Bitmap usage for clock?

Seahorse · Post by **Seahorse** » April 20th, 2011, 11:42 am

I want to create a graphical clock and so I have been reading through the Bitmap section to see if this was possible, yes I know about Analogue Clocks, but that isn't what I am trying to create - or if it is, I cannot see how to employ this to create what I see in my mind's eye.

Essentially I want an image to be added each hour until 12 then remove all, 60 images for minutes, however if I understand the bitmap section I would need 12 x 60 = 720 so seconds would seem like way to much effort showing something like 43200.

That said, If I reused the hours, minute and seconds images, I would need 3, and a method to rotate them (unless of course the analogue clock can support shapes other than lines and leave a persistent item up for x hour or minutes).

To illustrate what my intention is I provide you the this (horrible) image which shows 5 past 3; 3 solid hours, and 9 hollow ones =3 O'clock - 5 solid minutes and 55 hollow (OK there's NOT 55 hollow ones, I got bored drawing the 55 empty ones but you get the idea) =5 past.

Clock.jpg

What I need to know is am I trying to do something that CAN be done with Rainmeter and if so what is the most sensible way to go about achieving this? I assume I am (as always) trying to do something the hard way having failed to understand the example/tutorials.

Post by **Chewtoy** » April 20th, 2011, 12:00 pm

So, what you are looking for is really Bars for the hours that fills with the minutes?
And then you want 60 images that show up when the minute is right?

Sound to me like you only need bars and images. And an almost massive amount of calcs.
For the images you really only need 2 (if every minute is supposed to look the same). One that is empty and one that is full. Then just reuse them.
For the bars, take a look at this: http://customize.org/rainmeter/skins/74361

Seahorse · Post by **Seahorse** » April 20th, 2011, 2:35 pm

Not exactly, but the background from the clock you linked seems to suggest a way forward; use an image for the empty hours and minutes, then pop the hours and minutes over the top. Yes, all hourse minues the same, just rotated.

Just to clarify, at midnight there would be nothing showing at all, at 0030 hours the hour is still empty by 30 minute marks are up. At 0100 there appears the first hour block and all the minute shapes vanish and begin again.

I'm going to re-read the Imageslice thread and see if that might be (mis)employed...

Post by **Chewtoy** » April 20th, 2011, 3:11 pm

Seahorse wrote:Just to clarify, at midnight there would be nothing showing at all, at 0030 hours the hour is still empty by 30 minute marks are up. At 0100 there appears the first hour block and all the minute shapes vanish and begin again.

Ah. That's actually a lot more simple.
Have 4 images, 2 for the hours and 2 for the minutes, one empty and one full.
Place everything at the right place, hide every 'filled image'.
Have some if's that show the hidden images based on the time. I would suggest using Lua for this as it is so much easier to write the ifs in.

Seahorse · Post by **Seahorse** » April 22nd, 2011, 9:29 am

I'm still getting my head around Rainmeter, a quick look at the Lua pages suggest my head might explode. I think this idea will go on the back burner for now.

Seahorse · Post by **Seahorse** » April 24th, 2011, 3:44 pm

I found something that seems to do what I want - This skin called Casual does something similar to what I want with 11 frames (x2) for memory/swap using:

Now I figure if I use 12 frames instead of 11 this would work with hours & 5 minutes blocks, or more with more frames.

So to test this I figure just see if I can get it going with an 11 hour day before trying to figure out how to make a pie drawing with 12 slices

so I assume that I use the time measure with:

%I - Hour in 12-hour format (01 - 12)
%M - Minute as decimal number (00 - 59)

What I don't understand is the difference between what values PhysicalMemory & SwapMemory return that is different to Time and what I need to do to that output to "drive" the Meter.

This is what I have used and I get a clock that suggests it is almost midnight:

Presently I get both meters totally full, which I take to mean the numbers are in excess of 11 and 59, I'd appreciate any suggestions please. I assume they need a calc performed on the measure ouput so that the meter can scale correctly, no idea where to go from this point at present.

Post by **smurfier** » April 24th, 2011, 6:10 pm

Just for fun, I made a clock similar to your original doodle using Roundlines.

1:05pm

Code: Select all

[Rainmeter]
Author=Smurfier
Update=1000
BackgroundMode=2
SolidColor=0,0,0,1

[Variables]
Hour1Length=15
Hour1Start=5
Hour2Length=27
Hour2Start=17
HourAngle=(1/18)
HourSpace=((2*PI)*(1/12))
MinuteLength=34
MinuteStart=29
MinuteAngle=(1/90)
MinuteSpace=((2*PI)*(1/59))
SecondLength=37
SecondStart=36
Color=255,255,255,255

[msHour]
Measure=Time
Format=%H

[msMinute]
Measure=Time
Format=%M

[msSecond]
Measure=Time
Format=%S

[cHour1]
Measure=Calc
Formula=#HourAngle#

[cAngle1]
Measure=Calc
Formula=-PI/2

[mHour1]
Meter=Roundline
MeasureName=cHour1
StartAngle=[cAngle1]
H=(#SecondLength#*2)
W=(#SecondLength#*2)
Solid=1
LineLength=#Hour1Length#
LineStart=#Hour1Start#
AntiAlias=1
LineColor=#Color#
DynamicVariables=1

[cHour2]
Measure=Calc
Formula=#HourAngle#*(msHour>=2)

[cAngle2]
Measure=Calc
Formula=(-PI/2)+#HourSpace#

[mHour2]
Meter=Roundline
MeterStyle=mHour1
MeasureName=cHour2
StartAngle=[cAngle2]

[cHour3]
Measure=Calc
Formula=#HourAngle#*(msHour>=3)

[cAngle3]
Measure=Calc
Formula=(-PI/2)+#HourSpace#*2

[mHour3]
Meter=Roundline
MeterStyle=mHour1
MeasureName=cHour3
StartAngle=[cAngle3]

