Look here to learn how to set up and configure HWiNFO.thebombdigiti wrote: Is that something I have to look on the HWInfo site how to do? Or is it on the ModernGadgets page?
It is currently April 19th, 2024, 2:48 am
ModernGadgets 1.8.2
-
- Posts: 660
- Joined: June 25th, 2015, 7:02 pm
- Location: The Sky, USA
Re: ModernGadgets 1.5.0
-
- Posts: 660
- Joined: June 25th, 2015, 7:02 pm
- Location: The Sky, USA
Re: ModernGadgets 1.5.0
v1.5.1 is out! This release is filled to bursting with bugfixes, some of which were quite major (turns out that the moonrise/moonset times have been an day off this entire time!). It also includes improved Network Meter iconography and some other minor tweaks. You can grab it from the update notification.
-
- Posts: 81
- Joined: May 28th, 2010, 2:29 pm
Re: ModernGadgets 1.5.1
25% CPU. Causes Rainmeter to hang.
-
- Posts: 660
- Joined: June 25th, 2015, 7:02 pm
- Location: The Sky, USA
Re: ModernGadgets 1.5.1
I'll need more details. What are your system specs? What skins are you running? Did you enable hardware acceleration in the Rainmeter settings?
-
- Posts: 2
- Joined: May 8th, 2019, 2:27 am
Re: ModernGadgets 1.5.1
Hi,
With release 1.5.1, I have noticed a minor issue with the Network Meter's display of the external IP. On one Windows 7 VM, where I use a VPN, the external IP shows the VPN IP regardless of whether to VPN is connected or not. When disconnecting the VPN, the external address is no longer updating to show my normal public IP. On a second Windows 7 VM, the Network Meter's external IP just sits at "fetching..." and also does not display the public IP address.
Both VM's had NetMonitor installed. On both NetMonitor was uninstalled to see if that would have an effect but it does not appear to have made a difference.
If there is any information that I can provide or anything else I can do to assist with diagnosing this issue, please let me know.
Thanks for all you efforts!
R
With release 1.5.1, I have noticed a minor issue with the Network Meter's display of the external IP. On one Windows 7 VM, where I use a VPN, the external IP shows the VPN IP regardless of whether to VPN is connected or not. When disconnecting the VPN, the external address is no longer updating to show my normal public IP. On a second Windows 7 VM, the Network Meter's external IP just sits at "fetching..." and also does not display the public IP address.
Both VM's had NetMonitor installed. On both NetMonitor was uninstalled to see if that would have an effect but it does not appear to have made a difference.
If there is any information that I can provide or anything else I can do to assist with diagnosing this issue, please let me know.
Thanks for all you efforts!
R
-
- Rainmeter Sage
- Posts: 2603
- Joined: March 23rd, 2015, 5:26 pm
Re: ModernGadgets 1.5.1
As you noticed, uninstalling NetMonitor won't make any difference; the service just watches your adapters and reports the number of bytes in and out. To help debug your issue, open the Rainmeter About log and connect/disconnect your VPN. You should see messages in the log if it detects changes to the active network adapter. If it does not report a change is detected, that could be the source of the issue.
That said, there is a chance that some code is missing in the Network Meter. Edit the skin and find the measure [MeasureInternalIp]. Add the following line at the end:
Save the file, refresh the Network Meter, and see if the issue is resolved.
That said, there is a chance that some code is missing in the Network Meter. Edit the skin and find the measure [MeasureInternalIp]. Add the following line at the end:
Code: Select all
OnChangeAction=[!SetOptionGroup ActiveNet Refresh "ya"][!UpdateMeasureGroup ActiveNet][!UpdateMeasure MeasureNetworkIcon]
-
- Posts: 2
- Joined: May 8th, 2019, 2:27 am
Re: ModernGadgets 1.5.1
Hi,
Thanks for the quick response. I did take a look at the skin and found the code you indicated but it was under the [MeasureAdapterName] section (and it also included a log message action). It was not present in the [MeasureInternalIp] section. I have not yet added it there as the InternalIP seems to refresh OK on VPN connect/disconnect, it is the ExternalIP that exhibits the issue.
I did also enable logging and then looked at the log as you suggested and did find something there that seemed to point to the cause of the problem. I found the following noted in the log at the point I clicked on the "Refresh external IP" button
NOTE (09:46:00.263) ModernGadgets\NetworkMeter\NetworkMeter.ini: Refreshing external IP address
DBUG (09:46:00.794) ModernGadgets\NetworkMeter\NetworkMeter.ini - [MeasureExternalIp]: Fetching: https://api.ipify.org/
ERRO (09:46:03.104) ModernGadgets\NetworkMeter\NetworkMeter.ini - [MeasureExternalIp]: (Fetch error) The server name or address could not be resolved (ErrorCode=12007)
Following the inline documentation in the skin file, I changed the URL to an alternate service, reloaded the skin, and now the External IP refreshes as it should.
Thanks for pointing me in the right direction!
R
Thanks for the quick response. I did take a look at the skin and found the code you indicated but it was under the [MeasureAdapterName] section (and it also included a log message action). It was not present in the [MeasureInternalIp] section. I have not yet added it there as the InternalIP seems to refresh OK on VPN connect/disconnect, it is the ExternalIP that exhibits the issue.
I did also enable logging and then looked at the log as you suggested and did find something there that seemed to point to the cause of the problem. I found the following noted in the log at the point I clicked on the "Refresh external IP" button
NOTE (09:46:00.263) ModernGadgets\NetworkMeter\NetworkMeter.ini: Refreshing external IP address
DBUG (09:46:00.794) ModernGadgets\NetworkMeter\NetworkMeter.ini - [MeasureExternalIp]: Fetching: https://api.ipify.org/
ERRO (09:46:03.104) ModernGadgets\NetworkMeter\NetworkMeter.ini - [MeasureExternalIp]: (Fetch error) The server name or address could not be resolved (ErrorCode=12007)
Following the inline documentation in the skin file, I changed the URL to an alternate service, reloaded the skin, and now the External IP refreshes as it should.
Thanks for pointing me in the right direction!
R
-
- Posts: 4
- Joined: March 21st, 2019, 12:04 pm
Re: ModernGadgets 1.5.1
Hi All,
i have this error msg in the rainmeter log.
Time: "Format=%H:%M" invalid (ModernGadgets\WeatherMeter\WeatherMeter.ini - [MeasureSunCalcSunriseTime])
time format in the Weather meter settings is " System default"
Any hints ?
kind regards
i have this error msg in the rainmeter log.
Time: "Format=%H:%M" invalid (ModernGadgets\WeatherMeter\WeatherMeter.ini - [MeasureSunCalcSunriseTime])
time format in the Weather meter settings is " System default"
Any hints ?
kind regards
-
- Posts: 4
- Joined: March 21st, 2019, 12:04 pm
Re: ModernGadgets 1.5.1
Just updated to 1.5.1 and the error is gone.
Keep up the good work !
Keep up the good work !
-
- Posts: 2
- Joined: June 14th, 2019, 9:14 pm
Re: ModernGadgets 1.5.1
Just installed this... WOW! Great work!
I dumped 8GadgetPack literally 2 min after installing this skin.
The only thing I'm missing (I know others have brought this up, so consider this a +1 vote) is a real ping monitor like this one...
Pretty please?
I dumped 8GadgetPack literally 2 min after installing this skin.
The only thing I'm missing (I know others have brought this up, so consider this a +1 vote) is a real ping monitor like this one...
Pretty please?