ATI Plugin

[dotnet]

@DC_PLAYER
My Wife is Brasil
The floating Point Measure comes from the Plugin, because this I get from the Adapters.
If you want an Integer like value, I make it in next BETA.
You can change this in Skin per MeasureType=1 (You get Integervalue) [MeasureType=0 (You get floating Point value)]
or something like that.
I write if the Beta is released in next days

@serjsilva
Don't Overdrive function?!? I'm Sorry but you can't get this 3 values
THX for this information, I look
But GPU-Z shows the Temperature and Fan-Speeds under the register "Sensors"?!?

[serjsilva]

These are the values that GPU-Z show.
I added the image so that it would be easier to understand it =)

[dotnet]

@serjsilva
Okay, THX...
Sensors available, Fan Speed (Percent) and Temperature.

If your card is working ingame, the MemIO is near the same as DispIO or goes DispIO up and MemIO not so much?!?

Have you test to change AdapterID in Skin (get Adapter with CCC -> Rightclick)? You get with an Adapter this values?!?
Or pls test the CF-Test Plugin and make a picture of this values from ATIPlugin (CF-Test) Skin. [7 Post on Site 3]

[serjsilva]

I added an image with what you asked.

The temperature was about after 10/15 mins of playing COD4.

I also changed Adapter ID in skin; I got the same results. =)

[dotnet]

@serjsilva
Same results? I thinked that, but THX for your work.
But you closed COD for this?!? Or run in Background (non Full-Mode -> Windowed)?
The Temps goes down fast And the usage Mem is low...
GPU-Z can't get ShaderIO Temp and FanSpeedPercent and VCC...
THX for this!

In next Beta I create a measure for you, i write it and you can get a value that you can write me

[serjsilva]

I was running COD in background.
I also play it will low details, so normally the temperature doesn't rise above 60º.

Thanks! I will look forward for that next beta.

[dotnet]

New Beta is ready her is the first pic of it before I put it to Download
(I want insert more Display Measures...)

pic.png

[dotnet]

Next pic before the next beta comes.
You see there many Displayskins (My Card can handle 6 Displays -< you see NumOfDisplays = 6???)
But you see two are Connected and Mapped and on this I have the first
NEW Bang to Set Brighness of the Connected and Mapped Display
There is on this two Displays the current value 0 -> non from Display,..., from CCC (Driver Brightness Forcement)
With this you can get all Brightness infos and Set the current value per BANG.
I write others too...
Contrast, Saturation, Hue, and Display Color Temperature.
All 5 gets (current, max, min, default, step) and the current set per value or plus step.
This mean you can Set "Brightness to a value between min and max or push a Button to go up per Step (min the measured step))

All understand?!?

pic2.png

[serjsilva]

At the moment I don't have any cables that allow to test all those new functions, but I can see if it recognizes all the outputs.

You are really developing a very complete and interactive plugin.


Congrats!

[dotnet]

At the moment I don't have any cables that allow to test all those new functions, but I can see if it recognizes all the outputs.

How you mean this?!? I don't understand...

The 6 Displays support my card and to Displays Connected on the Display 4 and 5 and this Displays connect per DVI-I and DVI-D Input on card.
if your Card have 2, a DVI and VGA maybe... And you have connect a Display on this, the Skin puts out this information.

more than the 5 DisplayConnectors at my Card... maybe Component? maybe SVideo? maybe RCA 3 Component? maybe
HDMI-Type B? maybe per ATI CV Dongle?
If your card have an Input for a Display, the Plugin puts all out