Page 4 of 4
Re: PluginBacklight - control the backlight of laptop or monitor
Posted: May 16th, 2017, 3:11 pm
by 220v110
If my notebook's screen turns off after inactivity, there is no way to turn it on, except to replug vga cable. But then rainmeter crashes.
Report.wer says:
Re: PluginBacklight - control the backlight of laptop or monitor
Posted: August 6th, 2017, 10:25 am
by Epsonmaster
Hi,
first of all: Great Plugin!
It works great for me except that i can only control one monitor.
I have 3 similar 27" Dell Monitors with 2 connected by DVI and one by Display Port. All monitors have DDC/CI enabled. (The one which works is connected by DVI)
The problem seems to be, that the plugin can't find the other monitors.
If I set the Monitor index to 1 the log lists only Monitor 1 and if I set the index to 2 or 3 I get a warning in log saying "Backlight.dll: Fail to control monitor, no more tries"
Any ideas?
Thanks,
Chris
Re: PluginBacklight - control the backlight of laptop or monitor
Posted: August 15th, 2017, 7:27 am
by balala
Epsonmaster wrote:It works great for me except that i can only control one monitor.
I have 3 similar 27" Dell Monitors with 2 connected by DVI and one by Display Port. All monitors have DDC/CI enabled. (The one which works is connected by DVI)
The problem seems to be, that the plugin can't find the other monitors.
If I set the Monitor index to 1 the log lists only Monitor 1 and if I set the index to 2 or 3 I get a warning in log saying "Backlight.dll: Fail to control monitor, no more tries"
Any ideas?
Sorry, me personally can't help at this point, because I'm using one single monitor. Sorry...
Re: PluginBacklight - control the backlight of laptop or monitor
Posted: October 23rd, 2021, 11:30 pm
by cthunsthrall
I think the plugin has a problem with either recent versions of rainmeter or recent versions of windows. Upon waking up from sleep, the skin stops working and needs to be reloaded by switching layouts or something. This never happened to me before in some years of using this plugin but just kinda started spontaneously a month or two ago.
Re: PluginBacklight - control the backlight of laptop or monitor
Posted: June 18th, 2022, 3:53 pm
by Jeff
Me, clueless: Oh man, I sure love my actively updated operating system, I sure hope updating my Windows 10 machine and rolling all the security patches will not break my most useful skin.
Me, after:
After updating Windows yesterday, the plugin has stopped working, the Rainmeter log reports
"Plugin: Unable to load "Backlight" (error 126) (Backlight\Backlight_Simple.ini - [MeasureBacklight])".
Downgrading Rainmeter didn't work, so it's not a problem specific to Rainmeter, it's probably a change made in the
Windows Management Interface that broke the plugin
Policy=Forcelevel didn't work either, though it shouldn't have worked since the plugin fails to load in the first place
EDIT: I love
these source code comments
Re: PluginBacklight - control the backlight of laptop or monitor
Posted: June 19th, 2022, 6:31 pm
by balala
Jeff wrote: ↑June 18th, 2022, 3:53 pm
After updating Windows yesterday, the plugin has stopped working, the Rainmeter log reports
"Plugin: Unable to load "Backlight" (error 126) (Backlight\Backlight_Simple.ini - [MeasureBacklight])".
Downgrading Rainmeter didn't work, so it's not a problem specific to Rainmeter, it's probably a change made in the
Windows Management Interface that broke the plugin
Policy=Forcelevel didn't work either, though it shouldn't have worked since the plugin fails to load in the first place
I'd try to reinstall the plugin, this way:
- Remove the plugin (to do this, you have to manually remove the c:\<YourName>\Laci\AppData\Roaming\Rainmeter\Plugins\Backlight.dll file - take care that AppData is a hidden folder).
- Restart Rainmeter (or at least refresh all).
- Reinstall a skin (for instance Backlight_0.9.3.rmskin), containing the plugin.
I'm not sure at all this might help, it probably doesn't, however just to make sure, maybe would worth a try.
Re: PluginBacklight - control the backlight of laptop or monitor
Posted: September 25th, 2022, 1:45 pm
by zivallh
Hello guys!
I have the same issue and I figure out that if the UpdateDivider is "1" or it's not there, Rainmeter will crash, if you're using an app in a fullscreen mood or after sleep
it has to be "UpdateDivider=-1", but this won't run the "IfCondition" probably
Any solution for this?
Code: Select all
[Backlight]
Measure=Plugin
Plugin=Backlight
Monitor=-1
Divide=10
Showlog=1
UpdateDivider=-1
IfCondition=(Backlight < 1)
IfTrueAction=[!SetOption MeterIcon ImageName "#@#Brightness-zero.png"][!Redraw]
IfCondition2=(Backlight > 1) && (Backlight < 30)
IfTrueAction2=[!SetOption MeterIcon ImageName "#@#Brightness-low.png"][!Redraw]
IfCondition3=(Backlight > 30) && (Backlight < 70)
IfTrueAction3=[!SetOption MeterIcon ImageName "#@#Brightness-med.png"][!Redraw]
IfCondition4=(Backlight > 70)
IfTrueAction4=[!SetOption MeterIcon ImageName "#@#Brightness-high.png"][!Redraw]
DynamicVariables=1
Re: PluginBacklight - control the backlight of laptop or monitor
Posted: October 7th, 2022, 8:12 pm
by Cariboudjan
zivallh wrote: ↑September 25th, 2022, 1:45 pm
Hello guys!
I have the same issue and I figure out that if the UpdateDivider is "1" or it's not there, Rainmeter will crash, if you're using an app in a fullscreen mood or after sleep
it has to be "UpdateDivider=-1", but this won't run the "IfCondition" probably
Any solution for this?
Code: Select all
[Backlight]
Measure=Plugin
Plugin=Backlight
Monitor=-1
Divide=10
Showlog=1
UpdateDivider=-1
IfCondition=(Backlight < 1)
IfTrueAction=[!SetOption MeterIcon ImageName "#@#Brightness-zero.png"][!Redraw]
IfCondition2=(Backlight > 1) && (Backlight < 30)
IfTrueAction2=[!SetOption MeterIcon ImageName "#@#Brightness-low.png"][!Redraw]
IfCondition3=(Backlight > 30) && (Backlight < 70)
IfTrueAction3=[!SetOption MeterIcon ImageName "#@#Brightness-med.png"][!Redraw]
IfCondition4=(Backlight > 70)
IfTrueAction4=[!SetOption MeterIcon ImageName "#@#Brightness-high.png"][!Redraw]
DynamicVariables=1
Have another process use [!UpdateMeasure Backlight] to update on demand and add IfConditionMode=1 to [Backlight]