[cHour4]
Measure=Calc
Formula=#HourAngle#*(msHour>=4)

[cAngle4]
Measure=Calc
Formula=(-PI/2)+#HourSpace#*3

[mHour4]
Meter=Roundline
MeterStyle=mHour1
MeasureName=cHour4
StartAngle=[cAngle4]

[cHour5]
Measure=Calc
Formula=#HourAngle#*(msHour>=5)

[cAngle5]
Measure=Calc
Formula=(-PI/2)+#HourSpace#*4

[mHour5]
Meter=Roundline
MeterStyle=mHour1
MeasureName=cHour5
StartAngle=[cAngle5]

[cHour6]
Measure=Calc
Formula=#HourAngle#*(msHour>=6)

[cAngle6]
Measure=Calc
Formula=(-PI/2)+#HourSpace#*5

[mHour6]
Meter=Roundline
MeterStyle=mHour1
MeasureName=cHour6
StartAngle=[cAngle6]

[cHour7]
Measure=Calc
Formula=#HourAngle#*(msHour>=7)

[cAngle7]
Measure=Calc
Formula=(-PI/2)+#HourSpace#*6

[mHour7]
Meter=Roundline
MeterStyle=mHour1
MeasureName=cHour7
StartAngle=[cAngle7]

[cHour8]
Measure=Calc
Formula=#HourAngle#*(msHour>=8)

[cAngle8]
Measure=Calc
Formula=(-PI/2)+#HourSpace#*7

[mHour8]
Meter=Roundline
MeterStyle=mHour1
MeasureName=cHour8
StartAngle=[cAngle8]

[cHour9]
Measure=Calc
Formula=#HourAngle#*(msHour>=9)

[cAngle9]
Measure=Calc
Formula=(-PI/2)+#HourSpace#*8

[mHour9]
Meter=Roundline
MeterStyle=mHour1
MeasureName=cHour9
StartAngle=[cAngle9]

[cHour10]
Measure=Calc
Formula=#HourAngle#*(msHour>=10)

[cAngle10]
Measure=Calc
Formula=(-PI/2)+#HourSpace#*9

[mHour10]
Meter=Roundline
MeterStyle=mHour1
MeasureName=cHour10
StartAngle=[cAngle10]

[cHour11]
Measure=Calc
Formula=#HourAngle#*(msHour>=11)

[cAngle11]
Measure=Calc
Formula=(-PI/2)+#HourSpace#*10

[mHour11]
Meter=Roundline
MeterStyle=mHour1
MeasureName=cHour11
StartAngle=[cAngle11]

[cHour12]
Measure=Calc
Formula=#HourAngle#*(msHour>=12)

[cAngle12]
Measure=Calc
Formula=(-PI/2)+#HourSpace#*11

[mHour12]
Meter=Roundline
MeterStyle=mHour1
MeasureName=cHour12
StartAngle=[cAngle12]

[cHour13]
Measure=Calc
Formula=#HourAngle#*(msHour>=13)

[cAngle13]
Measure=Calc
Formula=(-PI/2)

[mHour13]
Meter=Roundline
MeasureName=cHour13
StartAngle=[cAngle13]
H=(#SecondLength#*2)
W=(#SecondLength#*2)
Solid=1
LineLength=#Hour2Length#
LineStart=#Hour2Start#
AntiAlias=1
LineColor=#Color#
DynamicVariables=1

[cHour14]
Measure=Calc
Formula=#HourAngle#*(msHour>=14)

[cAngle14]
Measure=Calc
Formula=(-PI/2)+#HourSpace#

[mHour14]
Meter=Roundline
MeterStyle=mHour13
MeasureName=cHour14
StartAngle=[cAngle14]

[cHour15]
Measure=Calc
Formula=#HourAngle#*(msHour>=15)

[cAngle15]
Measure=Calc
Formula=(-PI/2)+#HourSpace#*2

[mHour15]
Meter=Roundline
MeterStyle=mHour13
MeasureName=cHour15
StartAngle=[cAngle15]

[cHour16]
Measure=Calc
Formula=#HourAngle#*(msHour>=16)

[cAngle16]
Measure=Calc
Formula=(-PI/2)+#HourSpace#*3

[mHour16]
Meter=Roundline
MeterStyle=mHour13
MeasureName=cHour16
StartAngle=[cAngle16]

[cHour17]
Measure=Calc
Formula=#HourAngle#*(msHour>=17)

[cAngle17]
Measure=Calc
Formula=(-PI/2)+#HourSpace#*4

[mHour17]
Meter=Roundline
MeterStyle=mHour13
MeasureName=cHour17
StartAngle=[cAngle17]

[cHour18]
Measure=Calc
Formula=#HourAngle#*(msHour>=18)

[cAngle18]
Measure=Calc
Formula=(-PI/2)+#HourSpace#*5

[mHour18]
Meter=Roundline
MeterStyle=mHour13
MeasureName=cHour18
StartAngle=[cAngle18]

[cHour19]
Measure=Calc
Formula=#HourAngle#*(msHour>=19)

[cAngle19]
Measure=Calc
Formula=(-PI/2)+#HourSpace#*6

[mHour19]
Meter=Roundline
MeterStyle=mHour13
MeasureName=cHour19
StartAngle=[cAngle19]

[cHour20]
Measure=Calc
Formula=#HourAngle#*(msHour>=20)

[cAngle20]
Measure=Calc
Formula=(-PI/2)+#HourSpace#*7

[mHour20]
Meter=Roundline
MeterStyle=mHour13
MeasureName=cHour20
StartAngle=[cAngle20]

[cHour21]
Measure=Calc
Formula=#HourAngle#*(msHour>=21)

[cAngle21]
Measure=Calc
Formula=(-PI/2)+#HourSpace#*8

[mHour21]
Meter=Roundline
MeterStyle=mHour13
MeasureName=cHour21
StartAngle=[cAngle21]

