaultValue=""

[MeterInputBG]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=10
X=518
Y=432
W=95
H=15
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables BackgColor "$UserInput$""#@#\Config\Styles.inc"][!RainmeterRefreshApp] 
DefaultValue=""

[MeterInputG1]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=10
X=518
Y=432
W=95
H=15
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables ColorLine1 "$UserInput$""#@#\Config\Styles.inc"][!RainmeterRefreshApp] 
DefaultValue=""

[MeterInputG2]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=10
X=518
Y=432
W=95
H=15
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables ColorLine2 "$UserInput$""#@#\Config\Styles.inc"][!RainmeterRefreshApp] 
DefaultValue=""

[MeterInputG3]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=10
X=518
Y=432
W=95
H=15
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables ColorLine3 "$UserInput$""#@#\Config\Styles.inc"][!RainmeterRefreshApp] 
DefaultValue=""

[MeterInputG4]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=10
X=518
Y=432
W=95
H=15
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables ColorLine4 "$UserInput$""#@#\Config\Styles.inc"][!RainmeterRefreshApp] 
DefaultValue=""

[MeterInputG5]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=10
X=518
Y=432
W=95
H=15
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables ColorLine5 "$UserInput$""#@#\Config\Styles.inc"][!RainmeterRefreshApp] 
DefaultValue=""

[MeterInputVenusAtm]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=10
X=518
Y=432
W=95
H=15
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables ColorVenusAtm "$UserInput$""#@#\Config\Styles.inc"][!RainmeterRefreshApp] 
DefaultValue=""

[MeterInputVenusPla]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=10
X=518
Y=432
W=95
H=15
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables ColorVenusPla "$UserInput$""#@#\Config\Styles.inc"][!RainmeterRefreshApp] 
DefaultValue=""

[MeterInputTierraAtm]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=10
X=518
Y=432
W=95
H=15
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables ColorTierraAtm "$UserInput$""#@#\Config\Styles.inc"][!RainmeterRefreshApp] 
DefaultValue=""

[MeterInputLaberAtm]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=10
X=518
Y=432
W=95
H=15
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables ColorLaberAtm "$UserInput$""#@#\Config\Styles.inc"][!RainmeterRefreshApp] 
DefaultValue=""

[MeterInputLaberPla]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=10
X=518
Y=432
W=95
H=15
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables ColorLaberPla "$UserInput$""#@#\Config\Styles.inc"][!RainmeterRefreshApp] 
DefaultValue=""

[MeterInputMarteAtm]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=10
X=518
Y=432
W=95
H=15
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables ColorMarteAtm "$UserInput$""#@#\Config\Styles.inc"][!RainmeterRefreshApp] 
DefaultValue=""

[MeterInputBrillosAtm]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=10
X=518
Y=432
W=95
H=15
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables ColorBrillosAtm "$UserInput$""#@#\Config\Styles.inc"][!RainmeterRefreshApp] 
DefaultValue=""

[MeterInputBrillosPla]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=10
X=518
Y=432
W=95
H=15
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables ColorBrillosPla "$UserInput$""#@#\Config\Styles.inc"][!RainmeterRefreshApp] 
DefaultValue=""

[MeterInputLunaAtm]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=10
X=518
Y=432
W=95
H=15
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables ColorLunaAtm "$UserInput$""#@#\Config\Styles.inc"][!RainmeterRefreshApp] 
DefaultValue=""

[MeterInputLunaPla]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=10
X=518
Y=432
W=95
H=15
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables ColorLunaPla "$UserInput$""#@#\Config\Styles.inc"][!RainmeterRefreshApp] 
DefaultValue=""

[MeterInputSolPla]
Measure=Plugin
Plugin=InputText.dll
StringAlign=Center
FontFace=Segoe UI
FontSize=10
X=518
Y=432
W=95
H=15
FocusDismiss=1
AntiAlias=1
Command1=[!WriteKeyValue Variables ColorSolPla "$UserInput$""#@#\Config\Styles.inc"][!RainmeterRefreshApp] 
DefaultValue=""

;-----------------------------------------------------------
;     Resetear Colores Pag 2
;-----------------------------------------------------------

