It is currently February 17th, 2020, 5:20 am

Argus Monitor plugin 1.1.0.1

Share and get help with Plugins and Addons
kingzizedk
Posts: 3
Joined: January 23rd, 2020, 8:37 am

Re: Argus Monitor plugin 1.1.0.1

Post by kingzizedk »

argusmonitor wrote:
January 26th, 2020, 12:08 pm
I updated Leo's plugin with the new structure.
Thank you.
This is very nice. I have already updated to newest version of Argus and edited my Measure-data in Rainmeter.

One question, would it be possible to output temperatures with decimals? Right now 28,1C and 28,9C shows 28.0C in Rainmeter. The data is in Argus with decimal, so could you please parse that to the plugin/rainmeter as well?
User avatar
argusmonitor
Posts: 4
Joined: January 16th, 2020, 4:36 pm

Re: Argus Monitor plugin 1.1.0.1

Post by argusmonitor »

Sadly, that's currently not possible as the API only provides -- with a few exceptions -- integer values. The reason being that most sensors also only have integer temperature readings. The reason why you might still see one decimal place in some cases is because of the filtering which is applied to some of the values. So currently the Plugin has only integer values available to be displayed.

I am thinking about creating an API to provide access the all the data in a standardized way. But currently there is more important stuff on our priority list and as I mentioned, Argus Monitor is only a hobby project we do in our spare time. So I cannot say when and if it will be available.
kingzizedk
Posts: 3
Joined: January 23rd, 2020, 8:37 am

Re: Argus Monitor plugin 1.1.0.1

Post by kingzizedk »

argusmonitor wrote:
January 28th, 2020, 7:01 pm
Sadly, that's currently not possible as the API only provides -- with a few exceptions -- integer values. The reason being that most sensors also only have integer temperature readings. The reason why you might still see one decimal place in some cases is because of the filtering which is applied to some of the values. So currently the Plugin has only integer values available to be displayed.

I am thinking about creating an API to provide access the all the data in a standardized way. But currently there is more important stuff on our priority list and as I mentioned, Argus Monitor is only a hobby project we do in our spare time. So I cannot say when and if it will be available.
Thank you for the reply.
That is some very fair and valid considerations. I understand that it is not high priority.
It is my Rainmeter meter-setup that adds the .0C so its true that Rainmeter only recieves the integer value from the API.

However the same point applies inside Argus, when using a Temp-sensopr as source of Fan-control, it only operates in integer values as well (despite the program showing temp with 1 decimal, which causes very big jumps in fan-speed (for example 30C->31C will cause my fanspeed to increase from 30% to 38% because the curve is very steep when using water-temp (30C=20% and 40C=100%)
User avatar
argusmonitor
Posts: 4
Joined: January 16th, 2020, 4:36 pm

Re: Argus Monitor plugin 1.1.0.1

Post by argusmonitor »

I am open for suggestions what we could do inside Argus Monitor to improve fan control performance under these conditions (other than recommending to use a less steep fan control curve).
Currently, we have the option to average the temperatures of CPU and GPU over time and to use hysteresis, both should help to reduce the impact of short spikes in temperature. There is the additional idea to add a slope limit for the control output (basically preventing the fans from changing speed very rapidly). In case there are further suggestions, please let me know.