[cHour22]
Measure=Calc
Formula=#HourAngle#*(msHour>=22)

[cAngle22]
Measure=Calc
Formula=(-PI/2)+#HourSpace#*9

[mHour22]
Meter=Roundline
MeterStyle=mHour13
MeasureName=cHour22
StartAngle=[cAngle22]

[cHour23]
Measure=Calc
Formula=#HourAngle#*(msHour>=23)

[cAngle23]
Measure=Calc
Formula=(-PI/2)+#HourSpace#*10

[mHour23]
Meter=Roundline
MeterStyle=mHour13
MeasureName=cHour23
StartAngle=[cAngle23]

[cHour24]
Measure=Calc
Formula=#HourAngle#*(msHour=24)

[cAngle24]
Measure=Calc
Formula=(-PI/2)+#HourSpace#*11

[mHour24]
Meter=Roundline
MeterStyle=mHour13
MeasureName=cHour24
StartAngle=[cAngle24]

[cMinute1]
Measure=Calc
Formula=(msMinute>=1)*#MinuteAngle#

[cMAngle1]
Measure=Calc
Formula=-PI/2

[mMin1]
Meter=Roundline
MeasureName=cMinute1
StartAngle=[cMAngle1]
H=(#SecondLength#*2)
W=(#SecondLength#*2)
Solid=1
LineLength=#MinuteLength#
LineStart=#MinuteStart#
AntiAlias=1
LineColor=#Color#
DynamicVariables=1

[cMinute2]
Measure=Calc
Formula=(msMinute>=2)*#MinuteAngle#

[cMAngle2]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#

[mMin2]
Meter=Roundline
MeterStyle=mMin1
MeasureName=cMinute2
StartAngle=[cMAngle2]

[cMinute3]
Measure=Calc
Formula=(msMinute>=3)*#MinuteAngle#

[cMAngle3]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*2

[mMin3]
Meter=Roundline
MeterStyle=mMin1
MeasureName=cMinute3
StartAngle=[cMAngle3]

[cMinute4]
Measure=Calc
Formula=(msMinute>=4)*#MinuteAngle#

[cMAngle4]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*3

[mMin4]
Meter=Roundline
MeterStyle=mMin1
MeasureName=cMinute4
StartAngle=[cMAngle4]

[cMinute5]
Measure=Calc
Formula=(msMinute>=5)*#MinuteAngle#

[cMAngle5]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*4

[mMin5]
Meter=Roundline
MeterStyle=mMin1
MeasureName=cMinute5
StartAngle=[cMAngle5]

[cMinute6]
Measure=Calc
Formula=(msMinute>=6)*#MinuteAngle#

[cMAngle6]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*5

[mMin6]
Meter=Roundline
MeterStyle=mMin1
MeasureName=cMinute6
StartAngle=[cMAngle6]

[cMinute7]
Measure=Calc
Formula=(msMinute>=7)*#MinuteAngle#

[cMAngle7]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*6

[mMin7]
Meter=Roundline
MeterStyle=mMin1
MeasureName=cMinute7
StartAngle=[cMAngle7]

[cMinute8]
Measure=Calc
Formula=(msMinute>=8)*#MinuteAngle#

[cMAngle8]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*7

[mMin8]
Meter=Roundline
MeterStyle=mMin1
MeasureName=cMinute8
StartAngle=[cMAngle8]

[cMinute9]
Measure=Calc
Formula=(msMinute>=9)*#MinuteAngle#

[cMAngle9]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*8

[mMin9]
Meter=Roundline
MeterStyle=mMin1
MeasureName=cMinute9
StartAngle=[cMAngle9]

[cMinute10]
Measure=Calc
Formula=(msMinute>=10)*#MinuteAngle#

[cMAngle10]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*9

[mMin10]
Meter=Roundline
MeterStyle=mMin1
MeasureName=cMinute10
StartAngle=[cMAngle10]

[cMinute11]
Measure=Calc
Formula=(msMinute>=11)*#MinuteAngle#

[cMAngle11]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*10

[mMin11]
Meter=Roundline
MeterStyle=mMin1
MeasureName=cMinute11
StartAngle=[cMAngle11]

[cMinute12]
Measure=Calc
Formula=(msMinute>=12)*#MinuteAngle#

[cMAngle12]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*11

[mMin12]
Meter=Roundline
MeterStyle=mMin1
MeasureName=cMinute12
StartAngle=[cMAngle12]

[cMinute13]
Measure=Calc
Formula=(msMinute>=13)*#MinuteAngle#

[cMAngle13]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*12

[mMin13]
Meter=Roundline
MeterStyle=mMin1
MeasureName=cMinute13
StartAngle=[cMAngle13]

[cMinute14]
Measure=Calc
Formula=(msMinute>=14)*#MinuteAngle#

[cMAngle14]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*13

[mMin14]
Meter=Roundline
MeterStyle=mMin1
MeasureName=cMinute14
StartAngle=[cMAngle14]

[cMinute15]
Measure=Calc
Formula=(msMinute>=15)*#MinuteAngle#

[cMAngle15]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*14

[mMin15]
Meter=Roundline
MeterStyle=mMin1
MeasureName=cMinute15
StartAngle=[cMAngle15]

[cMinute16]
Measure=Calc
Formula=(msMinute>=16)*#MinuteAngle#

[cMAngle16]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*15

[mMin16]
Meter=Roundline
MeterStyle=mMin1
MeasureName=cMinute16
StartAngle=[cMAngle16]

[cMinute17]
Measure=Calc
Formula=(msMinute>=17)*#MinuteAngle#

[cMAngle17]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*16

[mMin17]
Meter=Roundline
MeterStyle=mMin1
MeasureName=cMinute17
StartAngle=[cMAngle17]

[cMinute18]
Measure=Calc
Formula=(msMinute>=18)*#MinuteAngle#

[cMAngle18]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*17

[mMin18]
Meter=Roundline
MeterStyle=mMin1
MeasureName=cMinute18
StartAngle=[cMAngle18]