[ResetColor]
Group=Pag2
Meter=Image
ImageName=#@#\Images\Settings\resetcolors.png
x=518
y=430
W=95
H=20
LeftMouseDownAction=[!WriteKeyValue Variables ColorFCPU "#DColorFCPU#""#@#\Config\Styles.inc"][!WriteKeyValue Variables ColorFGPU "#DColorFGPU#""#@#\Config\Styles.inc"][!WriteKeyValue Variables BackgColor "#DBackgColor#""#@#\Config\Styles.inc"][!WriteKeyValue Variables ColorLine1 "#DColorLine1#""#@#\Config\Styles.inc"][!WriteKeyValue Variables ColorLine2 "#DColorLine2#""#@#\Config\Styles.inc"][!WriteKeyValue Variables ColorLine3 "#DColorLine3#""#@#\Config\Styles.inc"][!WriteKeyValue Variables ColorLine4 "#DColorLine4#""#@#\Config\Styles.inc"][!WriteKeyValue Variables ColorLine5 "#DColorLine5#""#@#\Config\Styles.inc"][!WriteKeyValue Variables ColorVenusAtm "#DColorVenusAtm#""#@#\Config\Styles.inc"][!WriteKeyValue Variables ColorVenusPla "#DColorVenusPla#""#@#\Config\Styles.inc"][!WriteKeyValue Variables ColorTierraAtm "#DColorTierraAtm#""#@#\Config\Styles.inc"][!WriteKeyValue Variables ColorLaberAtm "#DColorLaberAtm#""#@#\Config\Styles.inc"][!WriteKeyValue Variables ColorLaberPla "#DColorLaberPla#""#@#\Config\Styles.inc"][!WriteKeyValue Variables ColorMarteAtm "#DColorMarteAtm#""#@#\Config\Styles.inc"][!WriteKeyValue Variables ColorBrillosAtm "#DColorBrillosAtm#""#@#\Config\Styles.inc"][!WriteKeyValue Variables ColorBrillosPla "#DColorBrillosPla#""#@#\Config\Styles.inc"][!WriteKeyValue Variables ColorLunaAtm "#DColorLunaAtm#""#@#\Config\Styles.inc"][!WriteKeyValue Variables ColorLunaPla "#DColorLunaPla#""#@#\Config\Styles.inc"][!WriteKeyValue Variables ColorSolPla "#DColorSolPla#""#@#\Config\Styles.inc"][!Refresh][!RainmeterRefreshApp]
MouseOverAction=[!SetOption ResetColor ImageTint 182,70,70]
MouseLeaveAction=[!SetOption ResetColor ImageTint 255,255,255]
Hidden=#HideGroup2#

;-----------------------------------------------------------
;     Resetear Configuración Pag 2
;-----------------------------------------------------------

[ResetConfig]
Group=Pag2
Meter=Image
ImageName=#@#\Images\Settings\resetconfig.png
x=240
y=430
W=95
H=20
LeftMouseDownAction=[!WriteKeyValue Variables LinesBox "#DLinesBox#""#@#\Config\Variables.inc"][!WriteKeyValue Variables VMaxC "#DVMaxC#""#@#\Config\Variables.inc"][!WriteKeyValue Variables VelC8 "#DVelC8#""#@#\Config\Variables.inc"][!WriteKeyValue Variables VelC7 "#DVelC7#""#@#\Config\Variables.inc"][!WriteKeyValue Variables VelC6 "#DVelC6#""#@#\Config\Variables.inc"][!WriteKeyValue Variables VelC5 "#DVelC5#""#@#\Config\Variables.inc"][!WriteKeyValue Variables VelC4 "#DVelC4#""#@#\Config\Variables.inc"][!WriteKeyValue Variables VelC3 "#DVelC3#""#@#\Config\Variables.inc"][!WriteKeyValue Variables VelC2 "#DVelC2#""#@#\Config\Variables.inc"][!WriteKeyValue Variables VelC1 "#DVelC1#""#@#\Config\Variables.inc"][!WriteKeyValue Variables VMinC "#DVMinC#""#@#\Config\Variables.inc"][!WriteKeyValue Variables DivCPU "#DDivCPU#""#@#\Config\Variables.inc"][!WriteKeyValue Variables VMaxG "#DVMaxG#""#@#\Config\Variables.inc"][!WriteKeyValue Variables VelG8 "#DVelG8#""#@#\Config\Variables.inc"][!WriteKeyValue Variables VelG7 "#DVelG7#""#@#\Config\Variables.inc"][!WriteKeyValue Variables VelG6 "#DVelG6#""#@#\Config\Variables.inc"][!WriteKeyValue Variables VelG5 "#DVelG5#""#@#\Config\Variables.inc"][!WriteKeyValue Variables VelG4 "#DVelG4#""#@#\Config\Variables.inc"][!WriteKeyValue Variables VelG3 "#DVelG3#""#@#\Config\Variables.inc"][!WriteKeyValue Variables VelG2 "#DVelG2#""#@#\Config\Variables.inc"][!WriteKeyValue Variables VelG1 "#DVelG1#""#@#\Config\Variables.inc"][!WriteKeyValue Variables VMinG "#DVMinG#""#@#\Config\Variables.inc"][!WriteKeyValue Variables DivGPU "#DDivGPU#""#@#\Config\Variables.inc"][!WriteKeyValue Variables MilisegPing "#DMilisegPing#""#@#\Config\Variables.inc"][!WriteKeyValue Variables Transparent "#DTransparent#""#@#\Config\Variables.inc"][!WriteKeyValue Variables Ping1 "#DPing1#""#@#\Config\Variables.inc"][!WriteKeyValue Variables Select "#DSelect#""#@#\Config\Variables.inc"][!WriteKeyValue Variables Ping2 "#DPing2#""#@#\Config\Variables.inc"][!WriteKeyValue Variables CompInter "#DCompInter#""#@#\Config\Variables.inc"][!WriteKeyValue Variables Ping3 "#DPing3#""#@#\Config\Variables.inc"][!WriteKeyValue Variables Ping4 "#DPing4#""#@#\Config\Variables.inc"][!WriteKeyValue Variables Ping5 "#DPing5#""#@#\Config\Variables.inc"][!WriteKeyValue Variables Ping6 "#DPing6#""#@#\Config\Variables.inc"][!WriteKeyValue Variables Ping7 "#DPing7#""#@#\Config\Variables.inc"][!WriteKeyValue Variables Ping8 "#DPing8#""#@#\Config\Variables.inc"][!WriteKeyValue Variables Ping9 "#DPing9#""#@#\Config\Variables.inc"][!WriteKeyValue Variables RegFANS "#DRegFANS#""#@#\Config\Variables.inc"][!WriteKeyValue Variables FanSis1 "#DFanSis1#""#@#\Config\Variables.inc"][!WriteKeyValue Variables FanSis2 "#DFanSis2#""#@#\Config\Variables.inc"][!WriteKeyValue Variables FanSis3 "#DFanSis3#""#@#\Config\Variables.inc"][!WriteKeyValue Variables RegHDDT "#DRegHDDT#""#@#\Config\Variables.inc"][!WriteKeyValue Variables RegHDDU "#DRegHDDU#""#@#\Config\Variables.inc"][!WriteKeyValue Variables MaxGPU-RAM "#DMaxGPU-RAM#""#@#\Config\Variables.inc"][!Refresh][!RainmeterRefreshApp]
MouseOverAction=[!SetOption ResetConfig ImageTint 182,70,70]
MouseLeaveAction=[!SetOption ResetConfig ImageTint 255,255,255]
Hidden=#HideGroup2#

