Did the threadsPerCore value change back to 2, or is it still 1? (You will have to reopen the file to see if it changed).Zop308 wrote:I did the above steps (including line 80 delete in CpuConfig.lua) and the virtual cores still have bad values. 'threadsPerCore' set to 1 someplace else?
However, this is a very minor bug so no worries. Moving to a new house is a major time eater. Good luck on the move.
Thanks, James.
It is currently April 28th, 2024, 2:15 am
ModernGadgets 1.8.2
-
- Posts: 660
- Joined: June 25th, 2015, 7:02 pm
- Location: The Sky, USA
Re: ModernGadgets 1.2.0 - New look, familiar gadgets
-
- Posts: 5
- Joined: November 27th, 2016, 6:37 pm
Re: ModernGadgets 1.2.0 - New look, familiar gadgets
In CPU.ini 'threadsPerCore' does change back to 2.raiguard wrote:Did the threadsPerCore value change back to 2, or is it still 1? (You will have to reopen the file to see if it changed).
Also double checked in @Resources\Scripts\Config\CpuConfig.lua, that line 80, 'threadsPerCore = 1' IS DELETED. I located '@Resources' in 'C:\Users\xxxxx\Documents\Rainmeter\Skins\ModernGadgets'. I am assuming that is the proper location.
Thanks, James.
EDIT: Oops, forgot to say line 80 DELETED
-
- Posts: 1
- Joined: June 18th, 2017, 7:59 pm
Re: ModernGadgets 1.2.0 - New look, familiar gadgets
Greetings,
Thank you for the great gadgets. This is allowing me to move away from Windows Gadgets to Rainmeter.
Regarding the CPU gauge--I would like to disable/not display the individual cores. I've looked at the ini and commented certain sections. The best I was able to do was to get it do not report the data anymore, but it does not collapse the gauge (still takes up the space). What is the best way to do this? Thanks again.
Thank you for the great gadgets. This is allowing me to move away from Windows Gadgets to Rainmeter.
Regarding the CPU gauge--I would like to disable/not display the individual cores. I've looked at the ini and commented certain sections. The best I was able to do was to get it do not report the data anymore, but it does not collapse the gauge (still takes up the space). What is the best way to do this? Thanks again.
-
- Posts: 660
- Joined: June 25th, 2015, 7:02 pm
- Location: The Sky, USA
Re: ModernGadgets 1.2.0 - New look, familiar gadgets
Open CPU.ini (right-click on CPU Meter, click "Edit Skin") and scroll down to line 200, which is 'Formula=%NUMBER_OF_PROCESSORS%'. Comment that out (put a semicolon and a space before the contents of the line), then uncomment the line below it, 'Formula=20' and change the value to 0. Save the file and refresh CPU Meter. Next, open CPU Meter settings and enable "Average CPU Usage Graph".snovvman wrote:Greetings,
Thank you for the great gadgets. This is allowing me to move away from Windows Gadgets to Rainmeter.
Regarding the CPU gauge--I would like to disable/not display the individual cores. I've looked at the ini and commented certain sections. The best I was able to do was to get it do not report the data anymore, but it does not collapse the gauge (still takes up the space). What is the best way to do this? Thanks again.
So it should look like this:
Code: Select all
; Formula=%NUMBER_OF_PROCESSORS%
Formula=0
You do not have the required permissions to view the files attached to this post.
-
- Posts: 21
- Joined: July 3rd, 2013, 2:37 pm
Re: ModernGadgets 1.2.0 - New look, familiar gadgets
Anyone know what Im missing?
Thanks!
Cant seem to get Core 0 Clock to not be red, Ive tried various combinations. also core 1&2 have same temps and 3&4 same temps?Thanks!
You do not have the required permissions to view the files attached to this post.
-
- Posts: 860
- Joined: August 22nd, 2016, 11:32 pm
- Location: Surrey, B.C., Canada
Re: ModernGadgets 1.2.0 - New look, familiar gadgets
I have the same processor, you can try these values and see if it works.
You do not have the required permissions to view the files attached to this post.
The only source of knowledge is experience. Albert Einstein
Deviant Art Page
Deviant Art Page
-
- Posts: 21
- Joined: July 3rd, 2013, 2:37 pm
Re: ModernGadgets 1.2.0 - New look, familiar gadgets
Thanks I tried '0x6000000' but its the same, maybe its because Ive overclocked slightly, Ill try default later today and see if it lists like yours.CyberTheWorm wrote:I have the same processor, you can try these values and see if it works.Capture.PNG
-
- Posts: 660
- Joined: June 25th, 2015, 7:02 pm
- Location: The Sky, USA
Re: ModernGadgets 1.2.0 - New look, familiar gadgets
Unfortunately it appears that your CPU does not have clock speed sensors through HWiNFO. In this case, CPU Meter is using an alternative (albeit less accurate) built-in Rainmeter measure. Sorry about that.gffmac wrote:Anyone know what Im missing?
example.png
Cant seem to get Core 0 Clock to not be red, Ive tried various combinations. also core 1&2 have same temps and 3&4 same temps?
Thanks!
-
- Developer
- Posts: 22631
- Joined: April 19th, 2009, 11:02 pm
- Location: Fort Hunt, Virginia, USA
Re: ModernGadgets 1.2.0 - New look, familiar gadgets
Couldn't you get there with the PerfMon plugin using
Processor Information / Processor Frequency
Processor Information / Processor Frequency
-
- Posts: 660
- Joined: June 25th, 2015, 7:02 pm
- Location: The Sky, USA
Re: ModernGadgets 1.2.0 - New look, familiar gadgets
The alternative that CPU Meter uses when the HWiNFO sensors are unavailable is the Power Plugin.jsmorley wrote:Couldn't you get there with the PerfMon plugin using
Processor Information / Processor Frequency
Code: Select all
; Cpu Clock Speed
[MeasureCpuClockSpeed]
Measure=Plugin
Plugin=PowerPlugin
PowerState=MHz
Disabled=(#showCpuClock# = 0) ? 1 : 0