[cMinute19]
Measure=Calc
Formula=(msMinute>=19)*#MinuteAngle#

[cMAngle19]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*18

[mMin19]
Meter=Roundline
MeterStyle=mMin1
MeasureName=cMinute19
StartAngle=[cMAngle19]

[cMinute20]
Measure=Calc
Formula=(msMinute>=20)*#MinuteAngle#

[cMAngle20]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*19

[mMin20]
Meter=Roundline
MeterStyle=mMin1
MeasureName=cMinute20
StartAngle=[cMAngle20]

[cMinute21]
Measure=Calc
Formula=(msMinute>=21)*#MinuteAngle#

[cMAngle21]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*20

[mMin21]
Meter=Roundline
MeterStyle=mMin1
MeasureName=cMinute21
StartAngle=[cMAngle21]

[cMinute22]
Measure=Calc
Formula=(msMinute>=22)*#MinuteAngle#

[cMAngle22]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*21

[mMin22]
Meter=Roundline
MeterStyle=mMin1
MeasureName=cMinute22
StartAngle=[cMAngle22]

[cMinute23]
Measure=Calc
Formula=(msMinute>=23)*#MinuteAngle#

[cMAngle23]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*22

[mMin23]
Meter=Roundline
MeterStyle=mMin1
MeasureName=cMinute23
StartAngle=[cMAngle23]

[cMinute24]
Measure=Calc
Formula=(msMinute>=24)*#MinuteAngle#

[cMAngle24]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*23

[mMin24]
Meter=Roundline
MeterStyle=mMin1
MeasureName=cMinute24
StartAngle=[cMAngle24]

[cMinute25]
Measure=Calc
Formula=(msMinute>=25)*#MinuteAngle#

[cMAngle25]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*24

[mMin25]
Meter=Roundline
MeterStyle=mMin1
MeasureName=cMinute25
StartAngle=[cMAngle25]

[cMinute26]
Measure=Calc
Formula=(msMinute>=26)*#MinuteAngle#

[cMAngle26]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*25

[mMin26]
Meter=Roundline
MeterStyle=mMin1
MeasureName=cMinute26
StartAngle=[cMAngle26]

[cMinute27]
Measure=Calc
Formula=(msMinute>=27)*#MinuteAngle#

[cMAngle27]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*26

[mMin27]
Meter=Roundline
MeterStyle=mMin1
MeasureName=cMinute27
StartAngle=[cMAngle27]

[cMinute28]
Measure=Calc
Formula=(msMinute>=28)*#MinuteAngle#

[cMAngle28]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*27

[mMin28]
Meter=Roundline
MeterStyle=mMin1
MeasureName=cMinute28
StartAngle=[cMAngle28]

[cMinute29]
Measure=Calc
Formula=(msMinute>=29)*#MinuteAngle#

[cMAngle29]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*28

[mMin29]
Meter=Roundline
MeterStyle=mMin1
MeasureName=cMinute29
StartAngle=[cMAngle29]

[cMinute30]
Measure=Calc
Formula=(msMinute>=30)*#MinuteAngle#

[cMAngle30]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*29

[mMin30]
Meter=Roundline
MeterStyle=mMin1
MeasureName=cMinute30
StartAngle=[cMAngle30]

[cMinute31]
Measure=Calc
Formula=(msMinute>=31)*#MinuteAngle#

[cMAngle31]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*30

[mMin31]
Meter=Roundline
MeterStyle=mMin1
MeasureName=cMinute31
StartAngle=[cMAngle31]

[cMinute32]
Measure=Calc
Formula=(msMinute>=32)*#MinuteAngle#

[cMAngle32]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*31

[mMin32]
Meter=Roundline
MeterStyle=mMin1
MeasureName=cMinute32
StartAngle=[cMAngle32]

[cMinute33]
Measure=Calc
Formula=(msMinute>=33)*#MinuteAngle#

[cMAngle33]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*32

[mMin33]
Meter=Roundline
MeterStyle=mMin1
MeasureName=cMinute33
StartAngle=[cMAngle33]

[cMinute34]
Measure=Calc
Formula=(msMinute>=34)*#MinuteAngle#

[cMAngle34]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*33

[mMin34]
Meter=Roundline
MeterStyle=mMin1
MeasureName=cMinute34
StartAngle=[cMAngle34]

[cMinute35]
Measure=Calc
Formula=(msMinute>=35)*#MinuteAngle#

[cMAngle35]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*34

[mMin35]
Meter=Roundline
MeterStyle=mMin1
MeasureName=cMinute35
StartAngle=[cMAngle35]

[cMinute36]
Measure=Calc
Formula=(msMinute>=36)*#MinuteAngle#

[cMAngle36]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*35

[mMin36]
Meter=Roundline
MeterStyle=mMin1
MeasureName=cMinute36
StartAngle=[cMAngle36]

[cMinute37]
Measure=Calc
Formula=(msMinute>=37)*#MinuteAngle#

[cMAngle37]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*36

[mMin37]
Meter=Roundline
MeterStyle=mMin1
MeasureName=cMinute37
StartAngle=[cMAngle37]

[cMinute38]
Measure=Calc
Formula=(msMinute>=38)*#MinuteAngle#

[cMAngle38]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*37

[mMin38]
Meter=Roundline
MeterStyle=mMin1
MeasureName=cMinute38
StartAngle=[cMAngle38]

[cMinute39]
Measure=Calc
Formula=(msMinute>=39)*#MinuteAngle#

[cMAngle39]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*38

[mMin39]
Meter=Roundline
MeterStyle=mMin1
MeasureName=cMinute39
StartAngle=[cMAngle39]

[cMinute40]
Measure=Calc
Formula=(msMinute>=40)*#MinuteAngle#

[cMAngle40]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*39

[mMin40]
Meter=Roundline
MeterStyle=mMin1
MeasureName=cMinute40
StartAngle=[cMAngle40]