;-----------------------------------------------------------
;     Boton de escritura de los Colores
;-----------------------------------------------------------

[TypeboxColor]
Meter = Image
ImageName = #@#\Images\Settings\typebox2.png
x = 517
y = 430
W=98
H=19
Hidden = 1

[InputColor]
Measure = Plugin
Plugin = InputText
SolidColor = ffffff
FontFace = Roboto
FontSize = 10
FontColor = 5e5e5e
AntiAlias = 1
x = 518
y = 430
w = 61
h = 17
InputLimit = 6
Command2 = [!Refresh][!RainmeterRefreshApp]
OnDismissAction = [!HideMeter TypeboxColor][!HideMeter WarningInput][!ShowMeter ResetColor]

[InputColor2]
Measure = Plugin
Plugin = InputText
SolidColor = ffffff
FontFace = Roboto
FontSize = 10
FontColor = 5e5e5e
AntiAlias = 1
x = 240
y = 430
w = 61
h = 17
;InputLimit = 6

[WarningInput]
Meter = Image
ImageName = #@#\Images\Settings\enterwarning.png
x = 497
y = 455
Hidden = 1

;-----------------------------------------------------------
;     Comprobación estado Activo de las Pieles
;-----------------------------------------------------------

[MeasureActive1]
Group=Comp
Measure=Plugin
Plugin=ConfigActive
ConfigName=#Config1#
DynamicVariables=1
IfCondition=(MeasureActive1 = 1) && (#Pagina# = 2)
IfTrueAction=[!ShowMeter ColorLunaAtmB][!ShowMeter ColorLunaPlaB][!ShowMeter MeterNombre45][!UpdateMeter *][!Redraw]
IfFalseAction=[!HideMeter ColorLunaAtmB][!HideMeter ColorLunaPlaB][!HideMeter MeterNombre45][!UpdateMeter *][!Redraw]

[MeasureActive2]
Group=Comp
Measure=Plugin
Plugin=ConfigActive
ConfigName=#Config2#
DynamicVariables=1
IfCondition=(MeasureActive2 = 1) && (#Pagina# = 2)
IfTrueAction=[!ShowMeter ColorSolPlaB][!ShowMeter MeterNombre46][!UpdateMeter *][!Redraw]
IfFalseAction=[!HideMeter ColorSolPlaB][!HideMeter MeterNombre46][!UpdateMeter *][!Redraw]

[MeasureActive3]
Group=Comp
Measure=Plugin
Plugin=ConfigActive
ConfigName=#Config3#
DynamicVariables=1
IfCondition=(MeasureActive3 = 1) && (#Pagina# = 2)
IfTrueAction=[!ShowMeter ColorG3][!ShowMeter ColorG4][!ShowMeter ColorG5][!UpdateMeter *][!Redraw]
IfFalseAction=[!HideMeter ColorG3][!HideMeter ColorG4][!HideMeter ColorG5][!UpdateMeter *][!Redraw]

Good, just wanted to ask you that. I'll take a look and see where the issue might be, cause otherwise the suggested approach should make perfect sense and work flawlessly.

Help to assemble a formula

Re: Help to assemble a formula

Re: Help to assemble a formula

Re: Help to assemble a formula

Re: Help to assemble a formula

Re: Help to assemble a formula

Re: Help to assemble a formula

Re: Help to assemble a formula

Re: Help to assemble a formula

Re: Help to assemble a formula

Re: Help to assemble a formula