It'll be called ModernGadgets. If you want, you can check out the GitHub repository linked in my signature. I should be done with it by the end of the month.jslegers wrote:How will it be named so I can watch out voor it.
It is currently April 19th, 2024, 3:09 am
illustro Gadgets 1.0.0
-
- Posts: 660
- Joined: June 25th, 2015, 7:02 pm
- Location: The Sky, USA
Re: illustro Gadgets 1.0.0
-
- Posts: 5
- Joined: September 9th, 2016, 3:12 pm
Re: illustro Gadgets 1.0.0
Is the new version readyiamanai wrote:It'll be called ModernGadgets. If you want, you can check out the GitHub repository linked in my signature. I should be done with it by the end of the month.
-
- Posts: 660
- Joined: June 25th, 2015, 7:02 pm
- Location: The Sky, USA
Re: illustro Gadgets 1.0.0
Not completely. Some personal crap happened, so I haven't been able to finish it off in the time frame I had set. The gadgets themselves are pretty much complete, but the configuration skins still need lots of work.jslegers wrote:Is the new version ready
If you want to be a tester to get the gadgets early you can find my github in my signature.
-
- Posts: 9
- Joined: January 24th, 2013, 10:56 am
Re: illustro Gadgets 1.0.0
Thanks for the wonderful Modern Gadgets. I was on Rainmeter 3.21, but updated to 4.0 to use your gadgets. Everything worked out of the box but had to manually set HWInfo id's for motherboard and CPU fan. Everything working fine. Thanks !
Just a note: In the HWConfig Tool for the CPU, if you just copy and paste a sensor id into the setting and then refresh the gadget, it doesn't work. You have to paste the new sensor id value into the setting for the motherboard id setting, then hit ENTER on your keyboard. That wasn't intuitive. I had to figure it out. Maybe a small note on the CPU gadget config tool would help.
Just a note: In the HWConfig Tool for the CPU, if you just copy and paste a sensor id into the setting and then refresh the gadget, it doesn't work. You have to paste the new sensor id value into the setting for the motherboard id setting, then hit ENTER on your keyboard. That wasn't intuitive. I had to figure it out. Maybe a small note on the CPU gadget config tool would help.
-
- Posts: 660
- Joined: June 25th, 2015, 7:02 pm
- Location: The Sky, USA
Re: illustro Gadgets 1.0.0
First off: You replied to the wrong forum post.te7 wrote:Thanks for the wonderful Modern Gadgets. I was on Rainmeter 3.21, but updated to 4.0 to use your gadgets. Everything worked out of the box but had to manually set HWInfo id's for motherboard and CPU fan. Everything working fine. Thanks !
Just a note: In the HWConfig Tool for the CPU, if you just copy and paste a sensor id into the setting and then refresh the gadget, it doesn't work. You have to paste the new sensor id value into the setting for the motherboard id setting, then hit ENTER on your keyboard. That wasn't intuitive. I had to figure it out. Maybe a small note on the CPU gadget config tool would help.
The pressing enter thing is unavoidable. That's just how the InputText plugin works. I've literally never had anyone else complain about that. I'll think about it.
-
- Posts: 25
- Joined: February 11th, 2018, 4:08 pm
Re: illustro Gadgets 1.0.0
Hello,
I am a big fan of illustro skins and your drive meter skin is the best as it is combined. I have 5 internal drives and 2 network drives. I have tried to edit the skin to reflect the nw drives with the drive letters in skin settings but no success. The skin doesn't detect the nw drives i think. I know that you are not working on this skin anymore but I have to ask: is it possible to add the nw drives to the drive meters skin?
Thanks for all the work you have done so far.
I am a big fan of illustro skins and your drive meter skin is the best as it is combined. I have 5 internal drives and 2 network drives. I have tried to edit the skin to reflect the nw drives with the drive letters in skin settings but no success. The skin doesn't detect the nw drives i think. I know that you are not working on this skin anymore but I have to ask: is it possible to add the nw drives to the drive meters skin?
Thanks for all the work you have done so far.
-
- Posts: 660
- Joined: June 25th, 2015, 7:02 pm
- Location: The Sky, USA
Re: illustro Gadgets 1.0.0
Wow, I didn’t think anyone used iG anymore.cnone wrote:Hello,
I am a big fan of illustro skins and your drive meter skin is the best as it is combined. I have 5 internal drives and 2 network drives. I have tried to edit the skin to reflect the nw drives with the drive letters in skin settings but no success. The skin doesn't detect the nw drives i think. I know that you are not working on this skin anymore but I have to ask: is it possible to add the nw drives to the drive meters skin?
Thanks for all the work you have done so far.
Thr Drives Meter in iG only supports Disks C-L. If your network drives are in other disk slots from those, then they will not show up by default.
To get them to display, you need to edit the variables file for Drives Meter. It should be in the @Resources folder in iG’s skins folder. In that file there are variables called ‘d01’, ‘d02’, and so on. You can change these values to display the disk letters that you want.
Due to a mistake on my part, you will also need to edit the name meters for the disks that you change to display the correct drive letter.
If you have any other questions feel free to ask.
-
- Posts: 25
- Joined: February 11th, 2018, 4:08 pm
Re: illustro Gadgets 1.0.0
Thank you for the fast reply,raiguard wrote:Wow, I didn’t think anyone used iG anymore.
Thr Drives Meter in iG only supports Disks C-L. If your network drives are in other disk slots from those, then they will not show up by default.
To get them to display, you need to edit the variables file for Drives Meter. It should be in the @Resources folder in iG’s skins folder. In that file there are variables called ‘d01’, ‘d02’, and so on. You can change these values to display the disk letters that you want.
Due to a mistake on my part, you will also need to edit the name meters for the disks that you change to display the correct drive letter.
If you have any other questions feel free to ask.
My question is actually about mapped network drives. I have tried to change the variables as per your instructions but no luck. I have even tried to map the drive on letter "K" as it is supported by IG by default and nothing changed. Am I missing something or IG drive meter doesn't support mapped drives at all?
-
- Posts: 660
- Joined: June 25th, 2015, 7:02 pm
- Location: The Sky, USA
Re: illustro Gadgets 1.0.0
If it’s not working then you’re out of luck. Drives Meter uses the FreeDiskSpace plugin to detect drives. If the drive isn’t showing up, it’s not being detected by FreeDiskSpace and there’s nothing I can do about it. Sorry.cnone wrote:Thank you for the fast reply,
My question is actually about mapped network drives. I have tried to change the variables as per your instructions but no luck. I have even tried to map the drive on letter "K" as it is supported by IG by default and nothing changed. Am I missing something or IG drive meter doesn't support mapped drives at all?
-
- Posts: 25
- Joined: February 11th, 2018, 4:08 pm
Re: illustro Gadgets 1.0.0
Looks like the plugin cant detect the drives then. Anyways thank you again materaiguard wrote:If it’s not working then you’re out of luck. Drives Meter uses the FreeDiskSpace plugin to detect drives. If the drive isn’t showing up, it’s not being detected by FreeDiskSpace and there’s nothing I can do about it. Sorry.