[cMinute41]
Measure=Calc
Formula=(msMinute>=41)*#MinuteAngle#

[cMAngle41]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*40

[mMin41]
Meter=Roundline
MeterStyle=mMin1
MeasureName=cMinute41
StartAngle=[cMAngle41]

[cMinute42]
Measure=Calc
Formula=(msMinute>=42)*#MinuteAngle#

[cMAngle42]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*41

[mMin42]
Meter=Roundline
MeterStyle=mMin1
MeasureName=cMinute42
StartAngle=[cMAngle42]

[cMinute43]
Measure=Calc
Formula=(msMinute>=43)*#MinuteAngle#

[cMAngle43]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*42

[mMin43]
Meter=Roundline
MeterStyle=mMin1
MeasureName=cMinute43
StartAngle=[cMAngle43]

[cMinute44]
Measure=Calc
Formula=(msMinute>=44)*#MinuteAngle#

[cMAngle44]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*43

[mMin44]
Meter=Roundline
MeterStyle=mMin1
MeasureName=cMinute44
StartAngle=[cMAngle44]

[cMinute45]
Measure=Calc
Formula=(msMinute>=45)*#MinuteAngle#

[cMAngle45]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*44

[mMin45]
Meter=Roundline
MeterStyle=mMin1
MeasureName=cMinute45
StartAngle=[cMAngle45]

[cMinute46]
Measure=Calc
Formula=(msMinute>=46)*#MinuteAngle#

[cMAngle46]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*45

[mMin46]
Meter=Roundline
MeterStyle=mMin1
MeasureName=cMinute46
StartAngle=[cMAngle46]

[cMinute47]
Measure=Calc
Formula=(msMinute>=47)*#MinuteAngle#

[cMAngle47]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*46

[mMin47]
Meter=Roundline
MeterStyle=mMin1
MeasureName=cMinute47
StartAngle=[cMAngle47]

[cMinute48]
Measure=Calc
Formula=(msMinute>=48)*#MinuteAngle#

[cMAngle48]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*47

[mMin48]
Meter=Roundline
MeterStyle=mMin1
MeasureName=cMinute48
StartAngle=[cMAngle48]

[cMinute49]
Measure=Calc
Formula=(msMinute>=49)*#MinuteAngle#

[cMAngle49]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*48

[mMin49]
Meter=Roundline
MeterStyle=mMin1
MeasureName=cMinute49
StartAngle=[cMAngle49]

[cMinute50]
Measure=Calc
Formula=(msMinute>=50)*#MinuteAngle#

[cMAngle50]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*49

[mMin50]
Meter=Roundline
MeterStyle=mMin1
MeasureName=cMinute50
StartAngle=[cMAngle50]

[cMinute51]
Measure=Calc
Formula=(msMinute>=51)*#MinuteAngle#

[cMAngle51]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*50

[mMin51]
Meter=Roundline
MeterStyle=mMin1
MeasureName=cMinute51
StartAngle=[cMAngle51]

[cMinute52]
Measure=Calc
Formula=(msMinute>=52)*#MinuteAngle#

[cMAngle52]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*51

[mMin52]
Meter=Roundline
MeterStyle=mMin1
MeasureName=cMinute52
StartAngle=[cMAngle52]

[cMinute53]
Measure=Calc
Formula=(msMinute>=53)*#MinuteAngle#

[cMAngle53]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*52

[mMin53]
Meter=Roundline
MeterStyle=mMin1
MeasureName=cMinute53
StartAngle=[cMAngle53]

[cMinute54]
Measure=Calc
Formula=(msMinute>=54)*#MinuteAngle#

[cMAngle54]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*53

[mMin54]
Meter=Roundline
MeterStyle=mMin1
MeasureName=cMinute54
StartAngle=[cMAngle54]

[cMinute55]
Measure=Calc
Formula=(msMinute>=55)*#MinuteAngle#

[cMAngle55]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*54

[mMin55]
Meter=Roundline
MeterStyle=mMin1
MeasureName=cMinute55
StartAngle=[cMAngle55]

[cMinute56]
Measure=Calc
Formula=(msMinute>=56)*#MinuteAngle#

[cMAngle56]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*55

[mMin56]
Meter=Roundline
MeterStyle=mMin1
MeasureName=cMinute56
StartAngle=[cMAngle56]

[cMinute57]
Measure=Calc
Formula=(msMinute>=57)*#MinuteAngle#

[cMAngle57]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*56

[mMin57]
Meter=Roundline
MeterStyle=mMin1
MeasureName=cMinute57
StartAngle=[cMAngle57]

[cMinute58]
Measure=Calc
Formula=(msMinute>=58)*#MinuteAngle#

[cMAngle58]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*57

[mMin58]
Meter=Roundline
MeterStyle=mMin1
MeasureName=cMinute58
StartAngle=[cMAngle58]

[cMinute59]
Measure=Calc
Formula=(msMinute>=59)*#MinuteAngle#

[cMAngle59]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*58

[mMin59]
Meter=Roundline
MeterStyle=mMin1
MeasureName=cMinute59
StartAngle=[cMAngle59]

[cSecond1]
Measure=Calc
Formula=(msSecond>=1)*#MinuteAngle#

[cSAngle1]
Measure=Calc
Formula=-PI/2

[cSec1]
Meter=Roundline
MeasureName=cSecond1
StartAngle=[cSAngle1]
H=(#SecondLength#*2)
W=(#SecondLength#*2)
Solid=1
LineLength=#SecondLength#
LineStart=#SecondStart#
AntiAlias=1
LineColor=#Color#
DynamicVariables=1

[cSecond2]
Measure=Calc
Formula=(msSecond>=2)*#MinuteAngle#

[cSAngle2]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#

[cSec2]
Meter=Roundline
MeterStyle=cSec1
MeasureName=cSecond2
StartAngle=[cSAngle2]

[cSecond3]
Measure=Calc
Formula=(msSecond>=3)*#MinuteAngle#

[cSAngle3]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*2

[cSec3]
Meter=Roundline
MeterStyle=cSec1
MeasureName=cSecond3
StartAngle=[cSAngle3]

[cSecond4]
Measure=Calc
Formula=(msSecond>=4)*#MinuteAngle#

[cSAngle4]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*3

[cSec4]
Meter=Roundline
MeterStyle=cSec1
MeasureName=cSecond4
StartAngle=[cSAngle4]

[cSecond5]
Measure=Calc
Formula=(msSecond>=5)*#MinuteAngle#

[cSAngle5]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*4

[cSec5]
Meter=Roundline
MeterStyle=cSec1
MeasureName=cSecond5
StartAngle=[cSAngle5]

[cSecond6]
Measure=Calc
Formula=(msSecond>=6)*#MinuteAngle#

[cSAngle6]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*5

[cSec6]
Meter=Roundline
MeterStyle=cSec1
MeasureName=cSecond6
StartAngle=[cSAngle6]

[cSecond7]
Measure=Calc
Formula=(msSecond>=7)*#MinuteAngle#

[cSAngle7]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*6

[cSec7]
Meter=Roundline
MeterStyle=cSec1
MeasureName=cSecond7
StartAngle=[cSAngle7]

[cSecond8]
Measure=Calc
Formula=(msSecond>=8)*#MinuteAngle#

[cSAngle8]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*7

[cSec8]
Meter=Roundline
MeterStyle=cSec1
MeasureName=cSecond8
StartAngle=[cSAngle8]

[cSecond9]
Measure=Calc
Formula=(msSecond>=9)*#MinuteAngle#

[cSAngle9]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*8

[cSec9]
Meter=Roundline
MeterStyle=cSec1
MeasureName=cSecond9
StartAngle=[cSAngle9]

[cSecond10]
Measure=Calc
Formula=(msSecond>=10)*#MinuteAngle#

[cSAngle10]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*9

[cSec10]
Meter=Roundline
MeterStyle=cSec1
MeasureName=cSecond10
StartAngle=[cSAngle10]

[cSecond11]
Measure=Calc
Formula=(msSecond>=11)*#MinuteAngle#

[cSAngle11]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*10

[cSec11]
Meter=Roundline
MeterStyle=cSec1
MeasureName=cSecond11
StartAngle=[cSAngle11]

[cSecond12]
Measure=Calc
Formula=(msSecond>=12)*#MinuteAngle#

[cSAngle12]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*11

[cSec12]
Meter=Roundline
MeterStyle=cSec1
MeasureName=cSecond12
StartAngle=[cSAngle12]

[cSecond13]
Measure=Calc
Formula=(msSecond>=13)*#MinuteAngle#

[cSAngle13]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*12

[cSec13]
Meter=Roundline
MeterStyle=cSec1
MeasureName=cSecond13
StartAngle=[cSAngle13]

[cSecond14]
Measure=Calc
Formula=(msSecond>=14)*#MinuteAngle#

[cSAngle14]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*13

[cSec14]
Meter=Roundline
MeterStyle=cSec1
MeasureName=cSecond14
StartAngle=[cSAngle14]

[cSecond15]
Measure=Calc
Formula=(msSecond>=15)*#MinuteAngle#

[cSAngle15]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*14

[cSec15]
Meter=Roundline
MeterStyle=cSec1
MeasureName=cSecond15
StartAngle=[cSAngle15]

[cSecond16]
Measure=Calc
Formula=(msSecond>=16)*#MinuteAngle#

[cSAngle16]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*15

[cSec16]
Meter=Roundline
MeterStyle=cSec1
MeasureName=cSecond16
StartAngle=[cSAngle16]

[cSecond17]
Measure=Calc
Formula=(msSecond>=17)*#MinuteAngle#

[cSAngle17]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*16

[cSec17]
Meter=Roundline
MeterStyle=cSec1
MeasureName=cSecond17
StartAngle=[cSAngle17]

[cSecond18]
Measure=Calc
Formula=(msSecond>=18)*#MinuteAngle#

[cSAngle18]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*17

[cSec18]
Meter=Roundline
MeterStyle=cSec1
MeasureName=cSecond18
StartAngle=[cSAngle18]

[cSecond19]
Measure=Calc
Formula=(msSecond>=19)*#MinuteAngle#

[cSAngle19]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*18

[cSec19]
Meter=Roundline
MeterStyle=cSec1
MeasureName=cSecond19
StartAngle=[cSAngle19]

[cSecond20]
Measure=Calc
Formula=(msSecond>=20)*#MinuteAngle#

[cSAngle20]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*19

[cSec20]
Meter=Roundline
MeterStyle=cSec1
MeasureName=cSecond20
StartAngle=[cSAngle20]

[cSecond21]
Measure=Calc
Formula=(msSecond>=21)*#MinuteAngle#

[cSAngle21]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*20

[cSec21]
Meter=Roundline
MeterStyle=cSec1
MeasureName=cSecond21
StartAngle=[cSAngle21]

[cSecond22]
Measure=Calc
Formula=(msSecond>=22)*#MinuteAngle#

[cSAngle22]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*21

[cSec22]
Meter=Roundline
MeterStyle=cSec1
MeasureName=cSecond22
StartAngle=[cSAngle22]

[cSecond23]
Measure=Calc
Formula=(msSecond>=23)*#MinuteAngle#

[cSAngle23]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*22

[cSec23]
Meter=Roundline
MeterStyle=cSec1
MeasureName=cSecond23
StartAngle=[cSAngle23]

[cSecond24]
Measure=Calc
Formula=(msSecond>=24)*#MinuteAngle#

[cSAngle24]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*23

[cSec24]
Meter=Roundline
MeterStyle=cSec1
MeasureName=cSecond24
StartAngle=[cSAngle24]

[cSecond25]
Measure=Calc
Formula=(msSecond>=25)*#MinuteAngle#

[cSAngle25]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*24

[cSec25]
Meter=Roundline
MeterStyle=cSec1
MeasureName=cSecond25
StartAngle=[cSAngle25]

[cSecond26]
Measure=Calc
Formula=(msSecond>=26)*#MinuteAngle#

[cSAngle26]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*25

[cSec26]
Meter=Roundline
MeterStyle=cSec1
MeasureName=cSecond26
StartAngle=[cSAngle26]

[cSecond27]
Measure=Calc
Formula=(msSecond>=27)*#MinuteAngle#

[cSAngle27]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*26

[cSec27]
Meter=Roundline
MeterStyle=cSec1
MeasureName=cSecond27
StartAngle=[cSAngle27]

[cSecond28]
Measure=Calc
Formula=(msSecond>=28)*#MinuteAngle#

[cSAngle28]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*27

[cSec28]
Meter=Roundline
MeterStyle=cSec1
MeasureName=cSecond28
StartAngle=[cSAngle28]

[cSecond29]
Measure=Calc
Formula=(msSecond>=29)*#MinuteAngle#

[cSAngle29]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*28

[cSec29]
Meter=Roundline
MeterStyle=cSec1
MeasureName=cSecond29
StartAngle=[cSAngle29]

[cSecond30]
Measure=Calc
Formula=(msSecond>=30)*#MinuteAngle#

[cSAngle30]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*29

[cSec30]
Meter=Roundline
MeterStyle=cSec1
MeasureName=cSecond30
StartAngle=[cSAngle30]

[cSecond31]
Measure=Calc
Formula=(msSecond>=31)*#MinuteAngle#

[cSAngle31]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*30

[cSec31]
Meter=Roundline
MeterStyle=cSec1
MeasureName=cSecond31
StartAngle=[cSAngle31]

[cSecond32]
Measure=Calc
Formula=(msSecond>=32)*#MinuteAngle#

[cSAngle32]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*31

[cSec32]
Meter=Roundline
MeterStyle=cSec1
MeasureName=cSecond32
StartAngle=[cSAngle32]

[cSecond33]
Measure=Calc
Formula=(msSecond>=33)*#MinuteAngle#

[cSAngle33]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*32

[cSec33]
Meter=Roundline
MeterStyle=cSec1
MeasureName=cSecond33
StartAngle=[cSAngle33]

[cSecond34]
Measure=Calc
Formula=(msSecond>=34)*#MinuteAngle#

[cSAngle34]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*33

[cSec34]
Meter=Roundline
MeterStyle=cSec1
MeasureName=cSecond34
StartAngle=[cSAngle34]

[cSecond35]
Measure=Calc
Formula=(msSecond>=35)*#MinuteAngle#

[cSAngle35]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*34

[cSec35]
Meter=Roundline
MeterStyle=cSec1
MeasureName=cSecond35
StartAngle=[cSAngle35]

[cSecond36]
Measure=Calc
Formula=(msSecond>=36)*#MinuteAngle#

[cSAngle36]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*35

[cSec36]
Meter=Roundline
MeterStyle=cSec1
MeasureName=cSecond36
StartAngle=[cSAngle36]

[cSecond37]
Measure=Calc
Formula=(msSecond>=37)*#MinuteAngle#

[cSAngle37]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*36

[cSec37]
Meter=Roundline
MeterStyle=cSec1
MeasureName=cSecond37
StartAngle=[cSAngle37]

[cSecond38]
Measure=Calc
Formula=(msSecond>=38)*#MinuteAngle#

[cSAngle38]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*37

[cSec38]
Meter=Roundline
MeterStyle=cSec1
MeasureName=cSecond38
StartAngle=[cSAngle38]

[cSecond39]
Measure=Calc
Formula=(msSecond>=39)*#MinuteAngle#

[cSAngle39]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*38

[cSec39]
Meter=Roundline
MeterStyle=cSec1
MeasureName=cSecond39
StartAngle=[cSAngle39]

[cSecond40]
Measure=Calc
Formula=(msSecond>=40)*#MinuteAngle#

[cSAngle40]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*39

[cSec40]
Meter=Roundline
MeterStyle=cSec1
MeasureName=cSecond40
StartAngle=[cSAngle40]

[cSecond41]
Measure=Calc
Formula=(msSecond>=41)*#MinuteAngle#

[cSAngle41]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*40

[cSec41]
Meter=Roundline
MeterStyle=cSec1
MeasureName=cSecond41
StartAngle=[cSAngle41]

[cSecond42]
Measure=Calc
Formula=(msSecond>=42)*#MinuteAngle#

[cSAngle42]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*41

[cSec42]
Meter=Roundline
MeterStyle=cSec1
MeasureName=cSecond42
StartAngle=[cSAngle42]

[cSecond43]
Measure=Calc
Formula=(msSecond>=43)*#MinuteAngle#

[cSAngle43]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*42

[cSec43]
Meter=Roundline
MeterStyle=cSec1
MeasureName=cSecond43
StartAngle=[cSAngle43]

[cSecond44]
Measure=Calc
Formula=(msSecond>=44)*#MinuteAngle#

[cSAngle44]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*43

[cSec44]
Meter=Roundline
MeterStyle=cSec1
MeasureName=cSecond44
StartAngle=[cSAngle44]

[cSecond45]
Measure=Calc
Formula=(msSecond>=45)*#MinuteAngle#

[cSAngle45]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*44

[cSec45]
Meter=Roundline
MeterStyle=cSec1
MeasureName=cSecond45
StartAngle=[cSAngle45]

[cSecond46]
Measure=Calc
Formula=(msSecond>=46)*#MinuteAngle#

[cSAngle46]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*45

[cSec46]
Meter=Roundline
MeterStyle=cSec1
MeasureName=cSecond46
StartAngle=[cSAngle46]

[cSecond47]
Measure=Calc
Formula=(msSecond>=47)*#MinuteAngle#

[cSAngle47]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*46

[cSec47]
Meter=Roundline
MeterStyle=cSec1
MeasureName=cSecond47
StartAngle=[cSAngle47]

[cSecond48]
Measure=Calc
Formula=(msSecond>=48)*#MinuteAngle#

[cSAngle48]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*47

[cSec48]
Meter=Roundline
MeterStyle=cSec1
MeasureName=cSecond48
StartAngle=[cSAngle48]

[cSecond49]
Measure=Calc
Formula=(msSecond>=49)*#MinuteAngle#

[cSAngle49]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*48

[cSec49]
Meter=Roundline
MeterStyle=cSec1
MeasureName=cSecond49
StartAngle=[cSAngle49]

[cSecond50]
Measure=Calc
Formula=(msSecond>=50)*#MinuteAngle#

[cSAngle50]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*49

[cSec50]
Meter=Roundline
MeterStyle=cSec1
MeasureName=cSecond50
StartAngle=[cSAngle50]

[cSecond51]
Measure=Calc
Formula=(msSecond>=51)*#MinuteAngle#

[cSAngle51]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*50

[cSec51]
Meter=Roundline
MeterStyle=cSec1
MeasureName=cSecond51
StartAngle=[cSAngle51]

[cSecond52]
Measure=Calc
Formula=(msSecond>=52)*#MinuteAngle#

[cSAngle52]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*51

[cSec52]
Meter=Roundline
MeterStyle=cSec1
MeasureName=cSecond52
StartAngle=[cSAngle52]

[cSecond53]
Measure=Calc
Formula=(msSecond>=53)*#MinuteAngle#

[cSAngle53]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*52

[cSec53]
Meter=Roundline
MeterStyle=cSec1
MeasureName=cSecond53
StartAngle=[cSAngle53]

[cSecond54]
Measure=Calc
Formula=(msSecond>=54)*#MinuteAngle#

[cSAngle54]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*53

[cSec54]
Meter=Roundline
MeterStyle=cSec1
MeasureName=cSecond54
StartAngle=[cSAngle54]

[cSecond55]
Measure=Calc
Formula=(msSecond>=55)*#MinuteAngle#

[cSAngle55]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*54

[cSec55]
Meter=Roundline
MeterStyle=cSec1
MeasureName=cSecond55
StartAngle=[cSAngle55]

[cSecond56]
Measure=Calc
Formula=(msSecond>=56)*#MinuteAngle#

[cSAngle56]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*55

[cSec56]
Meter=Roundline
MeterStyle=cSec1
MeasureName=cSecond56
StartAngle=[cSAngle56]

[cSecond57]
Measure=Calc
Formula=(msSecond>=57)*#MinuteAngle#

[cSAngle57]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*56

[cSec57]
Meter=Roundline
MeterStyle=cSec1
MeasureName=cSecond57
StartAngle=[cSAngle57]

[cSecond58]
Measure=Calc
Formula=(msSecond>=58)*#MinuteAngle#

[cSAngle58]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*57

[cSec58]
Meter=Roundline
MeterStyle=cSec1
MeasureName=cSecond58
StartAngle=[cSAngle58]

[cSecond59]
Measure=Calc
Formula=(msSecond>=59)*#MinuteAngle#

[cSAngle59]
Measure=Calc
Formula=(-PI/2)+#MinuteSpace#*58

[cSec59]
Meter=Roundline
MeterStyle=cSec1
MeasureName=cSecond59
StartAngle=[cSAngle59]

EDIT:
Added seconds indicators.

Seahorse · Post by **Seahorse** » April 24th, 2011, 6:47 pm

You sir are a genius...

I'd still like to figure out the other method, though I'm going to play with yours now and see if I can get my head around it

Later:

So inner ring is 0001-1100 and the second ring is 1200-2359, if I understand this right, how can this be adjusted to 1-12 like an analogue wallclock?

Currently I am attempting to add another ring for seconds by duplicating the minutes and failing heroically:) still at least find and replace makes it simple to do I guess

Seahorse · Post by **Seahorse** » April 25th, 2011, 9:25 am

Much later (tomorrow):

Funny how typos & spelling mistakes are easier to spot in the morning; source of the random second hands that didn't move. OK, so I have changed the Hour variable to %I solving my first question regarding 24/12 hour measures, adding the 3rd ring (having removed the second hour one) also sorted and I'm using 3 different colours to make testing easier.

It took me a little head scratching to figure out why the second had "ring" was offset until I realised minutes & hours H & W were defined by MinuteLength in both instances (both hastily edited to #SecondLength#).

Yes I am a flea standing on the shoulder of a giant, but I am learning new things all the time and this morning I feel pretty good

Now all I have to do is figure out how to extend the circular Aero Blur 10 pixels wider than the clock and change the colours to something more subtle.

Capture.JPG

Post by **smurfier** » April 25th, 2011, 11:18 am

Ok... the blur region is pretty easy. Where you have the Height and Width of all the roundlines, add 20. Figure out what that value is then set that to BlurRegion. I had to add 1 to my version because it was a bit smaller than it needed to be so you will probably have to play with the number a little to make it just perfect. I also have to admit that I don't like using glass right now as the edges aren't exactly smooth.

Also, a suggestion. Add a ring between the hour ring and minutes that indicates whether it's pm or not.

Bitmap usage for clock?

Bitmap usage for clock?

Re: Bitmap usage for clock?

Re: Bitmap usage for clock?

Re: Bitmap usage for clock?

Re: Bitmap usage for clock?

Re: Bitmap usage for clock?

Re: Bitmap usage for clock?

Re: Bitmap usage for clock?

Re: Bitmap usage for clock?

Re: Bitmap usage for clock?